User Manual

145
External Connections
6
Video Output Configuration
6
External Connections
External Connections
Video Ou tput Configur ation
The video signal output from the HD/SD SDI (b only), HDMI OUT
and HD/SD COMPONENT OUT terminals depends on the clip’s video
configuration, the capability of the external monitor (for video output from
the HDMI OUT terminal) and on various menu settings. Video output from
the AV or VIDEO 2 terminal will always be in 480/60i standard.
Video Output Configuration by Terminal
Refer to the following table for the video output configuration from each
terminal. If necessary, you can superimpose the onscreen displays on the
video displayed on the external monitor (0 149).
Operating modes:
V
ideo Output Configuration by Terminal
1
Set [N Video Setup] [SDI Output] to [HD], [SD] or [Off].
2
When you set [M LCD/VF Setup] [HD Output] (under [Zebra]) to [On], you can display zebra patterns on an external monitor. In
such case, output from the HD/SD SDI terminal (b only) and HD/SD COMPONENT OUT terminal will be in HD, regardless of
their setting.
3
Video output will automatically switch to HD or SD, depending on the capability of the external monitor.
4
Set [N Video Setup] [Component Output] to [HD] or [SD].
5
When output from the HDMI OUT terminal is SD (480/60P), the output of the HD/SD SDI terminal will also be 480/60P.
Terminal J
HD/SD SDI
1, 2
(b only)
HDMI OUT
2, 3
HD/SD COMPONENT
OUT
2, 4
AV or
VIDEO 2
Recording frame
size / Frame rate L
HD
output
SD
output
HD
output
SD
output
HD
output
SD
output
SD
output
1080/60i
1080/60i 480/60i
5
1080/60i 480/60P 1080/60i 480/60i 480/60i
1080/30P
1080/24P
1080/slow or
fast motion
720/60P
720/60P 480/60i
5
720/60P 480/60P 720/60P 480/60i 480/60i
720/30P
720/24P
720/slow or
fast motion
COPY