Quick Start Guide

4
Setting Up the Printer
9
Close the top cover.
10
Press the OK button.
•
The ON lamp ashes and the ink system preparation
starts. It takes about 5 minutes to complete.
Flashing
Proceed to the next page.
Count the number of ashes.
•
9 times
Protective material remaining.
"2. Removing Packing Materials" on page 1
•
4 times
Print heads are not installed correctly.
"3. Installing the Print Heads" on page 1
•
5 times
Print heads cannot be recognized.
"3. Installing the Print Heads" on page 1
•
The ON lamp and Alarm lamp flash alternately 8
times
Ink system preparation was not completed successfully.
Press the ON button to restart the printer, and then see "5.
Pouring Ink" on page 3.
For all other cases, refer to the Online Manual.
If the Alarm lamp flashes or lights