User's Manual

Removal

Open the cover.

Set the power switch to < >.

Check that the access lamp (1) is off, then open the cover.

If [Saving...] is displayed on the screen, close the cover.

Remove the card.

CFexpress card: Press the card eject button (2) to eject the card.

SD card: Gently press the card in, then release it to eject it.

Pull the card straight out, then close the cover.

Caution

Do not remove cards immediately after a red [ ] icon is displayed as you are

shooting. Cards may be hot, due to high internal camera temperature. Set the power

switch to < > and stop shooting for a while before removing cards. Removing hot

cards immediately after shooting may cause you to drop and damage them. Be careful

when removing cards.