Owner's Manual
Table Of Contents
- Wireless Remote Control Instruction Manual
- Introduction
- Conventions Used in this Manual
- Safety Precautions
- Handling Precautions
- Holding the Remote Controller
- Cautions for Using the Remote Controller
- Nomenclature
- Connecting the Remote Controller and Camera
- Checking Registered Information/Removing Registration
- Shooting Still Photos
- Shooting Movies
- Operating the Power Zoom Adapter
- Replacing the Battery
- Specifications
- Indicator Lamp Status
- Wireless Communication Function
- Index
- Remote Control BR-E1 Startup Guide
- Wireless Remote Control BR-E1 Preliminary Notes
- Tripod Grip HG-100TBR Instructions
16
Type: Remote controller
Compliance standards: Bluetooth Specification Version 4.1
(Bluetooth low energy technology)
Transmission method: GFSK modulation
Operating distance: Approx. 5 m/16.4 ft. from the camera in any direction
* With no obstructions between the remote controller
and camera and no radio interference
Power: Lithium button cell battery CR2032
Battery life: Approx. one year
Dimensions (W x H x D): Approx. 27.0 x 91.5 x 12.0 mm/1.06 x 3.60 x 0.47 in.
Weight: Approx. 14 g/0.49 oz. (excluding battery)
Working temperature range: 0°C - 40°C / 32°F - 104°F
Working humidity: 85% or less
All the data above is based on Canon’s testing standards.
Product specifications and the exterior are subject to change without notice.
* When focusing manually, the lamp lights up when still photo shooting is
performed.
* Depending on the settings of camera’s Custom Controls (switching of the button
functions), the indicator lamp lights up when the still photo shooting is
performed.
Specifications
Indicator Lamp Status
Indicator Lamp Status
Lights Up
Pairing complete
AF achieved
Started bulb exposure/movie shooting
Blinking
Start pairing
Stopped bulb exposure/movie shooting
Rapid Blinking
Error
AF not possible