Safety data sheet

MATERIAL SAFETY DATA SHEET
Page 4 of 8
4706A
IC3152-0101MSDS #:
Product Code:
Use with adequate ventilation.
Avoid contact with skin, eyes and clothing.
In case of contact, wash out the contaminated area immediately.
Precautions for Safe Handling:
Keep in a cool and dry place. Protect from sunlight.
Keep away from heat and flame.
Keep out of the reach of children.
Conditions for Safe Storage, Including Any Incompatibilities:
Control Parameters:
No special ventilation equipment is needed under intended use of this product.
Engineering Controls:
Required
Not Required
Respiratory Protection:
Required
Not Required
Eye/Face Protection:
Required
Not Required
SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Skin Protection:
Individual Protection Measures:
Ink for Ink Jet Printer.
For more information, please refer to the instruction of this product.
Specific End Uses:
SECTION 7 HANDLING AND STORAGE
USA
OSHA PEL
ACGIH TLV EU OEL DFG MAK
Product (Ink) Not established Not establishedNot established Not established
Glycerin mist:
TWA 15 mg/m
3
(Total dust)
TWA 5 mg/m
3
(Respirable fraction)
Not established
Not established
TWA 400 ppm,
980 mg/m
3
Glycerin mist:
TWA 10 mg/m
3
aerosol:
Ceiling 100 mg/m
3
Not established
TWA 200 ppm,
492 mg/m
3
STEL 400 ppm,
984 mg/m
3
Not established
TWA 20 ppm,
52 mg/m
3
STEL 40 ppm,
104 mg/m
3
Not established
Not established
Not established
10 ppm, 26 mg/m
3
10 ppm, 44 mg/m
3
200 ppm, 500 mg/m
3
Glycerin
Ethylene glycol
Diethylene glycol
Isopropyl alcohol
Exposure Controls:
September 22, 2011
Revision Date:December 22, 2000Date of Issue: