Owner's Manual

11
You can check the registered information of a paired remote controller
or remove a registration from the menu screen of the camera.
When the remote controller is paired correctly, the 12-digit number on
the back of the remote controller (the Bluetooth address) is displayed
on the camera’s LCD monitor. If the number is incorrect, remove the
registration of remote controller and perform pairing again. For the
operation procedure, refer to the page regarding BR-E1 in the Camera
Instruction Manual.
To use a paired (registered) remote controller with another camera or to
perform pairing again, remove the registration of the remote controller.
For the operation procedure, refer to the page regarding BR-E1 in the
Camera Instruction Manual.
Checking Registered Information/
Removing Registration
Checking Registered Information
Removing Registration