Owner's Manual
Table Of Contents
- Instructions
- Camera Firmware
- Conventions used in these instructions
- Safety Precautions
- General Precautions
- Nomenclature
- Attaching and Detaching the Lens
- Setting the Focus Mode
- Setting the Focusing Distance Range
- Control Ring
- SA Control Ring
- Image Stabilizer
- Hand-held Close-up (Macro) Shooting
- Exposure When Taking Close-up (Macro) Shots
- Hood
- Tripod Mount (Sold separately)
- Filters (Sold separately)
- Macro Flash (Sold separately)
- Specifications
ENG-16
This lens can be used with the tripod mount ring E (B) with adapter for the RF100mm F2.8 L MACRO
IS USM lens, sold separately. Attach the lens to the tripod mount adapter before attaching the tripod
mount.
10.
Tripod Mount (Sold separately)
Attaching the Tripod Mount Adapter
①
③
②
Mounting lugs
Mounting index
While spreading the tripod mount adapter
opening (①), match the mounting index on the
adapter with the SA control ring index on the lens
(②), and slide the adapter along from the lens
mount side (③).
z
The tripod mount adapter’s inner lugs should
slide into the grooves on the lens barrel. The
adapter should not be able to rotate around
the lens barrel.
Removing the Tripod Mount Adapter
①
③
② ②
Grip both sides of the tripod mount adapter
opening with the fingers of both hands (①),
spread it open (②) with a slight downward motion
toward the front of the lens, and then slide it
upwards over the lens mount to remove it (③).
z
If a white powder-like substance is apparent on
the surface of the lens after the tripod mount
adapter has been removed, wipe it clean with
a cloth or similar item.
z
When attaching or removing the the tripod mount adapter, ensure that the lens cap and dust cap are both
on and set the lens so that the lens mount side faces up.