User Manual

Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi

Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.

◦ Advanced

For details on each setting item:

Advanced

• Wireless Direct

The following setting information on the Wireless Direct connection is displayed. (Some items are not

displayed depending on printer settings.)

Items Setting

Connection Enable / Disable

Network (SSID)/device name DIRECT-XXXX-PRO-300series

Password XXXXXXXXXX (10 characters)

Communication mode Wireless Direct

Channel 3

Wi-Fi security WPA2-PSK (AES)

No. of printers connected now XX / XX

IPv4 address XXX. XXX. XXX. XXX (12 characters)

IPv4 subnet mask XXX. XXX. XXX. XXX (12 characters)

IPv4 default gateway XXX. XXX. XXX. XXX (12 characters)

IPv6 link-local address XXXX: XXXX: XXXX: XXXX:

XXXX: XXXX: XXXX: XXXX (32 characters)

IPv6 link-local prefix length XXX (up to 3 digits)

MAC address (Wi-Fi) XX:XX:XX:XX:XX:XX (12 characters)

IPsec settings Enable (ESP) / Enable (ESP & AH) / Enable (AH) / Dis-

able

Printer name XXXXXXXXXXXXXXX (up to 15 characters)

Bonjour service name XXXXXXXXXXXXX

XXXXXXXXXXXXX

XXXXXXXXXXXXX (up to 52 characters)

("XX" represents alphanumeric characters.)

To change the setting, select Settings.

◦ Enable/disable Wireless Direct

Select Yes to wirelessly connect without wireless router.

◦ Change SSID/device name

Changes the identifier (SSID/the printer's name displayed on a Wi-Fi Direct compatible device) for

Wireless Direct.