Specification Sheet

6
Manual Flash Details
ALL Flash output setting: 1/128 to 1/1
A+B Flash output setting: 1/128 to 1/1
A+B+C Flash output setting: 1/128 to 1/1
Stroboscopic Flash Details
Number of Flashes 1-40
Flash frequency 1-199 Hz
ALL Flash output setting: 1/128 to 1/4
A+B Flash output setting: 1/128 to 1/4
A+B+C Flash output setting: 1/128 to 1/4
Individual Receiver Details
Manual ash Flash output setting: 1/8192 to 1/1
Stroboscopic
ash
• Flash output setting: 1/8192 to 1/4
• Flash count: 1-100
• Flash frequency: 1-199 Hz
* All settings are congured on the receiver.
Test Flash Available (Sender/Receiver)
Modeling Flash Available (Sender/Receiver)
Modeling Lamp Available (Sender only)
Linked Shooting via Radio Transmission
Linked Functions
Supports linked shooting with automatic shutter release of up to 16 cameras (sender:1,
receivers:15) linked to shutter release on the sender camera.
*Shooting is not simultaneous, because receiver cameras shoot slightly after the sender camera shutter
release timing.
Information Display
Type Reective memory LCD (normally black)
Size Approx. 1.89(H) x 1.04(V) in.
Display Format Dot-matrix display
Dot Count Approx. 56,000 dots (320x176)
General
Power Source
Battery Pack LP-EL
* AA/LR6 Alkaline Batteries and Ni-MH batteries cannot be used.
Battery Charger
Battery Charger LC-E6 /LC-E6E
Car Battery Charger CBC-E6
External Power Source
Supported
* Optional - Supports CP-E4N Battery Pack
PC Terminal Supported
Modeling Lamp
Illumination Time
Approx. 3 hr 20 min. Continously
* With P.Fn-09 set to [2], and using a fully charged Battery Pack LP-EL
Dust-and-Water Resistance
Supported
* Water-resistant performance to EOS-1D series
Dimensions (W x H x D) Approx. 3.32" x 5.87" x 5.37"
Weight (Approx.)
20.18 oz (Body Only)
24.23 oz (Body and Battery
Manual Flash Details
ALL Flash output setting: 1/128 to 1/1
A+B Flash output setting: 1/128 to 1/1
A+B+C Flash output setting: 1/128 to 1/1
Stroboscopic Flash Details
Number of Flashes 1-40
Flash frequency 1-199 Hz
ALL Flash output setting: 1/128 to 1/4
A+B Flash output setting: 1/128 to 1/4
A+B+C Flash output setting: 1/128 to 1/4
Individual Receiver Details
Manual ash Flash output setting: 1/8192 to 1/1
Stroboscopic
ash
• Flash output setting: 1/8192 to 1/4
• Flash count: 1-100
• Flash frequency: 1-199 Hz
* All settings are congured on the receiver.
Test Flash Available (Sender/Receiver)
Modeling Flash Available (Sender/Receiver)
Modeling Lamp Available (Sender only)
Linked Shooting via Radio Transmission
Linked Functions
Supports linked shooting with automatic shutter release of up to 16 cameras (sender:1,
receivers:15) linked to shutter release on the sender camera.
*Shooting is not simultaneous, because receiver cameras shoot slightly after the sender camera shutter
release timing.
Information Display
Type Reective memory LCD (normally black)
Size Approx. 1.89(H) x 1.04(V) in.
Display Format Dot-matrix display
Dot Count Approx. 56,000 dots (320x176)
General
Power Source
Battery Pack LP-EL
* AA/LR6 Alkaline Batteries and Ni-MH batteries cannot be used.
Battery Charger
Battery Charger LC-E6 /LC-E6E
Car Battery Charger CBC-E6
External Power Source
Supported
* Optional - Supports CP-E4N Battery Pack
PC Terminal Supported
Modeling Lamp
Illumination Time
Approx. 3 hr 20 min. Continously
* With P.Fn-09 set to [2], and using a fully charged Battery Pack LP-EL
Dust-and-Water Resistance
Supported
* Water-resistant performance to EOS-1D series
Dimensions (W x H x D) Approx. 3.32" x 5.87" x 5.37"
Weight (Approx.)
20.18 oz (Body Only)
24.23 oz (Body and Battery