User Guide

3-2-2 Select Protocol
① Select [UDP] or [RTP] or [RTP+FEC] or [RTSP+RTP]
② ⇒ Press SET
(The [UDP] protocol will be selected for this example).
[UDP]: This protocol prioritizes transfer speeds but does not guarantee the reliability/integrity of the data.
Lost or delayed IP packets are ignored.
[RTP]: Standard protocol for video/audio broadcasts over the internet. Lost or delayed IP packets are
ignored.
[RTP+FEC]: This setting uses the RTP protocol and adds a layer of FEC error correction so the receiving side*
can recover lost or delayed IP packets. This combination is more common for broadcasts over Wi-
Fi networks.
[RTSP+RTP]: This setting uses the RTSP (reel time streaming) protocol to control the streaming server 9camera) in
real time and the RTP protocol for the broadcast over IP. With the RSTP protocol, the receiver can
control when to start and stop the broadcast.
*A decoder or PC software that supports FEC control is required.
3-2-3 Input Destination Server and Destination Port Number
① Select [Destination Server] ⇒ Press SELECT