Owner's Manual

3.
Select an option to configure.
Automatic transfer
Select [Enable] for automatic image transfer to the FTP server
immediately after shooting. You can continue shooting still photos as
usual while images are being transferred.
Caution
Before shooting, make sure a card is in the camera. If you
shoot without recording images, they cannot be transferred.
Automatic transfer of movies during recording is not
supported. After recording, transfer movies as described in
Transferring Multiple Images at Once or Adding a Caption
Before Transfer.
Images cannot be erased during image transfer.
Note
During continuous shooting, images are transferred to the
FTP server in the order they are captured.
Captured images are also stored on the card.
Any images for which transfer fails or is interrupted will be
transferred automatically when the connection is recovered
( ). These images can also be transferred together manually
at a later time ( ).
Any changes to network settings (such as FTP server
settings) before automatic FTP transfer begins will prevent
automatic transfer.
621