Owner's Manual
Table Of Contents
Battery Grip
BG-R10
(I
Instructions
BG-R10 is a battery grip for EOS cameras.
Make sure you read this guide before using the product.
Store this guide safely so that you can use it in the future.
For detailed instructions and precautions, refer to the Advanced Guide (online manual) for
the camera
in
use.
■
Attaching to the Camera
1.
Detach contact covers
(1)
and (2) (Fig. 1-1).
2.
Attach contact cover (1) to (2) to store it (Fig. 1-2).
3.
Remove the battery pack from the camera (Fig.2-1).
4.
Detach the camera's battery compartment cover (Fig.2-2).
5.
Attach the removed battery compartment cover to the battery grip.
• Insert the hinge part
of
the battery compartment cover to the battery grip (Fig. 3-1).
• Press on the battery compartment cover to fix it in place (Fig. 3-2).
•
To
detach the battery compartment cover, slide the battery compartment cover
release lever to unlock it (Fig. 3-3), and then detach the cover by performing the
attaching procedure in reverse.
6.
Insert the battery grip into the camera's battery compartment (Fig.4-1
).
7.
Align the attachment screw with the camera's tripod socket, and then turn the attach/
detach dial to tighten it securely to the camera (Fig. 4-2).
For further instructions on usage, refer to the Advanced Guide (online manual) for the
camera
in
use.
■
Specifications
Power sources: (1) Battery Pack LP-E6NH/LP-E6N/LP-E6
(1
or 2 packs)
(2) DC coupler DR-E6, AC adapter AC-E6N
Dimensions: Approx. 143.2 (W) x 109.4 (H) x 81.0
(D)
mm/5.64 (W) x
4.31
(H) x 3.19 (D)
in.
Weight: Approx.
351
g/12.38 oz. (including battery magazine, excluding batteries)
Working temperature range: 0°C - +40°C / 32°F - +104°F
Working humidity: 85%
or
less
• All the data above is based on Canon's testing standards.
• The product specifications and exterior are subject to change without notice.