User Manual

15
Quick Start Guide
6
Set the Mode Dial to <1> (Full
Auto).
(p.46)
All the necessary camera settings will
be set automatically.
7
Focus the subject. (p.37)
Look through the viewfinder and aim the
viewfinder center over the subject.
Press the shutter button halfway, and
the camera will focus the subject.
If necessary, the built-in flash will pop-
up automatically.
8
Take the picture. (p.37)
Press the shutter button completely to
take the picture.
9
Review the picture. (p.138)
The captured image will be displayed
for approx. 2 sec. on the LCD monitor.
To display the image again, press the
<x> button (p.58).
The shooting settings displayed on the LCD monitor will turn off
when your eye nears the viewfinder eyepiece.
To shoot while looking at the LCD monitor, see page 107.
To delete an image, see “Erasing Images” (p.171).
COPY