Owner's Manual
Table Of Contents
- Instructions
- Features
- Parts & Controls
- Mounting / Detaching the Lens
- Setting the Focus Mode
- Switching the Focusing Distance Range
- Hood (Not Supplied)
- Taking Pictures
- Exposure
- Infinity Compensation Mark
- Using the Tripod Mount (Not Supplied)
- Using Filters (Not Supplied)
- Extension Tunbes (Not Supplied)
- Close-Up Lenses ((Not Supplied)
- Macro Flash (Not Supplied)
- Specs
- Warranty
1.
Mounting and
Detaching the Lens
-~-----'
See your camera's instructions for details on
mounting and detaching the lens.
• After detaching the lens, place the lens with the
rear end
up
to
prevent the lens surface and
electrical contacts from getting scratched.
• If the contacts get soiled, scratched, or have
fingerprints
on
them, corrosion or faulty
connections can result. The camera and lens
may not operate properly.
• If the contacts get soiled or have fingerprints
on
them, clean them with a soft cloth.
• If you remove the lens, cover it with the dust
cap.
To
attach it properly, align the lens mount
index and the
0 index of the dust cap as shown
in
the diagram, and turn clockwise.
To
remove
it,
reverse the order.
ENG-4
2.
Setting the Focus
Mode
To
shoot in autofocus (AF) mode, set
the
focus
mode
switch to
AF.
To
use only manual focusing (MF), set the focus
mode
switch to
MF,
and
focus by turning the
focusing ring.
The
focusing ring always works,
regardless
of
the focus mode.
IlJ
After autofocusing in ONE SHOT AF mode, focus
manually by pressing the shutter button halfway
and turning the focusing ring. (Full-time manual
focus)