Owner's Manual
Table Of Contents
- Instructions
- Camera Firmware
- Conventions used in these instructions
- Safety Precautions
- General Precautions
- Nomenclature
- Attaching and Detaching the Lens
- Setting the Focus Mode
- Setting the Focusing Distance Range
- Control Ring
- SA Control Ring
- Image Stabilizer
- Hand-held Close-up (Macro) Shooting
- Exposure When Taking Close-up (Macro) Shots
- Hood
- Tripod Mount (Sold separately)
- Filters (Sold separately)
- Macro Flash (Sold separately)
- Specifications
ENG-18
11.
Filters (Sold separately)
Tripod Mount (Sold separately)
You can attach filters to the filter mounting thread
on the front of the lens.
z
Filters and the Canon macro flash cannot be
used on this lens at the same time.
z
If you need a polarizing filter, use the Canon
Circular Polarizing Filter PL-C B.
z
Detach the hood when adjusting the polarizing
filter.
z
When photographing from a tripod attached
to the tripod mount, using [Elec. 1st-curtain]
or [Electronic] settings is recommended* with
cameras with interchangeable shutter mode
settings.
* When using an EOS R camera, select either
[Mode 1] (default factory setting) or [Mode 2] in
the [Silent LV shoot.] settings, or select [Enable]
in the [Silent shutter] settings.
z
When carrying the lens with the tripod mount
attached, ensure that the
tripod mount lock
knob is securely tightened, and take care when
carrying. Not doing so may result in the product
falling off, leading to damage or injury.