Getting Started ENGLISH • Make sure you read this guide, including the “Safety Instructions” (= 2) section, before using the printer. • Reading this guide will help you learn to use the printer properly. • Store this guide safely so that you can use it in the future.
Safety Instructions • Be sure to read these instructions in order to operate the product safely. • Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING Denotes the risk of serious injury or death. • Use only power sources specified in this instruction manual for use with the product. • Do not disassemble or modify the product. • Do not expose the product to strong shocks or vibration. • Do not touch any exposed internal parts.
• Follow any indications to turn off the product in places where its use is forbidden. Not doing so may cause other equipment to malfunction due to the effect of electromagnetic waves and even result in accidents. CAUTION Denotes the risk of injury. • Do not touch any parts inside the product. This may cause injury. Before Use • Images printed with this product are to be used for personal enjoyment. Unauthorized printing of copyrighted material is prohibited.
Names of Parts (1) (3) (2) (4) (5) (6) (7) (8) (10) (9) (1) (2) (3) (4) (5) (6) (11) CHARGE lamp STATUS lamp Power button Charging terminal Forced shutdown switch Eject lever (7) (8) QR code label Ink cassette compartment cover (9) Delivery outlet (10) Paper compartment cover (11) Open button • Place the printer on a table or other flat, stable surface. Never place the printer on an unstable or tilted surface.
Lamp indications STATUS lamp Off CHARGE lamp Off Status Power off (Not charged) Blinks slowly green Charging in progress (Power off) Lights green Charging complete (Power off)*1 Blinks slowly white Off Printer start-up in progress Blinks white Off Processing... Blinks quickly white Off Remove the printed paper.
Preparations Charging the battery 1 Connect the printer and the charging USB AC adapter (sold separately) with the accessory charging cable. The CHARGE lamp begins to blink green and charging starts. When the CHARGE lamp lights up green, charging is complete. Installing the app The smartphone application SELPHY Photo Layout is needed to print with this product. 1 Download and install the latest version of SELPHY Photo Layout.
Preparing the printer and printing This section describes how to turn on the power, load the paper, load the ink cassette, register the printer (QR code), print, and turn off the power. 1 Turn on the power. Hold down the Power button until the STATUS lamp begins to blink white, then wait until the STATUS lamp lights up. 2 Load the paper. Press the Open button to release the lock, and open the paper compartment cover.
3 Load the ink cassette. Open the ink cassette compartment cover. Insert the correctly oriented new ink cassette into the printer until it clicks into place. 4 Connect and register the printer using the QR code. Follow the instructions displayed on the smartphone screen and connect and register the printer using the QR code. Close the ink cassette compartment cover.
5 Print. Print the images with SELPHY Photo Layout. When printing is finished, remove the paper from the printer. 6 Turn off the power. After use, hold down the Power button until the STATUS lamp turns off.
Printing Precautions • Set the paper with the printing surface (the surface without the Canon logo) facing downward, being careful not to touch the printing surface. • Do not use paper that has already been printed on or that has written text or other markings. • The paper extends from the delivery outlet multiple times during printing. Do not pull on the paper until the message indicating to remove the paper is displayed on the smartphone. • Do not interrupt communication until printing is finished.
Specifications Dimensions Weight Operating temperature Operating humidity Rated input Printing method Resolution Gradation Paper tray capacity Paper size Printing range Printable number of sheets Printing speed (per sheet) Approx. 102.2 × 143.3 × 31.0 mm (4.02 × 5.65 × 1.23 in.) (Excluding protrusions) Approx. 445 g (15.70 oz.) (printer body only) 5 °C - 40 °C (41 - 104 °F) 20 - 80% DC 5.0 V ±0.5 V, max.
Troubleshooting If you think the printer may have malfunctioned, first refer to the examples below and check the printer. If the status does not improve even after checking the relevant items, contact a Customer Support Help Desk. Power The power does not turn on. • Check the battery level. • If the battery does not charge, press the Forced shutdown switch (= 4) with a thin rod and then charge the battery again. Charging The battery cannot be charged. • The battery cannot be charged during printing.
A charging error occurs. (STATUS lamp: blinks slowly red, CHARGE lamp: blinks slowly green) • Charging will pause when the printer is a certain temperature or higher. This is not a malfunction. Disconnect the battery charger, turn off the power, and wait for the printer to cool down. Charging errors will occur more easily when printing continuously, when the ambient temperature is high, and when the inside of the printer is hot. Charging takes a long time or a charging error occurs.
The smartphone screen colors differ from the printed colors. • The color expression method differs for smartphone screens and printing. Colors also differ according to the environment (lighting color and intensity) in which the screen is viewed and the screen color adjustments. Printing takes time. • Printing will pause when the printer is a certain temperature or higher. This is not a malfunction. Wait a bit before printing again, or turn off the power and wait for the printer to cool down.
Paper is not ejected from the delivery outlet. • If the paper extends partially from the front of the printer, pull out the paper. However, if the paper cannot be pulled out by lightly gripping it with your fingers, do not pull excessively on the paper. In this case, turn the power off and then on again repeatedly until the paper is ejected. If you accidentally turn off the power during printing, turn on the power again and wait until the paper is ejected.
App The QR code cannot be scanned. • Check that there is no shadow on the QR code and that the QR code is being scanned from the front. • Some smartphones may be unable to scan the QR code well. In this case, register the printer manually. The message “This photo cannot be used.” is displayed. • If “This photo cannot be used.” is displayed by the app, the image size may be too large. Shrink, trim, or otherwise reduce the image size and then try to print again.
Storing printed photos • Use a permanent marker to write characters on photos. • To prevent discoloration of printed surfaces, avoid storing photos in places subject to temperatures above 40°C (104°F), humid or dusty places, and places subject to direct sunlight.
Daily handling • Do not expose the product to strong force or vibration. This may cause paper jams or other malfunction. • Do not expose the product to insecticides or volatile substances. Also do not allow the product to contact rubber or vinyl products for long periods of time. This may cause the exterior to degrade.
Wi-Fi (Wireless LAN) Precautions • This product is embedded with a wireless device. The model number is CD1158 (including WLAN module model WM321). • Countries and Regions Permitting WLAN Use Use of WLAN is restricted in some countries and regions, and illegal use may be punishable under national or local regulations. To avoid violating WLAN regulations, visit the Canon website to check where use is allowed.
Radio Wave Interference Precautions This product may receive interference from other devices that emit radio waves. To avoid interference, be sure to use this product as far away as possible from such devices, or avoid using the devices at the same time as this product. Hereby, Canon Inc. declares that this equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: http://www.canon-europe.
Security Precautions Because Wi-Fi uses radio waves to transmit signals, security precautions more stringent than when using a LAN cable are required. Keep the following points in mind when using Wi-Fi. • Transmission monitoring Third parties with malicious intent may monitor Wi-Fi transmissions and attempt to acquire the data you are sending. • Unauthorized network access Third parties with malicious intent may use this product illegally if they are able to view the information contained in the QR code.
CAUTION DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATIONS. -India onlyThis product is not to be disposed of with your household waste, according to the E-Waste (Management) Rules, 2016. This product should be handed over to a designated collection point, e.g., to an authorized collection site for recycling waste electrical and electronic equipment (EEE).
FCC Notice (Printer, Model CD1158 Systems) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
FCC/IC Notice Model: CD1158 (including WLAN Module Model WM321, FCC ID: AZD321 / IC: 498J-321) This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body.
Only for European Union and EEA (Norway, Iceland and Liechtenstein) These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE Directive (2012/19/EU), the Battery Directive (2006/66/EC) and/or national legislation implementing those Directives.
Disclaimer • Reprinting, transmitting, or storing in a retrieval system any part of this guide without the permission of Canon is prohibited. • Canon reserves the right to change the contents of this guide at any time without prior notice. • Illustrations in this guide may differ slightly from the actual equipment. • The above items notwithstanding, Canon accepts no liability for damages due to mistaken operation of the products.
