Owner's Manual
Table Of Contents
- Instructions
- Thank you for purchasing a Canon product
- Safety Precautions
- General Precautions
- Nomenclature
- Attaching and Detaching the Lens
- Preparing to Shoot (Extending/Retracting the Lens)
- Setting the Focus Mode
- Setting the Focusing Distance Range
- Control Ring
- Image Stabilizer
- Hood (Sold Separately)
- Extenders (Sold Separately)
- Tripod Mount
- Filters (Sold separately)
- Specifications
- Canon Interchangeable Lens Instructions
- Warranty
ENG-9
Focus mode switch
Focusing ring
To shoot in autofocus (AF) mode, set the focus
mode switch to AF.
To use only manual focusing (MF), set the focus
mode switch to MF, and focus by turning the
focusing ring.
3.
Setting the Focus Mode
z
Be sure to update the camera’s firmware so it is
compatible with this lens.
z
The range-finding area with the camera* after
updating the firmware is an area of the image
plane of approx. 40% horizontal x approx. 60%
vertical.
This remains constant even if an extender is
attached.
z
Quickly turning the focusing ring may result in
delayed focus.
* As of March 2020: EOS R, EOS Ra, EOS RP
z
The lens’ focusing ring is electronic.
z
When AF operation is set to [ONE SHOT],
manual focus is possible after autofocusing
has been completed by continuing to press the
shutter button halfway. (Full-time manual focus)
However, the camera settings need to be
changed. Please refer to the camera’s
instructions for details.