Owner's Manual
Table Of Contents
- Instructions
- Features
- Parts & Controls
- Mounting / Detaching the Lens
- Setting the Focus Mode
- Switching the Focusing Distance Range
- Hood (Not Supplied)
- Taking Pictures
- Exposure
- Infinity Compensation Mark
- Using the Tripod Mount (Not Supplied)
- Using Filters (Not Supplied)
- Extension Tunbes (Not Supplied)
- Close-Up Lenses ((Not Supplied)
- Macro Flash (Not Supplied)
- Specs
- Warranty
3.
Switching
the
Focusing
Distance
Range
You
can set the focusing distance range to
0.31
m/1.0
ft.
to infinity
or
0.48 m/1.6
ft.
to infinity.
By setting the suitable focusing distance range,
the actual autofocusing time can be shorter.
U If you autofocus outside the set focusing distance
range, the lens may stop focusing at the start of
the focusing range; however, this
is
not a
malfunction. Press the shutter release button
halfway again.
4. Hood (Sold Separately)
The ET-67 hood can keep unwanted light out of
the lens, and also protects the front of the lens
from rain, snow, and dust.
Attach and align the hood to the hood mount
on
the front of the lens, and turn the hood as shown
by the arrow to secure
it.
The hood can be reverse-mounted on the lens
for storage.
o ·Part of the picture may be blocked if the hood
is
not attached properly.
• When attaching or detaching the hood, grasp the
base of the hood to turn
it.
To
prevent deformation,
do not grasp the
rim
of the hood to turn
it.
• Remove the hood when using the macro flash.
ENG-S