User's Manual

Setting Up
11
English
Use a commercially-available belt or strap to fasten it to a wall or other surface
1 Pass a strong, commercially-available belt or strap through both carrying handles on the rear side.
2 Fasten the tips of the belt or strap to a floor or wall.
Commercially-availablebeltorstrap
Mounting the Main Unit on a Stand or Wall
Thismainunitcanbettedtoastand*ortoawallmountbracket*.Removethestandsbeforehand( 12).
*Commerciallyavailable.
CAUTION
• Forsafety,makesuretoperformthisstepwithatleasttwopeople.
• Makesurethatthemainunitdoesnotfallduringinstallation/removal.
• Avoidtouchingthescreenduringthisstepasitmaydamageit.
• Whenmountingthemainunitonawall,makesurethewallhassufcientstrength.Ifnecessary,applyreinforcement.Also,make
suretochecktheloadcapacityofthestandorwallmountbracket.
• Whenthevideodisplayisplacedonarackordisplaystandandventilationarounditisblockedbyequipmentplacedaboveor
beloworinasurroundingarea,theoperatingtemperaturemayincrease,causingafailureoroverheating.Inordertomaintainthe
operatingtemperatureconditionofthevideodisplay(5˚Cto35˚C),makespaceofatleast1U(4.4cm)aboveandbelowandat
least4cm(1.6in.)spacefromitsback.Makesufcientspacefromperipheralequipment,securevents,orinstallaventilationfan.
• Wheninstallingthevideodisplayonawall,makesufcientspacefromthewallsothatcablesarenotsqueezedortwisted.
1 Attach a commercially available stand or wall mount bracket using the screw holes on the back or side
face of the main unit.
Rear
4-M6
Depth8(Max.)
Unit:mm