User Manual

Generating Server Certificate (Self-signed Certificate)
When you use SSL connection via IPv6 network, you need to generate an IPv6 server certificate using the
printer.
Generate the server certificate from Remote UI.
Follow the procedure below.
Step1
Checking Printer's IP Address
Step2
Generating Server Certificate
Step3
Checking Generated Server Certificate
Important
• If you generate an IPv6 server certificate, you cannot use SSL communication via IPv4. In addition, a
warning message may appear if you are using Remote UI.
To reset the IPv6 server certificate, operate in the following order from the Remote UI.
Security > SSL/TLS settings > Delete key and certificate > OK
Checking Printer's IP Address
1.
Check that printer is turned on.
Power Supply
2.
Display the HOME screen.
If the HOME screen is not displayed, select the HOME button.
3.
Use the buttons to select LAN settings and press the OK button.
LCD and Operation Panel
4. Use the buttons to select the enabled LAN and press the OK button.
Diagonal lines are displayed for disabled LAN icons.
5. Use the buttons to check the value on IPv6 link-local address.
Write down the value on IPv6 link-local address for your reference when you open Remote UI and
generate a server certificate.
100