User's Manual

Connecting with a Manual Connection
The network settings for the camera access point mode are configured manually. Set
[SSID], [Channel setting], [Encryption settings], and [IP address setting (IPv4)] on each
screen displayed.
1.
Select [Manual connection].
Select [OK] to proceed to the next screen.
2.
Enter the SSID (network name).
Press 〈 〉 to display the virtual keyboard ( ), then enter the SSID.
After entering the SSID, press the 〈 〉 button.
Select [OK] to proceed to the next screen.
3.
Select the desired channel setting.
To specify the settings manually, select [Manual setting], then select
the setting by using 〈 〉.
Select [OK] to establish a connection with the access point.
49