Manual

Software Setup 95
Chapter 3
The [Setting] button allows setting a delay time from when a document is
loaded until scanning starts.
Set a delay time when you need to adjust the document guides or align the
pages after loading a document with automatic feeding.
When [Panel Feeding] is selected as the [Feeding Option], scanning does not
start until you press the Start button.
After loading different-size documents, adjust the document guides or sort the
pages before pressing the Start button to start scanning.
• To create separate files for each batch of documents during
continuous scanning (ISIS driver only.)
Set the [Feeding Option] on the [Basic] tab sheet to either [Automatic Feeding]
or [Panel Feeding], and set [Batch Separation] to [Auto]. Each batch of
documents is saved with different file names. (See “Batch Separation (ISIS
driver only),” on p. 83.)
• To scan a batch of documents one page at a time
Set the [Feeding Option] to either [Automatic Feeding] or [Panel Feeding], and
scan each page. After scanning each page, the scanner returns to the waiting
state.
When [Automatic Feeding] is selected as the [Feeding Option], the scanner
detects documents and starts scanning as they are loaded.
When [Panel Feeding] is selected as the [Feeding Option], press the Start
button to scan after loading each page.
• To stop the scanner when pages double feed
Confirm that the [Double Feed Detection] method selected on the [Others] tab
sheet suits the document being scanned. (See “Double Feed Detection,” on
p. 82.)