Owner's Manual

Selecting the AF Method
• Spot AF / 1-point AF / Expand AF area: -~- / Expand AF area:
Around / Zone AF / Large Zone AF: Vertical / Large Zone AF:
Horizontal*
You can manually set the AF point or Zone AF frame. Here, 1-point AF
screens are used as an example.
1 Check the AF point.
• The AF point ( 1) will appear.
• With Expand AF area: -~- or Expand AF
area: Around, adjacent AF points are
also displayed.
• With Zone AF, Large Zone AF: Vertical,
or Large Zone AF: Horizontal, the
(1) specified Zone AF frame is displayed.
2
Move the AF point.
• Press the < r.p > button use the < ~:~ >
L::.:J ' # ••
to move the AF point into position for
focusing, then press< @> (but note that
with some lenses, it may not move to
the edge of the screen).
• To center the AF point while using < ~f~ >,
press<~:~> straight in.
• You can also focus by tapping a position
on the screen.
• To center the AF point or Zone AF frame,
tap[~] or press the< @ >.
137
I