Owner's Manual
Table Of Contents
- Instruction Manual
- Conventions Used in This Manual
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Quick Start Guide
- Getting Started
- Attaching Camera Strap
- Charging the Battery
- Installing / Removing the Battery
- Using the LCD Monitor
- Power On
- Setting Date & Time
- Setting the Language
- Installing and Removing SD Card
- Mounting / Detaching a Lens
- Lens Hood
- Image Stabilizer
- Basic Operation
- Using the Quick Control Screen
- Menu Operations
- Before You Start
- Basic Shooting
- Setting the AF and Drive Modes
- Image Settings
- Image-Recording Quality
- ISO Speed
- Selecting a Picture Style
- Customizing a Picture Style
- Registering a Picture Style
- Setting the White Balance
- White Balance Correction
- Auto Lighting Optimizer
- Lens Peripheral Illumination Correction
- Creating and Selecting a Folder
- File Numbering Methods
- Setting Copyright Information
- Setting the Color Space
- Advanced Operations
- Using a Flash
- Shooting with the LCD Monitor
- Shooting Movies
- Image Playback
- Image Playback
- Shooting Information Display
- Searching for Images Quickly
- Magnified View
- Rotating the Image
- Setting Ratings
- Quick Control During Playback
- Enjoying Movies
- Playing Movies
- Editing the Movie’s First and Last Scenes
- Slide Show
- Viewing the Images on a TV
- Protecting Images
- Erasing Images
- Changing Image Playback Settings
- Post-Processing Images
- Sensor Cleaning
- Printing Images
- Customizing the Camera
- Optional Accessories
- Chart of Available Functions per Mode
- Menu Settings
- Troubleshooting
- Error Codes
- System Accessory Map
- Specs
- Index
- Software Start Guide
- Pocket Guide
- Correction to Instruction Manual
- Scans of Supplied CD-ROMs
- Great Photography IS Easy
- Do More with Macro
- Camera Warranty Information
55
1 Fully Automatic Shooting
The focus confirmation light
<
o
>
blinks and focus is not achieved.
Aim the AF point over an area having good contrast, then press the
shutter button halfway (p.80). If you are too close to the subject, move
away and try again.
Sometimes multiple AF points flash simultaneously.
This indicates that focus has been achieved at all those AF points. As long as
the AF point covering the desired subject flashes, you can take the picture.
The beeper continues to beep softly. (The focus confirmation
light <o> does not light.)
It indicates that the camera is focusing continuously on a moving subject.
(The focus confirmation light <o> does not light.) You can shoot a
moving subject in focus.
Pressing the shutter button halfway does not focus the subject.
If the focus mode switch on the lens is set to <MF> (Manual Focus), set it
to <AF> (Auto Focus).
Although it is daylight, the flash popped up.
For a backlit subject, the flash may pop up to help lighten the subject’s
dark areas.
In low light, the built-in flash fired a series of flashes.
Pressing the shutter button halfway may trigger the built-in flash to fire a
series of flashes to assist autofocusing. This is called the AF-assist
beam. It is effective up to approx. 4 meters/13.1 feet away.
Although flash was used, the picture came out dark.
The subject was too far away. The subject should be within 5 meters/16.4
feet from the camera.
When flash was used, the bottom part of the picture came out
unnaturally dark.
The subject was too close to he camera, and a shadow was created by the lens
barrel. The subject should be at least 1 meter/3.3 feet away from he camera. If a
hood has been attached to the lens, remove it before taking the flash picture.
FAQ