Owner's Manual
Table Of Contents
- Wireless Remote Control Instruction Manual
- Introduction
- Conventions Used in this Manual
- Safety Precautions
- Handling Precautions
- Holding the Remote Controller
- Cautions for Using the Remote Controller
- Nomenclature
- Connecting the Remote Controller and Camera
- Checking Registered Information/Removing Registration
- Shooting Still Photos
- Shooting Movies
- Operating the Power Zoom Adapter
- Replacing the Battery
- Specifications
- Indicator Lamp Status
- Wireless Communication Function
- Index
- Remote Control BR-E1 Startup Guide
- Wireless Remote Control BR-E1 Preliminary Notes
- Tripod Grip HG-100TBR Instructions
Wireless Remote Control BR-E1
11
Preliminary Notes
The Wireless Remote Control BR-E1
is
a wireless remote controller that is compatible
with Bluetooth® low energy technology {hereafter "Bluetooth").
Pairing the remote controller with a Bluetooth-compatible Canon digital camera• enables
the following operations to be performed wirelessly (with
an
operating distance
of
approx. 5 m/16.4 ft.
in
any direction).
Detailed Instruction Manuals (PDF files) can be downloaded from the Canon Web site.
Connect
to
the internet and access the following Canon Web site.
www.canon.com/icpd
Safety Precautions
The following precautions are provided to prevent harm or injury to yourself and others.
Make sure to thoroughly understand and follow these precautions before using the
product.
If you experience any malfunctions. problems. or damage to the product. contact
the nearest Canon Service Center
or
the dealer from whom you purchased the
product.
6 Warnings:
Follow
the
warnings
below.
Otherwise.
death
or
serious
injuries may result.
•
To
prevent fire, excessive heat, chemical leakage, explosions, and electrical shock,
follow the safeguards below:
•
Do
not
use
any
batteries
not
specified
in
the
Instruction
Manual.
Do
not
use
any
home-made
or
modified batteries,
or
the
product
if it
is
damaged
.
•
Do
not short-circuit, disassemble, or modify the battery.
Do
not apply heat
or
solder
to the battery.
Do
not expose the battery
to
fire
or
water.
Do
not subject the battery
to strong physical shock.
•
Do
not insert the battery's plus and minus ends incorrectly.
• When disposing of a battery, insulate the electrical contacts with tape. Contact with
other metallic objects or batteries may cause a fire or an explosion.
• If the battery leaks, changes color, deforms, or emits smoke or fumes, remove it
immediately.
Be
careful not
to
get burned
in
the process.
It
may cause a fire, electrical
shock or burns if
you
keep using
it.
• Keep the battery and battery cover, etc. out of the reach
of
children and infants.
If a child or infant swallows the battery
or
battery cover, etc. consult a physician
immediately. Battery chemicals may harm the stomach and intestines.
• Before using the product inside
an
airplane or hospital, check if it
is
allowed.
Electromagnetic waves emitted by the product may interfere with the plane's
instruments or the hospital's medical equipment.
• A thorough explanation of how to use the product by an adult
is
required when the
product is used by children. Supervise children while they are using the product.
Incorrect usage may result in electrical shock or injury.
• Be careful not
to
get the product wet. If you drop the product
in
the water
or
if water
or metal get inside the product, promptly remove the battery. This is to prevent fire,
electrical shock. and burns.
• Do not use paint thinner, benzene. or other organic solvents to clean the product.
Doing so may cause fire
or
a health hazard.
6Cautions: Follow
the
cautions
below.
Otherwise, physical
injury
or
property
damage
may
result.
• Do not insert your finger into the holes
of
the product. It may become stuck.
Handling Precautions
•
Do
not immerse the product
in
water. Wipe off any water droplets with a dry and clean
cloth. If the product is exposed to salty air, wipe it with a clean, well-wrung wet cloth.
Wireless Communication Function
■
Countries and Regions Permitting Wireless Communication Function Use
Use
of
wireless communication function is restricted in some countries and regions,
and illegal use may be punishable under national or local regulations.
To
avoid
violating wireless regulations. visit the Canon Web site to check where use is allowed.
Note that Canon cannot be held liable for any problems arising from wireless
communication function use
in
other countries
and
regions.
■
Model Number
BR-E1: DS586111 (including Bluetooth module model: WM500)
FCC/IC NOTICE
Model: D5586111 (including Bluetooth Module Model: WM500, FCC ID: AZD500/
IC:
498J-500)
This device complies with Part 15
of
FCC Rules and Industry Canada's licence-exempt
RSSs. Operation is subject to the following two conditions: ( 1) this device may not cause
harmful interference, and (2) this device must accept any interference received. including
interference that may cause undesired operation.
This transmitter must not be co-located
or
operated
in
conjunction with any other
antenna or transmitter except Canon accessories supplied
or
designated for this product.
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio freque·ncy (RF) Exposure Guidelines
and RSS-102
of
the IC radio frequency (RF) Exposure rules. This equipment has very
low levels of
RF
energy that are deemed to comply without testing of specific absorption
rate (SAR).
Hereby, Canon
Inc.
declares that this equipment
is
in
compliance
with
Directive 2014/53/EU.
The full text of the
EU
declaration
of
conformity
is
available at the following internet
address:
http://www.canon-europe.com/ce-documentation
Bluetooth Frequency range: 2402MHz - 2480MHz
Bluetooth Maximum output power: 7.14dBm
CANON EUROPA N.V.
Bovenkerkerweg 59. 1185 XB Amstelveen. The Netherlands
CANON INC.
30-2. Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501 , Japan
Complies
with
IMDA
Standards
OB00671
Model: 05586111
This device complies with Part 15 of the FCC Rules. Operation is subject
to
the following
two conditions: (1) This device may not cause harmful interference. and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for class
B digital devices. pursuant to Part 15
of
the
FCC
Rules. These limits are designed to
provide reasonable protection against harmful interference
in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However. there is
no
guarantee that interference will not occur
in
a particular installation. If this equipment does cause harmful interference to radio
or television reception. which can
be
determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
or
more
of
the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet
on
a circuit different from that to which the
receiver
is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Do
not make any changes or modifications
to
the equipment unless otherwise specified
in
the manual. If such changes
or
modifications should be made, you could
be
required
to
stop operation
of
the equipment.
CAN ICES-3 (B) / NMB-3 (B)
For CA, USA only
Included
lithium
battery
contains
Perchlorate
Material
-
special
handling
may
apply.
See
www
.
dtsc.ca.gov/hazardouswaste/perchlorate/
for
details.
:;$:~ITEJO){j~ilJ!JlF~lct-~cg
o
{jBifJ!JlFsiP"JI
.:,t;:~ITEJ1J\5-oll:~uic~i3-lct,
ffM,7'.0)~iEB~c:fci:Gt>O)
( ~Jillx~, Kill~~~)
~~~I
;::;,i':H'JO):,x_,
tnt±~1~~f1
~Dt>u<lctclS~t.,
,J:11~..&~fc51.:2t1i~<ic'i!l
,o
ffl!~ci~~*iclct:Q:~1..,
1ic
u*g
o
~!tut.,
1{!f:filEP"Jg1.:-::J~*u
-Clct:::\=-t'
./YHPIC::<'.:261&'2.<ic'i!L,
10