Advanced User Guide E CT2-D101-A © CANON INC.
Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Instruction Manuals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Quick Start Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 About This Guide. . . . . . . . . . . . . . . . . . . .
Sports Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Panning Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Close-up Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Food Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Night Portrait Mode. . . . . . . . . . . . . . . . . . .
Image Quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Still Image Aspect Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 Exposure Compensation/AEB Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 ISO Speed Settings for Still Photos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 Auto Lighting Optimizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Movie Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298 Movie Recording Quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306 Sound Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 313 Video Snapshots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316 Time-Lapse Movies. . . . . . . . . . . . . . . . . . . . . . . . . . .
Creative Filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426 Red-Eye Correction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429 Resizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431 Cropping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433 Album Creation. . . . . . . . . . . . . . . . . .
Responding to Error Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 580 Wireless Communication Function Precautions. . . . . . . . . . . . . . . . . . . . . . . 590 Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 592 Checking Network Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 593 Wireless Communication Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 655 Importing Images to a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 656 Household Power Outlet Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 658 Troubleshooting Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 660 Error Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction Before starting to shoot, be sure to read the following To avoid shooting problems and accidents, first read the Safety Instructions and Handling Precautions. Also read this Advanced User Guide carefully to ensure that you use the camera correctly. Take some test shots, and understand about product liability After shooting, play images back and check whether they have been properly recorded.
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your dealer. Camera (with body cap (Camera Cover R-F-4)) Battery Pack LP-E12 (with protective cover) Battery Charger LC-E12/LC-E12E* Strap * Battery Charger LC-E12 or LC-E12E is provided. (The LC-E12E comes with a power cord.) The camera does not come with a memory card ( ), interface cable, or HDMI cable. If you purchased a Lens Kit, check that the lenses are included.
Instruction Manuals The Instruction Manual included with the camera provides basic instructions for the camera and Wi-Fi functions. Advanced User Guide Complete instructions are provided in this Advanced User Guide. For the latest Advanced User Guide, refer to the following website. https://cam.start.canon/C007/ Lens/Software Instruction Manual Download from the following website. https://cam.start.canon/ Note Select [ : Manual/software URL] to display the QR code on the camera screen.
Quick Start Guide 1. Insert the battery ( ). Upon purchase, charge the battery to start using ( 2. Insert the card ( ). ). Insert the card with the label facing the front of the camera until it clicks into place.
3. Attach the lens ( ). Align the lens mount indexes (white) on the lens and camera to attach the lens. 4. Prepare to shoot ( ). Press (1) as you turn (2) slightly, then release (1). Turn (2) a little more until it clicks. 5. Set the power switch to < < >( , >, then set the Mode dial to ). All the necessary camera settings will be set automatically.
6. Flip out the screen ( ). If the [Date/Time/Zone] setting screen is displayed, see Date/Time/ Zone. 7. Focus on the subject ( ). Center the subject on the screen. Press the shutter button halfway, and the camera will focus on the subject. If < > blinks on the screen, manually raise the built-in flash. 8. Take the picture ( ). Press the shutter button completely to take the picture.
9. Review the picture. The image just captured will be displayed for approx. 2 sec. on the screen ( ). To display the image again, press the < > button ( ).
About This Guide Icons in This Guide Basic Assumptions for Operational Instructions and Sample Photos Icons in This Guide Indicates the dial. > < < >< > < >< > < > * Indicates the direction to press the cross keys. Indicates the Quick Control/Set button. Indicates the duration (in * seconds) of the operation for the button you pressed, as timed after you release the button.
Basic Assumptions for Operational Instructions and Sample Photos Before following any instructions, make sure the power switch is set to < > ( ). It is assumed that all the menu settings and Custom Functions are set to their defaults. Screen shots in this guide show the default menu settings for NTSC regions (North America, Japan, South Korea, Mexico, etc.) as an example. Default menu settings for Europe, Russia, China, Australia, etc. will be for PAL.
Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera ( ). SD/SDHC/SDXC memory cards UHS-I cards supported. Cards That Can Record Movies When recording movies, use a high-capacity card with ample performance (fast enough writing and reading speeds) for the movie recording size. For details, see Cards That Can Record Movies.
Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING: Denotes the risk of serious injury or death. Keep the product out of the reach of young children. Keep batteries out of the reach of children. A strap wrapped around a person’s neck may result in strangulation. The parts or provided items of cameras or accessories are dangerous if swallowed.
Observe the following instructions when using a battery charger. • Periodically remove any dust buildup from the power plug and power outlet using a dry cloth. • Do not plug in or unplug the product with wet hands. • Do not use the product if the power plug is not fully inserted into the power outlet. • Do not expose the power plug and terminals to dirt or let them come into contact with metallic pins or other metal objects.
CAUTIONS: Follow the cautions below. Otherwise physical injury or property damage may result. Do not fire the flash near the eyes. It may hurt the eyes. Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness. In such a case, stop using the product immediately and rest for a while before resuming use. Flash emits high temperatures when fired.
Handling Precautions Camera care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If the camera gets wet, contact a Canon Service Center immediately. Wipe off any water droplets with a dry and clean cloth. If the camera has been exposed to salty air, wipe it with a clean, well-wrung wet cloth. Never leave the camera near anything having a strong magnetic field such as a magnet or electric motor.
Screen Although the screen is manufactured with very high precision technology with over 99.99% effective pixels, 0.01% or fewer of the pixels may be dead, and there may also be spots of black, red, or other colors. This is not a malfunction. They do not affect the images recorded. If the screen is left on for a prolonged period, screen burn-in may occur where you see remnants of what was displayed. However, this is only temporary and will disappear when the camera is left unused for a few days.
Part Names 24
(1) Shutter button (2) < (3) EF-M lens mount index (4) Image sensor (5) Grip (6) Contacts (7) Lens mount (8) Movie shooting button (9) Power switch (10) Mode dial > Dial (11) < (12) Built-in flash > Multi-function button (13) Microphone (14) < (15) Strap mount (16) AF-assist beam/Red-eye reduction/Self-timer/Remote control lamp (17) Terminal cover (18) Lens release button (19) Lens lock pin > Focal plane mark (20) < (21) Dioptric adjustment knob > External microp
(1) Screen (2) Viewfinder (3) Hot shoe (4) Flash sync contacts (5) Access lamp (6) Strap mount (7) < > Wi-Fi button (8) < > Quick Control/Set button / (9) < (10) < > Playback button > Left/Autofocus/Manual focus button (11) < > AE lock/< (12) < > AF point selection/< (13) < > Magnify button > Index button > Info button (14) < / (15) < / > Right/Flash button > Up/Exposure compensation button (16) < / (17) < > Menu button (18) < > Digital terminal (19) < > D
Mode dial Features on the Mode dial are grouped into Basic Zone, Creative Zone, and movie recording modes. (1) Basic Zone All you do is press the shutter button. The camera sets everything to suit the subject or scene for shooting.
(2) Creative Zone These modes give you more control for shooting various subjects as desired. Program AE (P) Shutter priority AE (Tv) Aperture priority AE (Av) Manual exposure (M) (3) Movie recording For a variety of movie recording ( ).
Battery Charger LC-E12 Charger for Battery Pack LP-E12 ( (1) Power plug (2) Charge lamp (3) Full-charge lamp (4) Battery pack slot ). Battery Charger LC-E12E Charger for Battery Pack LP-E12 ( (1) Power cord socket (2) Charge lamp (3) Full-charge lamp (4) Battery pack slot (5) Power cord ).
Attaching the Strap Pass the end of the strap through the strap mount from the bottom, then pass it through the strap buckle as shown. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.
Software Software Overview Downloading and Installing EOS Software or Other Dedicated Software Downloading the Software Instruction Manual Software Overview This section summarizes software used with EOS cameras. Note that downloading and installing the software requires an internet connection. The software cannot be downloaded or installed in environments without an internet connection.
Downloading and Installing EOS Software or Other Dedicated Software Always install the latest version of the software. Update any previous versions that are installed by overwriting them with the latest version. Caution Do not connect the camera to a computer before you install the software. The software will not be installed correctly. The software cannot be installed unless the computer is connected to the internet. Previous versions cannot display images from this camera correctly.
1. Download the software. Connect to the internet from a computer and access the following Canon website. https://cam.start.canon/ Enter the serial number on the bottom of the camera, then download the software. Decompress it on the computer. For Windows Click the displayed installer file to start the installer. For macOS A dmg file will be created and displayed. Follow the steps below to startup the installer. 1.Double-click the dmg file. • A drive icon and installer file will appear on the desktop.
Downloading the Software Instruction Manual Software Instruction Manuals (PDF files) can be downloaded from the Canon website to your computer. Software Instruction Manual download site https://cam.start.
Preparation and Basic Operations This chapter describes preparatory steps before you start shooting and the basic camera operations.
Charging the Battery 1. Detach the protective cover provided with the battery. 2. Fully insert the battery into the charger. Do the opposite to remove the battery.
3. Charge the battery. LC-E12 Flip out the charger prongs as shown and plug the charger into a power outlet. LC-E12E Connect the power cord to the charger and insert the plug into a power outlet. Charging starts automatically and the charge lamp (1) lights up in orange. When the battery is fully charged, the full-charge lamp (2) will light up in green. Charging a depleted battery takes approx. 2 hr. at room temperature (23°C/73°F).
Upon purchase, the battery is not fully charged. Charge the battery before use. Charge the battery on the day before or on the day it is to be used. Charged batteries gradually lose their charge, even when they are not used. After charging the battery, remove it and disconnect the charger from the power outlet. When not using the camera, remove the battery.
Inserting/Removing the Battery and Card Insertion Formatting the Card Removal Insert a fully charged Battery Pack LP-E12 and card in the camera. The captured images are recorded onto the card. Insertion 1. Slide the card/battery compartment cover open. 2. Insert the battery. Insert the end with the electrical contacts. Insert the battery until it locks in place.
3. Insert the card. Insert the card with the label facing the front of the camera until it clicks into place. Caution Make sure the card’s write-protect switch (1) is set upward to enable writing and erasing. 4. Close the cover. Slide the cover until it clicks shut. Caution You cannot use batteries other than the Battery Pack LP-E12.
Formatting the Card If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera ( ).
Removal 1. Slide the card/battery compartment cover open. Set the power switch to < >. Make sure the access lamp (1) is off before opening the card/battery compartment cover. If [Saving...] is displayed on the screen, close the cover. 2. Removing the battery. Press the battery lock lever as shown by the arrow and remove the battery. To prevent short-circuits, always attach the included protective cover ( ) to the battery.
3. Remove the card. Gently push in the card, then let it go to eject. Pull the card straight out, then close the cover. Note The number of available shots varies depending on the remaining capacity of the card, the settings of image quality, ISO speed, etc.
Caution When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card/battery compartment cover. To avoid corrupting image data or damaging cards or the camera, never do any of the following while the access lamp is lit or blinking. • Removing the card. • Removing the battery. • Shaking or striking the camera.
Using the Screen You can change the direction and angle of the screen. 1. Flip out the screen. 2. Rotate the screen. When the screen is out, you can tilt it up or down or rotate it to face the subject. Indicated angles are only approximate. 3. Face it toward you. Normally, use the camera with the screen facing you. Caution Avoid forcing the screen into position as you rotate it, which puts undue pressure on the hinge.
Note Keep the screen closed and facing the camera body when the camera is not in use. You can protect the screen.
Turning on the Power Setting the Date, Time, and Time Zone Changing the Interface Language Automatic Sensor Cleaning Battery Level Indicator < > The camera turns on. You can now shoot still photos and record movies. < > The camera is turned off and does not function. Set the power switch to this position when not using the camera.
Setting the Date, Time, and Time Zone If the [Date/Time/Zone] setting screen is displayed after you turn on the camera, see Date/ Time/Zone to set the date, time, and time zone. Changing the Interface Language To change the interface language, see Language. Automatic Sensor Cleaning Whenever the power switch is set to < > or < >, the sensor is cleaned automatically (which may make a faint sound). During the sensor cleaning, the screen will display [ ].
Battery Level Indicator When the power switch is set to < >, the battery level will be indicated. Battery level is sufficient. Battery level is low, but the camera can still be used. Battery will be exhausted soon (blinks). Charge the battery. Caution Doing any of the following will exhaust the battery faster: • Pressing the shutter button halfway for a prolonged period. • Activating the AF frequently without taking a picture. • Using the lens’s Image Stabilizer.
Attaching/Detaching Lenses Attaching a Lens Detaching a Lens All EF-M lenses can be used. Attaching a Lens 1. Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows.
2. Attach the lens. Align the white mount index on the lens with the mount index on the camera and turn the lens as shown until it clicks into place. 3. Prepare to shoot. Press (1) as you turn (2) slightly, then release (1). Turn (2) a little more until it clicks. 4. Remove the front lens cap.
Detaching a Lens 1. While pressing the lens release button, turn the lens as shown by the arrow. Turn the lens until it stops, then detach it. Attach lens caps to the lens you removed. Caution Do not look at the sun directly through any lens. Doing so may cause loss of vision. When attaching or detaching a lens, set the camera’s power switch to < >. If the front part (focusing ring) of the lens rotates during autofocusing, do not touch the rotating part.
Tips for avoiding smudges and dust When changing lenses, do it quickly in a place with minimal dust. When storing the camera without a lens attached, be sure to attach the body cap to the camera. Remove smudges and dust on the body cap before attaching it.
Attaching/Detaching EF/EF-S Lenses Attaching a Lens Detaching a Lens EF and EF-S lenses can be attached by using an optional Mount Adapter EF-EOS M. Attaching a Lens 1. Remove the caps. Remove the caps on the lens, adapter, and body.
2. Attach the lens to the adapter. (1) Red index (2) White index Align the red or white mount index on the lens with the corresponding mount index on the adapter and turn the lens as shown by the arrow until it clicks into place. 3. Attach the adapter to the camera. Align the white mount indexes (3) on the adapter and camera and turn the lens as shown until it clicks into place.
4. 5. Set the lens’s focus mode switch to < >. < > stands for autofocus. < > stands for manual focus. Autofocus will not operate. Remove the front lens cap.
Detaching a Lens 1. While pressing the lens release button, turn the adapter as shown by the arrow. Turn the lens until it stops, then detach it. 2. Detach the lens from the adapter. Hold down the lens release lever on the adapter and turn the lens counterclockwise. Turn the lens until it stops, then detach it. Attach lens caps to the lens you removed. Caution For lens precautions, see Detaching a Lens. With lenses heavier than the camera, hold the camera by the lens when you shoot or carry it.
Basic Operations Adjusting the Viewfinder (Dioptric Adjustment) Holding the Camera Shutter Button Dial < > Info Button Multi-Function Button Adjusting the Viewfinder (Dioptric Adjustment) 1. Switch the display mode. To use the viewfinder, activate it by holding it near your eye. 2. Adjust the diopter. Adjust it with the screen open. Slide the dioptric adjustment slider left or right to obtain the sharpest image in the viewfinder.
Holding the Camera To obtain sharp images, hold the camera still to minimize camera shake. (1) Horizontal shooting (2) Vertical shooting 1. 2. 3. 4. 5. 6. With your right hand, hold the camera firmly by the camera grip. With your left hand, support the lens from below. Rest your right index finger lightly on the shutter button. Rest your arms and elbows lightly against the front of your body. To maintain a stable stance, place one foot slightly ahead of the other.
Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture value. The exposure value (shutter speed and aperture value) is displayed on the screen for 8 sec. ( ). Pressing completely This releases the shutter and takes the picture.
Note The camera will still pause before taking a picture if you press the shutter button completely without pressing it halfway first, or if you press the shutter button halfway and immediately press it completely. Even during menu display or image playback, you can return to shooting standby by pressing the shutter button halfway.
Dial Watch the screen as you turn the < > dial. Use this dial to set the shutter speed, aperture value, etc.
< > Info Button Each press of the < > button changes the information shown. The following examples are still photo shooting screens in < > mode. In (3), an electronic level or histogram is displayed, for example.
Multi-Function Button By pressing the < speed ( ).
Setting the Screen Display Level Menu Display Shooting Mode Guide Feature Guide You can set how information is displayed on the screen according to your preference. Change the settings as necessary. 1. Display the main tabs. Press the < > button to display the menu screen.
2. Select the [ ] tab. Turn the < > dial or press the < tab, then press < >. >< > keys to select the [ Menu Display You can choose from [Standard] or [Guided] as the type of menu display. When set to > button. [Guided], the camera displays main tab descriptions after you press the < When set to [Standard], the camera only displays the menu screen after you press the < > button. The default setting is [Guided]. 1. Select [ : Menu display].
2. Select the display type. (1) Main tabs Note The [ ] tab (My Menu tab) is not displayed when [Guided] is set. For access to My Menu ( ), change the menu display level to [Standard].
Shooting Mode Guide A brief description of the shooting mode can be displayed when you switch shooting modes. The default setting is [Enable]. 1. Select [ 2. Select [Enable]. 3. Turn the Mode dial. : Mode guide]. A description of the selected shooting mode will appear.
4. Press the < > key. The rest of the description will appear. To clear the mode guide, press < >. In < >/< > mode, you can display the shooting mode selection screen.
Feature Guide A brief description of functions and items can be displayed when you use Quick Control or menu settings. The default setting is [Enable]. 1. Select [ 2. Select [Enable]. : Feature guide].
Sample screens Quick Control screen Menu Screen (1) Feature guide Note To clear a description, either tap it or continue performing operations.
Menu Operations and Settings Menu Screen Menu Setting Procedure Dimmed Menu Items (1) Screen (2) < (3) < (4) < > button (5) < > Dial > button > button 73
Menu Screen The menu tabs and items displayed vary depending on the shooting mode.
Menu Setting Procedure When set to [ 1. : Menu display: Guided] Display the main tabs. When you press the < > button, the main tabs (1) and a description of the selected tab will appear. 2. Select a main tab. Turn the < > dial to switch between main tabs. You can also switch main tabs by pressing the < 3. > button. Display the menu screen. Press < > to display the menu screen. To return to the main tab screen, press the < 75 > button.
4. Select a secondary tab. Use the < >< secondary tab. 5. > dial to select a Select an item. Use the < 6. > keys or turn the < >< > keys to select an item, then press < >. Select an option. Use the < >< > or < >< options are selected with the < < >< > keys.) > keys to select an option. (Some >< > keys and others with the The current setting is indicated in blue.
7. Set an option. Press < > to set it. If you change the setting from the default, it will be indicated in blue (available only for the menu items under the [ ] tab). 8. Exit the setting. Press the < > button twice to exit the menu and return to shooting standby. Note The description of menu functions hereafter assumes that the menu screen is displayed. In steps 2–8, you can also tap the screen to perform operations ( ). To cancel the operation, press the < > button.
When set to [ 1. : Menu display: Standard] Display the menu screen. Press the < 2. > button to display the menu screen. Select a tab. Press the < Use the < >< secondary tab. > button to switch between main tabs (1). > keys or turn the < > dial to select a After this, operations are the same as when set to [ : Menu display: Guided] See When set to [ : Menu display: Guided], starting with step 5. To exit the setting, press the < 78 > button once.
Dimmed Menu Items Example: When set to [Highlight tone priority] Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing < >. If you cancel the overriding function’s setting, the dimmed menu item will become settable. Caution You may not be able to see the overriding function for certain dimmed menu items.
Quick Control During Shooting During Playback You can directly select and set the settings displayed on the screen. During Shooting 1. Press < 2. Select an item. >( Press the < ). >< > keys for selection. When the screen above is displayed, press the < >< >< >< > keys for selection.
3. Select an option. Turn the < > dial or press the < >< > keys to adjust the setting. Some items are set by pressing a button after this. Press < > to return to the previous screen.
During Playback 1. Press < 2. Select an item. >. Press the < 3. >< > keys for selection. Select an option. Turn the < > dial or press the < >< > keys to adjust the setting. Some items are set by pressing a button after this. Configure items labeled with a [ by pressing < >. To cancel this operation, press the < Press < ] icon on the bottom of the screen > button. > to return to the previous screen. Caution For image rotation, set [ : Auto rotate] to [On ] ( ).
Touch-Screen Operation Tapping Dragging Tapping Sample screen (shooting functions screen) Use your finger to tap (touch briefly and then remove your finger from) the screen. For example, when you tap [ ], the Quick Control screen appears. By tapping [ you can return to the preceding screen. ], Note If [ : Beep] is set to [Touch ], the beep will not sound for touch operations ( ). Responsiveness to touch operations can be adjusted in [ : Touch control] ( ).
Dragging Sample screen (Menu screen) Slide your finger while touching the screen.
Basic Zone This chapter describes how to use the Basic Zone modes on the Mode dial for best results. With Basic Zone modes, all you do is point and shoot, and the camera sets everything automatically.
Scene Intelligent Auto Recomposing the Shot Shooting Moving Subjects Scene Icons Adjusting Settings Shooting with Effects Applied (Creative Assist) < > is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can also adjust focus automatically on either the still or moving subject by detecting the motion of the subject ( ). 1. Set the Mode dial to < 2. Press < >. >. Read the message and select [OK].
3. Aim the camera at what you will shoot (the subject). Essentially, the camera focuses on the closest subject. AF points (1) are displayed over any faces or eyes detected. When a frame (AF point) appears on the screen, aim it over the subject. 4. Focus on the subject. Press the shutter button halfway to focus. If < > blinks, manually raise the built-in flash. You can also focus by tapping a person’s face or other subject on the screen (Touch AF). Under low light, the AF-assist beam ( needed.
5. Take the picture. Press the shutter button completely to take the picture. The image just captured will be displayed for approx. 2 sec. on the screen. To retract the built-in flash, push it down with your fingers. Caution Subject movement (whether subjects are still or moving) may not be detected correctly for some subject or shooting conditions. Note AF operation (One-Shot AF or Servo AF) is set automatically when you press the shutter button halfway.
FAQ Focusing is not possible (indicated by an orange AF point). Aim the AF point over an area with good contrast, then press the shutter button halfway ( ). If you are too close to the subject, move away and shoot again. Multiple AF points are displayed simultaneously. Focus has been achieved at all those points. The shutter speed display is blinking. Since it is too dark, taking the picture may result in a blurred subject due to camera shake.
Recomposing the Shot Depending on the scene, positioning the subject toward the left or right to include a balanced background will result in a picture with better perspective. Pressing the shutter button halfway to focus on a still subject will lock the focus on that subject. Recompose the shot while keeping the shutter button pressed halfway, and then press the shutter button completely to take the picture. This is called “focus lock.
Scene Icons The camera detects the scene type and sets everything automatically to suit the scene. In still photo shooting, an icon representing the detected scene appears in the upper left of the screen ( ). Adjusting Settings By touching icons on the screen, you can adjust settings for drive mode, image quality, Touch Shutter, and Creative Assist.
Shooting with Effects Applied (Creative Assist) 1. Press < >. Read the message and select [OK]. 2. Select an effect. Use the < press < >.
3. Select the effect level and other details. Use the < > dial or < >< To reset the setting, press the < 93 > keys to set it, then press < > button, then select [OK]. >.
Creative Assist effects [ ] Preset Select one of the preset effects. Note that [Saturation], [Color tone 1], and [Color tone 2] are not available with [B&W]. [ ] Background blur Adjust background blur. Choose higher values to make backgrounds sharper. To blur the background, choose lower values. [Auto] adjusts background blurring to match the brightness. Depending on lens brightness (f/number), some positions may not be available. [ ] Brightness Adjust image brightness. [ ] Contrast Adjust contrast.
Hybrid Auto With < > mode, you can make a short movie of the day just by shooting still photos. The camera records 2–4-second clips of scenes before each shot, which are later combined in a digest movie ( , ). Still photo shooting functionality is the same as in < > mode. Note that Creative Assist is not available. 1. Set the Mode dial to < 2. Press < >. >. Read the message and select [OK]. Compose your shots and shoot.
Note For more impressive digest movies, keep the camera aimed at subjects for about 4 sec. before shooting still photos. Battery life is shorter in this mode than in < > mode, because digest movies are recorded for each shot. A digest movie may not be recorded if you shoot a still photo immediately after turning the camera on, selecting < > mode, or operating the camera in other ways. Any sounds and vibrations from your camera or lens operations will be recorded in digest movies.
Special Scene Mode The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. *< > stands for Special Scene. 1. Set the Mode dial to < 2. Press < >. >.
3. Select a shooting mode. Use the < then press < > dial or < >. >< > keys to select a shooting mode, Note You can also set the shooting mode in [ : Shooting mode]. When [ : Mode guide] is set to [Disable], after step 1, press < > to access the Quick Control screen, use the < > dial or < >< > keys to select a shooting mode, then press < >.
Available Shooting Modes in Mode Shooting Mode Self Portrait Close-up Portrait Food Smooth skin Night Portrait Landscape Handheld Night Scene Sports HDR Backlight Control Panning Silent Mode 99
Self Portrait Mode To take shots that include yourself, use [ ] (Self Portrait) mode. Rotate the screen around toward the lens. Customizable image processing includes skin smoothing as well as brightness and background adjustment to make yourself stand out. Shooting tips Set the brightness and smooth skin effect. [Brightness] and [Smooth skin effect] can be set in a range of five levels. In [Background], you can adjust the level of background blurring. Tap the screen to shoot.
Portrait Mode Use [ ] (Portrait) mode to blur the background and make the person you shoot stand out. It also makes skin tones and hair look softer. Shooting tips Select the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look. The subject will also stand out better against an uncluttered dark background. Use a telephoto lens.
Smooth Skin Mode Use [ ] (Smooth skin) mode to make skin look more attractive. Image processing makes skin look smoother. Shooting tips Enable the camera to detect faces. Frames are displayed around any main subjects detected for skin smoothing. For more effective skin smoothing, you can move closer to or farther from the subject so that the frame is displayed on the subject’s face. Focus on the face. As you focus before shooting, make sure the AF point on the subject’s face is green.
Landscape Mode Use [ ] (Landscape) mode for expansive scenery, to keep everything in focus from near to far. For vivid blues and greens, and sharp and crisp images. Shooting tips With a zoom lens, use the wide-angle end. When using a zoom lens, set the lens to the wide-angle end to make the objects near and far in focus. It also adds breadth to landscapes. Keep the camera steady when shooting night scenes. Using a tripod is recommended. Caution Flash photography is not available.
Sports Mode Use [ ] (Sports) mode to shoot subjects in motion, such as runners or moving vehicles. Shooting tips Use a telephoto lens. Use of a telephoto lens is recommended to enable shooting from a distance. Track the subject with the Area AF frame. An Area AF frame appears after you press the shutter button halfway. Once the subject is in focus, the AF point turns blue. Shoot continuously. ] (High speed continuous).
Panning Mode By panning, you can blur the background to convey a sense of speed. Attach a lens compatible with [ ] (Panning) mode to reduce subject blurring and keep subjects clear and sharp. Shooting tips Turn the camera to follow the moving subject. As you shoot, turn the camera smoothly while tracking the moving subject.
Caution For details on lenses compatible with [ ] mode, visit the Canon website. Shutter speeds are slower. For this reason, Panning mode is not suitable unless you pan as you shoot. The default setting is [ ]. Note that [ ] is not available. Flash photography is not available. Although lens IS is applied to images captured with lenses supporting [ ] mode, the effect is not shown on the screen as you shoot. (IS and subject blur correction are activated when you shoot, regardless of the lens IS setting.
Close-up Mode Use [ ] (Close-up) mode for close-ups of small subjects such as flowers. To make small things appear much larger, use a macro lens (sold separately). Shooting tips Use a simple background. A simple background makes small objects such as flowers stand out better. Move in as close as possible to the subject. Check the lens for its minimum focusing distance. The lens minimum focusing distance > (focal plane) mark on the top of the camera to the subject.
Food Mode Use [ ] (Food) mode for culinary photography. The photo will look bright and appetizing. Also, the reddish tinge due to the light source will be suppressed in the pictures taken under tungsten lights, etc. Shooting tips Change the color tone. [Color tone] can be adjusted. To increase the reddish tinge of food, set toward [Warm tone] (red), or set toward [Cool tone] (blue) if it looks too red. Caution The warm color cast of subjects may appear faded.
Night Portrait Mode Use [ ] (Night Portrait) mode for bright, beautiful shots of people with night scenes in the background. Note that shooting in this mode requires the built-in flash or a Speedlite. Using a tripod is recommended. Shooting tips Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to obtain a wide night view. Because camera shake occurs in handheld shooting, using a tripod is also recommended. Check the image brightness.
Caution Tell subjects to remain still for a moment after the flash fires. Focusing may be difficult if subject faces look dark when you shoot. Focus manually in this case, either by pressing the < > key to specify [MF] focus mode > ( , ). or by setting the lens focus mode switch to < Autofocusing at night or in dark scenes may be difficult when points of light lie within the AF point.
Handheld Night Scene Mode [ ] (Handheld Night Scene) mode enables handheld shooting for night scenes. In this shooting mode, four shots are taken consecutively for each picture, and the resulting image with reduced camera shake is recorded. Shooting tips Hold the camera steady. Keep your elbows close to your body to hold the camera steady ( ).
Caution Compared to other shooting modes, the image area will be smaller. RAW image quality cannot be set. Autofocusing at night or in dark scenes may be difficult when points of light lie within the AF point. Focus manually in this case, either by pressing the < > key > to specify [MF] focus mode or by setting the lens focus mode switch to < ( , ). Flash photography is available only with an external flash unit attached. Shooting subjects at close range with an external flash unit may cause overexposure.
HDR Backlight Control Mode Use [ ] ( HDR Backlight Control) mode for backlit scenes with both bright and dark areas. Shooting once in this mode captures three consecutive images at different exposures, which are combined to create a single HDR image that retains detail in shadows that might otherwise be lost from backlighting. * HDR stands for High Dynamic Range. Shooting tips Hold the camera steady. Keep your elbows close to your body to hold the camera steady ( ).
Silent Mode Where silence is needed, you can shoot without beeps or shutter release sounds. As you shoot, a white frame is momentarily displayed around the screen. Shooting tips Take some test shots. Consider taking some test shots in advance, because lens aperture and focusing adjustment may be audible under some shooting conditions. Caution Be responsible when using silent shooting, and respect subject privacy and portrait rights. Images of fast-moving subjects may look distorted.
Creative Filters Mode Creative Filter Characteristics Adjusting the Miniature Effect You can shoot with filter effects applied. Filter effects can be previewed before you shoot. 1. Set the Mode dial to < 2. Press < >. >.
3. Select a filter effect. Use the < then press < > dial or < >. >< > keys to select a filter effect ( ), The image is shown with the filter effect applied. 4. Adjust the effect and shoot. Press < > and select an icon below [Creative filters] (except / / / ). Use the < press < >. > dial or < >< / > keys to adjust the effect, then Caution RAW and RAW+JPEG are not available. When RAW image quality is set, images are captured with image quality.
Note With [Grainy B/W], the grainy preview will differ somewhat from the appearance of your shots. With [Soft focus] or [Miniature effect] options, the blurred effect preview may differ somewhat from the appearance of your shots. No histogram is displayed. A magnified view is not available. In Creative Zone modes, some Creative filter settings are available from the Quick Control screen.
Creative Filter Characteristics Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness. Fish-eye effect Gives the effect of a fish-eye lens. The image will have barrel distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes.
HDR art embossed The color saturation, brightness, contrast and gradation are decreased to make the picture look flat, so that the picture looks faded and old. The subject outlines will have intensely bright (or dark) edges. Caution [ ], [ ], [ ], and [ ] precautions Compared to other shooting modes, the image area will be smaller. Shots will look slightly different from the filter effect previews shown on the screen.
Adjusting the Miniature Effect 1. Move the scene frame. Use the scene frame to set an area that will look sharp. To make the scene frame movable (displayed in orange), press the < > button or tap [ ] in the lower right of the screen. By tapping [ ], you can also switch between vertical and horizontal scene frame orientation. Scene frame orientation can also be switched from horizontal orientation by pressing the < >< > keys and from vertical orientation with the < >< > keys.
2. Move the AF point as needed and shoot. The AF point turns orange and can be moved. Press the < >< >< position to focus on. >< > keys to move the AF point to the Aligning the AF point and scene frame is recommended. To return the AF point to the center of the screen, tap [ left of the screen. Press < > to confirm the position of the AF point.
Creative Zone Creative Zone modes give you the freedom to shoot in a variety of ways by setting your preferred shutter speed, aperture value, exposure, and more. To clear the shooting mode description displayed when you turn the Mode dial, press < > ( ).
Program AE Mode (P) The camera automatically sets the shutter speed and aperture value to suit the subject’s brightness. * < > stands for Program. * AE stands for Auto Exposure. 1. Set the Mode dial to < 2. Focus on the subject. >. Aim the AF point over the subject and press the shutter button halfway. 3. Check the display. Standard exposure is available unless the shutter speed and aperture value are blinking.
4. Take the picture. Compose the shot and press the shutter button completely. Caution If the “30"” shutter speed and the lowest aperture value blink, it indicates underexposure. Increase the ISO speed or use flash. If the “1/4000” shutter speed and the highest aperture value blink, it indicates overexposure. Lower the ISO speed or use an ND filter (sold separately) to reduce the amount of light entering the lens.
Shutter-Priority AE Mode (Tv) In this mode, you set the shutter speed and the camera automatically sets the aperture value to obtain the standard exposure matching the brightness of the subject. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion. *< > stands for Time value. Blurred motion (Slow shutter speed: 1/30 sec.) Frozen motion (Fast shutter speed: 1/2000 sec.) 1. Set the Mode dial to < >.
2. Set the desired shutter speed. Turn the < 3. > dial to set it. Focus on the subject. Press the shutter button halfway. 4. Check the display and shoot. As long as the aperture value is not blinking, the standard exposure will be obtained. Caution If the lowest aperture value blinks, it indicates underexposure. Turn the < > dial to set a slower shutter speed until the aperture value stops blinking or set a higher ISO speed. If the highest aperture value blinks, it indicates overexposure.
Note Shutter speed display For shutter speeds slower than 1/4 sec., display changes from the denominator format to ". For example, 0"5 indicates 0.5 sec. and 15", 15 sec.
Aperture-Priority AE Mode (Av) In this mode, you set the desired aperture value and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. A higher f/ number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus. On the other hand, a lower f/number (larger aperture hole) will make less of the foreground and background fall within acceptable focus. *< > stands for Aperture value (aperture opening).
1. Set the Mode dial to < 2. Set the desired aperture value. Turn the < 3. >. > dial to set it. Focus on the subject. Press the shutter button halfway. 4. Check the display and shoot. As long as the shutter speed is not blinking, the standard exposure will be obtained.
Caution If the “30"” shutter speed blinks, it indicates underexposure. Turn the < > dial to decrease the aperture value (open the aperture) until the shutter speed blinking stops or set a higher ISO speed. If the “1/4000” shutter speed blinks, it indicates overexposure. > dial to increase aperture value (close the aperture) until the Turn the < shutter speed blinking stops or set a lower ISO speed. Note Aperture value display The higher the value, the smaller the aperture opening will be.
Depth-of-Field Preview The aperture changes only at the moment you shoot, and it remains open at other times. For this reason, the depth of field shown on the screen looks narrow, or shallow. To check the area in focus, assign [ ] (depth-of-field preview) to a button and press it. Note The larger the aperture value, the wider the area in focus, from the foreground to the background.
Manual Exposure Mode (M) In this mode, you set both the shutter speed and aperture value as desired. To determine the exposure, refer to the exposure level indicator or use a commercially available exposure meter. *< > stands for Manual. 1. Set the Mode dial to < 2. Set the ISO speed. >. With ISO Auto, you can set exposure compensation ( 3. Set the desired shutter speed. Turn the < > dial to set it. 132 ).
4. Set the desired aperture value. Press the < > key to select the aperture value, then turn the < dial to set a value. 5. > Focus on the subject. (1) Standard exposure index (2) Exposure level mark Press the shutter button halfway. Check the exposure level mark [ ] to see how far the current exposure level is from the standard exposure level. 6. Set the exposure and take the picture. Check the exposure level indicator and set the desired shutter speed and aperture value.
Exposure Compensation with ISO Auto If the ISO speed is set to [AUTO] for manual exposure shooting, you can set exposure compensation ( ) as follows: Tap the exposure level indicator [ : Expo.comp./AEB] Caution Exposure may not be as expected when ISO Auto is set, because the ISO speed is adjusted to ensure standard exposure for your specified shutter speed and aperture value. In this case, set the exposure compensation.
Long (Bulb) Exposures In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. Use bulb exposures for night scenes, fireworks, astrophotography, and other subjects requiring long exposures. 1. Set the Mode dial to < 2. Set the shutter speed to [BULB]. Turn the < >. > dial to the left to set [BULB].
3. Set the desired aperture value. Press the < > key to select the aperture value, then turn the < dial to set a value. 4. Take the picture. The exposure will continue for as long as you keep the shutter button pressed completely. Elapsed exposure time is shown on the screen. Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components.
AF, Drive, and Exposure Settings This chapter describes how to configure AF, drive mode, metering mode, and related settings. Caution < > stands for autofocus. < > stands for manual focus.
AF Operation One-Shot AF for Still Subjects Servo AF for Moving Subjects AF-assist beam You can select the AF operation characteristics to suit the shooting conditions or subject. In Basic Zone modes, the optimum AF operation is set automatically for the respective shooting mode. 1. Turn the Mode dial to a Creative Zone. 2. Select [ 3. Select an option. : AF operation]. Press the < >< > keys.
Note Without using the menu, you can also switch focus modes by pressing the < key.
One-Shot AF for Still Subjects This AF operation is suited for still subjects. When you press the shutter button halfway, the camera will focus only once. Once a subject is in focus, the focusing AF point turns green and the camera beeps. If focus is not achieved, the AF point will turn orange. The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture.
Servo AF for Moving Subjects This AF operation is suited for moving subjects. While you hold down the shutter button halfway, the camera will keep focusing on the subject continuously. Once a subject is in focus, the focusing AF point turns blue. For details on the continuous shooting speed for continuous shooting, see Drive Mode. Caution Depending on the lens used, the distance to the subject and the subject’s speed, the camera may not be able to achieve correct focus.
AF-assist beam The AF-assist beam ( , ) may fire when you press the shutter button halfway under low light or in similar conditions, to make autofocusing easier. With a Speedlite, configure the setting on the Speedlite as needed. Caution The flash does not emit an AF-assist beam when AF operation is set to [Servo AF]. Note To disable AF-assist beam firing, set [ : AF-assist beam firing] to [Disable].
AF Method Selecting the AF Method Eye Detection Magnified View AF Shooting Tips Shooting Conditions That Make Focusing Difficult AF Range You can select the AF method to suit the shooting conditions or subject. The camera attempts to focus on faces of any people in an AF point or Zone AF frame. In < >, >, and < > mode, [ +Tracking] is set automatically. For instructions on selecting < an AF method, see Selecting the AF Method. : +Tracking The camera detects and focuses on people’s faces.
: Spot AF The camera focuses in a narrower area than [1-point AF]. : 1-point AF The camera focuses using a single AF point [ ]. : Zone AF Focuses in a wide Zone AF frame, which makes it easier to acquire subjects than with [1point AF]. Prioritizes focusing on the nearest subject. Faces of any people in the Zone AF frame are also given priority in focusing. AF points in focus are displayed with < >.
Selecting the AF Method 1. Select [ 2. Select an option. : AF method]. Note Without using the menu, you can also set the AF method by pressing the < > button.
+Tracking: The camera detects and focuses on people’s faces. If a face moves, the AF point [ ] also moves to track the face. With [Eye detection] set to [Enable], you can shoot with the subject’s eyes in focus ( ). * These instructions apply to the camera with AF operation set to [One-Shot AF] ( AF] ( ) set, the AF point will turn blue when focus is achieved. 1. ). With [Servo Check the AF point. An AF point [ ] appears over any face detected.
2. Focus and take the picture. Once you press the shutter button halfway and the subject is in focus, the AF point turns green and the camera beeps. An orange AF point indicates that the camera could not focus on subjects. Tapping a face for focus Tapping a face or subject to focus on changes the AF point to [ ] and focuses where you tap. Even if the face or subject moves on the screen, the AF point [ ] moves to track it.
Spot AF / 1-point AF / Zone AF You can manually set the AF point or Zone AF frame. Here, 1-point AF screens are used as an example. 1. Check the AF point. The AF point (1) will appear. With Zone AF, the Zone AF frame is displayed. 2. Move the AF point. To move the AF point, tap where you want to focus. To center the AF point, tap [ ]. To move the AF point, press the < >< > keys.
3. Focus and take the picture. Aim the AF point over the subject and press the shutter button halfway. When focus is achieved, the AF point will turn green and the beeper will sound. If focus is not achieved, the AF point will turn orange. Caution AF points may not track subjects under some shooting conditions when [Servo AF] is used with Zone AF. Focusing with an AF-assist beam may be difficult with AF points near the edge of the screen. In this case, move to an AF point in the center of the screen.
Eye Detection With the AF method set to [ +Tracking], you can shoot with the subject’s eyes in focus. 1. Select [ 2. Select [Enable]. : Eye detection].
3. Aim the camera at the subject. An AF point is displayed around their eye. You can also tap the screen to choose an eye. If your selected eye is not detected, an eye to focus on is selected automatically. You can choose an eye or face to focus on with the < >< > keys ] is displayed after you press the < > button, depending when [ on the [Eye detection] setting. 4. Take the picture. Caution Subject eyes may not be detected correctly, depending on the subject and shooting conditions.
Magnified View To check the focus when the AF method is other than [ approx. 5× or 10× by tapping [ ]. +Tracking], magnify display by Magnification is centered on the AF point for [Spot AF] or [1-point AF] and on the Zone AF frame for [Zone AF]. Autofocusing is performed with magnified display if you press the shutter button halfway when set to [Spot AF], and [1-point AF]. When set to [Zone AF], autofocusing is performed after restoring normal display.
AF Shooting Tips Even when focus is achieved, pressing the shutter button halfway will focus again. Image brightness may change before and after autofocusing. Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. If the light source changes as you shoot, the screen may flicker, and focusing may be difficult. In this case, restart the camera and resume shooting with AF under the light source you will use.
Shooting Conditions That Make Focusing Difficult Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.). Fine lines and subject outlines. Under light sources with constantly changing brightness, colors, or patterns.
Manual Focus If focus cannot be achieved with autofocus, follow the procedure below to focus manually. 1. Set [ : Focus mode] to [ ]. Turn the lens focusing ring to set the approximate focus.
2. Magnify the image. Each tap of [ ] switches from normal to 5× to 10× display (and after 10×, back to normal display). (1) AE lock (2) Magnified area position (3) Magnification (approx.) 3. Determine an area to magnify. You can move the magnified area by scrolling with your finger after you tap. To center the magnified area, tap [ 4. ]. Focus manually. While looking at the magnified image, turn the lens focusing ring to focus. After focusing, tap [ ] to return to the normal view.
5. Take the picture. Note When using non EF-M lenses, set the lens focus mode switch to < Even when focusing manually, you can use Touch Shutter to shoot. > in step 1. MF Peaking Settings (Outline Emphasis) As you shoot, edges of subjects in focus can be displayed in color to make focusing easier. You can set the outline color and adjust the sensitivity (level) of edge detection (except in >/< > modes). < 1. Select [ 2. Select [Peaking]. : MF peaking settings]. Select [On].
3. Set the level and color. Set it as necessary. Caution In magnified view, peaking display is not shown. During HDMI output, peaking display is not shown on equipment connected via HDMI. MF peaking may be hard to discern at high ISO speeds, especially when ISO expansion is set. If necessary, lower the ISO speed or set [Peaking] to [Off]. Note Peaking display shown on the screen is not recorded in images.
Drive Mode 1. Select [ 2. Select an option. : Drive mode]. [ ] Single shooting When you hold down the shutter button completely, only one shot will be taken. [ ] High speed continuous When you hold down the shutter button completely, you can shoot continuously at max. approx. 10 shots/sec. while you keep holding it down. With AF operation set to [Servo AF], the continuous shooting speed will be max. approx. 7.4 shots/sec.
Caution The maximum continuous shooting speed for [ ] ( ) is the value in continuous shooting under these conditions: shooting at room temperature (23°C/73°F) with a fully charged Battery Pack LP-E12 at a 1/1000 sec. or faster shutter speed and maximum aperture value (depending on the lens), with Image Stabilizer off (depending on the lens).
Using the Self-Timer 1. Select [ 2. Select an option. : Drive mode]. / : Shoot in 10 sec. Remote control shooting is also possible ( ). / : Shoot in 2 sec. Remote control shooting is also possible ( ). : Shoot continuously in 10 sec. for the specified number of shots Press the < >< > keys to set the number of shots to take (2–10). Remote control shooting is not possible. [ ] and [ ] icons are displayed when the camera is paired with a wireless remote control (sold separately, ).
3. Take the picture. Focus on the subject, then press the shutter button completely. To check operation, look at the self-timer lamp, listen for beeps, or watch the countdown in seconds on the screen. The self-timer lamp blinks faster approx. 2 sec. before the shot. Caution With [ ], the shooting interval may become longer under some shooting conditions, depending on image quality, use of flash, and other factors.
Remote Control Shooting You can shoot remotely by using an optional Wireless Remote Control BR-E1, which pairs via Bluetooth. Wireless Remote Control BR-E1 You can shoot remotely up to approx. 5 meters/16.4 feet from the camera. After pairing the camera and BR-E1 ( ), set the drive mode to [ ] ( ). For operating instructions, refer to the BR-E1 instruction manual. Note Auto power off time may be extended when the camera is set for remote control shooting.
Metering Mode Four methods (metering modes) to measure the subject’s brightness are provided. Normally, evaluative metering is recommended. Evaluative metering is set automatically in Basic Zone modes (except in < : > mode, which uses center-weighted average metering). 1. Select [ 2. Select an option. : Metering mode]. : Evaluative metering General-purpose metering mode suited even for backlit subjects. The camera adjusts the exposure automatically to suit the scene.
: Center-weighted average The metering across the screen is averaged, with the center of the screen weighted more heavily. Caution With (evaluative metering), holding down the shutter button halfway when shooting with [One-Shot AF] locks the exposure value (AE lock). With (partial metering), (spot metering), or (center-weighted average), exposure is set at the moment the picture is taken (without locking the exposure value when the shutter button is pressed halfway).
Exposure Compensation Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation is available in < >, < >, < >, and < > modes. For details on exposure compensation when < > mode and ISO Auto are both set, see Exposure Compensation with ISO Auto. 1. Select the exposure level indicator. Press the < 2. > key to display the indicator. Set the compensation amount.
Note The exposure compensation amount will remain in effect even after you turn off the camera. Can also be set on the shooting functions screen, in [ : Exposure comp./AEB setting] ( ).
Exposure Lock (AE Lock) You can lock the exposure when you want to set the focus and exposure separately or when you will take multiple shots at the same exposure setting. Press the < > button to lock the exposure, then recompose and take the picture. It is effective for shooting backlit subjects, etc. 1. Focus on the subject. Press the shutter button halfway. 2. Press the < > button. [ ] is displayed on the screen to indicate that exposure is locked (AE lock).
AE Lock Effects Metering Mode ( ) AF Point Selection ( ) Automatic Selection Manual Selection Exposure centered on the AF point in focus is locked. Exposure centered on the selected AF point is locked. AE lock is applied at the center AF point. * When set to [ ] with [ : Focus mode] set to [ on the center of the screen. Note AE lock is not possible with bulb exposures.
Flash Photography This chapter describes how to shoot with the built-in flash or an external flash (EL/EX series Speedlites). (< to the right of page titles indicates functions only available in Creative Zone modes >/< >/< >/< >). Caution Flash cannot be used while you are recording movies. AEB is not available in flash photography.
Shooting with the Built-in Flash Shutter Speed and Aperture Value in Flash Photography Shooting With FE Lock Using the built-in flash is recommended when the [ ] icon appears in the viewfinder or on the screen, when subjects in daytime shots are backlit, or when shooting under low light. 1. Manually raise the flash. In Creative Zone modes, shooting with flash is possible whenever the flash is raised. [BUSY] is displayed on the screen while the flash is charging. 2. Press the shutter button halfway.
3. Take the picture. When focus is achieved and you press the shutter button completely, the flash will fire at all times. To retract the built-in flash after shooting, push it down with your fingers until it clicks into place. Shooting tips In bright light, decrease the ISO speed. If the exposure setting in the viewfinder blinks, decrease the ISO speed. Detach the lens hood. Do not get too close to the subject.
Note If the bottom of images is dark when you use super telephoto or large-diameter lenses, consider using an external Speedlite (sold separately, ).
Shooting With FE Lock The background or other factors may make subjects brighter or darker in flash photography with subjects near the edge of the screen. In this case, use FE lock. After setting the flash output for the appropriate subject brightness, you can recompose (put the subject toward the side) and shoot. This feature can also be used with a Canon EL/EX series Speedlite. * FE stands for Flash Exposure. 1. Manually raise the flash.
3. Press the < > button ( ). Center the subject in the viewfinder, then press the < > button. A preflash is fired by the flash, and the flash output required for shooting is retained. [ ] lights up briefly on the screen. Each time you press the < > button, a preflash is fired, and the flash output required for shooting is retained. 4. Take the picture. Compose the shot and press the shutter button completely.
Caution The [ ] icon blinks when subjects are too far away and your shots would be dark. Approach the subject and repeat steps 2–4.
Flash Function Settings Flash Firing E-TTL II Flash Metering Red-Eye Reduction Slow Synchro Built-in Flash Function Settings External Flash Function Settings External Flash Custom Function Settings Clearing Flash Function Settings/C.Fn Settings Functions of the built-in flash or external EL/EX series Speedlites can be set from menu screens on the camera. Before setting functions of external Speedlites, attach the Speedlite and turn it on.
2. Select an option.
Flash Firing Set to [ ] (in Basic Zone or < shooting conditions. > modes) to have the flash fire automatically, based on Set to [ ] to have the flash always fire when you shoot. Select [ beam.
E-TTL II Flash Metering Set to [Eval (FacePrty)] for flash metering suitable for shots of people. Continuous shooting speed for [ ] is slower than when [Evaluative] or [Average] is selected. Set to [Evaluative] for flash metering that emphasizes firing in continuous shooting. If [Average] is set, the flash exposure will be averaged for the entire metered scene. Caution Even when [Eval (FacePrty)] is set, some subjects and shooting conditions may prevent you from obtaining the expected result.
Red-Eye Reduction Set to [Enable] to reduce red-eye by firing the red-eye reduction lamp before firing the flash.
Slow Synchro You can set the flash-sync speed for flash photography in < > mode or < > mode. [ ] 1/200-30sec. auto The flash sync speed is set automatically within a range of 1/200 sec. to 30 sec. to suit the scene’s brightness. Slow-sync shooting is used in low-light locations (under some shooting conditions), and shutter speed is automatically lowered. [ ] 1/200-1/60sec. auto Prevents a slow shutter speed from being set automatically in low-light conditions.
Built-in Flash Function Settings Flash mode Set to [E-TTL II] to shoot in E-TTL II/E-TTL fully automatic flash mode. Set to [Manual flash] to specify your preferred flash output in [ • Only available in < >/< >/< > modes. 183 flash output].
Shutter sync. Normally, set to [1st curtain] so that the flash fires immediately after shooting starts. Set to [2nd curtain] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. Caution When shooting with [2nd curtain], set a shutter speed of 1/60 sec. or slower. For shutter speeds exceeding 1/60 sec., first-curtain synchronization is used automatically even if [2nd curtain] is set.
exp. comp. Set the flash exposure compensation if the brightness of the subject does not come out as desired (so you want to adjust the flash output) in flash photography. You can set the flash exposure compensation up to ±2 stops in 1/3-stop increments. 1. Select [ 2. Set the compensation amount. exp. comp.]. If the exposure is too dark, press the < exposure). If the exposure is too bright, press the < exposure).
Caution Setting [ : Auto Lighting Optimizer] ( ) to an option other than [Disable] may still cause images to look bright even if you set negative flash exposure compensation for darker exposure. If flash exposure compensation is set with a Speedlite (sold separately, ), you cannot set the flash exposure compensation with the camera (Quick Control or external flash function setting). Note that the Speedlite’s setting overrides the camera’s if both are set at the same time.
External Flash Function Settings The information displayed on the screen, position of display, and available options vary depending on the Speedlite model, its Custom Function settings, the flash mode, and other factors. Refer to the instruction manual of your flash unit for details on its functions.
Flash mode You can select the flash mode to suit your desired flash photography. • [E-TTL II] is the standard mode of EL/EX-series Speedlites that support autoexposure flash photography. • [Manual flash] is a mode for manually configuring the Speedlite’s [Flash output] setting. • [CSP] (Continuous shooting priority mode) is available when using a compatible Speedlite. This mode automatically reduces flash output by one stop and increases ISO speed by one stop.
Wireless functions You can use radio or optical wireless transmission to shoot with wireless multiple-flash lighting. For details on wireless flash, refer to the Instruction Manual of a Speedlite compatible with wireless flash photography. Firing ratio control With a macro flash, you can set the firing ratio control. For details on firing ratio control, refer to the Instruction Manual of the macro flash.
Shutter synchronization Normally, set this to [First-curtain synchronization] so that the flash fires immediately after the shooting starts. Set to [Second-curtain synchronization] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. Set to [High-speed synchronization] for flash photography at higher shutter speeds than the maximum flash sync shutter speed.
Flash exposure bracketing Speedlites equipped with flash exposure bracketing (FEB) can change the external flash output automatically as three shots are taken at once.
External Flash Custom Function Settings For details on the external Speedlite’s Custom Functions, refer to the Speedlite’s Instruction Manual. Caution With an EL/EX series Speedlite, the Speedlite will always fire at full output if the [Flash metering mode] Custom Function is set to [1:TTL] (autoflash). Setting or clearing Speedlite Personal Functions (P.Fn) is not possible from the camera’s [ : External flash func. setting] screen. Set them directly from the Speedlite.
Clearing Flash Function Settings/C.Fn Settings 1. Select [Clear settings]. 2. Select the settings to be cleared. Select [Clear built-in flash set.], [Clear external flash set.], or [Clear ext. flash C.Fn set.]. Select [OK] on the confirmation screen to clear all flash settings or Custom Function settings.
Shooting with Speedlites EL/EX Series Speedlites for EOS Cameras Canon Speedlites Other Than the EL/EX Series Non-Canon Flash Units EL/EX Series Speedlites for EOS Cameras The camera supports flash photography using all functions of EL/EX series Speedlites (sold separately). For instructions, refer to the EL/EX series Speedlite’s Instruction Manual.
Non-Canon Flash Units Sync speed The camera can synchronize with non-Canon compact flash units at up to 1/200 sec. With large studio flash units, the flash duration is longer than that of a compact flash unit and varies depending on the model. Before shooting, confirm that flash sync is performed correctly by taking some test shots at a sync speed of approx. 1/60 sec. to 1/30 sec. Caution Manually lower the built-in flash before attaching an external flash unit.
Shooting and Recording This chapter describes shooting and recording and introduces menu settings on the shooting ([ ]) tab.
Still Photo Shooting to the right of page titles indicates functions only available in Creative Zone modes.
• Reverse Display • Viewfinder Display Format • Display Performance • Type of Digest Movie • General Still Photo Shooting Precautions 198
Tab Menus: Still Photo Shooting Shooting 1 (1) Image quality (2) Still img aspect ratio (3) Expo.comp./AEB (4) ISO speed settings (5) Auto Lighting Optimizer (6) Highlight tone priority Shooting 2 (1) Flash control (2) Metering mode (3) White balance (4) Custom White Balance (5) WB Shift/Bkt.
Shooting 3 (1) Picture Style Picture Style Selection Picture Style Customization Picture Style Registration (2) Lens aberration correction (3) Long exp.
Shooting 5 (1) MF peaking settings (2) AF-assist beam firing (3) Lens electronic MF Shooting 6 (1) Drive mode (2) IS (Image Stabilizer) mode (3) Touch Shutter (4) Review duration (5) Metering timer (6) Expo.
Shooting 7 (1) Shooting info. disp. (2) Reverse display (3) VF display format (4) Disp.
Shooting 9 (1) Auto level (2) Shutter btn function for movies In Basic Zone modes, the following screens are displayed. Note that available setting items vary by shooting mode.
Shooting 2 (1) AF method (2) Eye detection (3) Continuous AF (4) Touch & drag AF settings (5) Focus mode Shooting 3 (1) MF peaking settings (2) AF-assist beam firing 204
Shooting 4 (1) Drive mode (2) IS (Image Stabilizer) mode (3) Touch Shutter (4) Review duration (5) Shooting info. disp. (6) Reverse display Shooting 5 (1) VF display format (2) Disp.
Shooting 6 (1) Movie rec quality (2) Sound recording (3) Movie Servo AF (4) Auto level (5) Shutter btn function for movies 206
Image Quality RAW Images Guide to Image Quality Settings Maximum Burst for Continuous Shooting 1. Select [ 2. Set the image quality. : Image quality]. For RAW images, turn the < < >< > keys. Press < > dial, and for JPEGs, press the > to set it. Caution Number of shots available as indicated by [****] on the image quality setting screen always applies to a setting of [3:2], regardless of the actual aspect ratio setting ( ).
Note If [–] is set for both the RAW image and JPEG image, will be set. If you select both RAW and JPEG, each time you shoot, the image will be recorded simultaneously to the card as both a RAW and JPEG image at your specified image qualities. The two images will be recorded with the same file numbers (file extension: .JPG for JPEG and .CR3 for RAW). is in (Fine) quality. Meaning of image quality icons: RAW, Compact RAW, JPEG, Fine, Normal, Large, Medium, Small.
Guide to Image Quality Settings See Specifications for details on file size, number of shots available, maximum burst, and other estimated values. Maximum Burst for Continuous Shooting The estimated maximum burst is shown on the top of the shooting screen. Note When the maximum burst in still photo shooting is indicated as “99,” you can shoot 99 shots or more continuously.
Still Image Aspect Ratio You can change the image’s aspect ratio. 1. Select [ 2. Set the aspect ratio. : Still img aspect ratio]. Select an aspect ratio, then press < >. JPEG images The images will be recorded with the set aspect ratio. RAW Images The images will always be recorded in the [3:2] aspect ratio.
Aspect ratio 4:3 16:9 1:1 Note RAW images shot at an aspect ratio of [4:3], [16:9], or [1:1] are displayed during playback with lines indicating the respective aspect ratio, but these lines are not recorded in the image.
Exposure Compensation/AEB Settings You can capture three images at different shutter speeds, aperture values, and ISO speeds, as adjusted by the camera. This is called AEB. * AEB stands for Auto Exposure Bracketing. 1. Select [ 2. Set the AEB range. : Expo.comp./AEB]. Turn the < > dial to set the AEB range (1). By using the < >< > keys, you can set the amount of exposure compensation. Press < > to set it. Once an AEB range is set, it is shown on the screen on the exposure level indicator.
3. Take the picture. Standard exposure Decreased exposure Increased exposure Three bracketed shots are taken, according to the specified drive mode, in this sequence: Standard exposure, decreased exposure, and increased exposure. AEB will not be automatically canceled. To cancel AEB, follow step 2 to turn off the AEB range display. Caution Exposure compensation in AEB may be less effective with [ Optimizer] ( ) set to an option other than [Disable].
ISO Speed Settings for Still Photos Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In Basic Zone modes, ISO speed is set automatically. For details on ISO speed in movie recording, see ISO Speed in Movie Recording. 1. Tap the ISO speed icon.
2. Set the ISO speed. Set by pressing the < >< > keys. ISO speed can be set within ISO 100–25600 in 1/3-stop increments. With [AUTO] selected, ISO speed is set automatically. When [AUTO] is selected, pressing the shutter button halfway will display the ISO speed actually set. To specify [AUTO] when setting [ISO speed] in [ : settings] (shown above), press the < > button.
ISO speed guide Low ISO speeds reduce image noise but may increase the risk of camera/subject shake or reduce the area in focus (shallower depth of field), in some shooting conditions. High ISO speeds enable low-light shooting, a larger area in focus (deeper depth of field), and longer flash range but may increase image noise. Note Can also be set on the [ISO speed] screen in [ : ISO speed settings].
Maximum [AUTO] ISO Speed For ISO Auto, you can set the maximum ISO speed limit within ISO 400–25600. 1. Select [ 2. Select [Max for Auto]. : ISO speed settings]. Select [Max for Auto], then press < 3. >. Select the ISO speed. Select the ISO speed, then press < 217 >.
Auto Lighting Optimizer Brightness and contrast can be corrected automatically if shots look dark or contrast is too low or high. 1. Select [ 2. Set a correction option. : Auto Lighting Optimizer]. Caution Noise may increase and apparent resolution may change, under some shooting conditions. If the effect of Auto Lighting Optimizer is too strong and results are not at your preferred brightness, set to [Low] or [Disable].
Note To enable [ : Auto Lighting Optimizer] to be set even in < > mode, press the < > button in step 2 to clear the checkmark [ ] for [Disable during man expo].
Highlight Tone Priority You can reduce overexposed, clipped highlights. 1. Select [ 2. Set an option. : Highlight tone priority]. [Enable]: Improves gradation in highlights. The gradation between the grays and highlights becomes smoother. [Enhanced]: Reduces overexposed highlights even more than [Enable], under some shooting conditions. Caution Noise may increase slightly. The available ISO range starts at ISO 200. Expanded ISO speeds cannot be set. [Enhanced] is not available when recording movies.
White Balance Settings White Balance [ ] Auto White Balance [ ] Custom White Balance [ ] Color Temperature White balance (WB) is for making the white areas look white. Normally, the Auto [ ] (Ambience priority) or [ ] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object. 1. Select [ 2. Select an option. : White balance].
(Approx.) Display Mode Color Temperature (K: Kelvin) Auto: Ambience priority 3000–7000 Auto: White priority Daylight 5200 Shade 7000 Cloudy, twilight, sunset 6000 Tungsten light 3200 White fluorescent light 4000 Flash Automatically set* Custom 2000–10000 Color temp. 2500–10000 * Applicable with Speedlites having a color temperature transmission function. Otherwise, it will be fixed to approx. 6000K.
[ ] Auto White Balance With [ ], you can slightly increase the intensity of the image’s warm color cast when shooting a tungsten-light scene. If you select [ ], you can reduce the intensity of the image’s warm color cast. 1. Select [ 2. Select [ With [ 3. : White balance]. ]. ] selected, press the < Select an option. 223 > button.
Caution Precautions when set to [ ] The warm color cast of subjects may appear faded. When multiple light sources are included in the scene, the warm color cast of the picture may not be reduced. When using flash, the color tone will be the same as with [ ].
[ ] Custom White Balance With custom white balance, you can manually set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. 1. Shoot a white object. Aim the camera at a plain white object, so that white fills the screen. Focus manually and shoot with the standard exposure set for the white object. You can use any of the white balance settings. 2. Select [ : Custom White Balance].
3. Import the white balance data. Use the < >< > keys to select the image captured in step 1, then press < >. Select [OK] to import the data. 4. Select [ : White balance]. 5. Select [ ]. Caution If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained.
Note Instead of shooting a white object, you can also shoot a gray card or standard 18% gray reflector (commercially available).
[ ] Color Temperature 1. Select [ 2. Set the color temperature. : White balance]. Select [ Turn the < < >. ]. > dial to set the desired color temperature, then press The color temperature can be set from approx. 2500K to 10000K in 100K increments. Caution When setting the color temperature for an artificial light source, set the white balance correction (magenta or green bias) as necessary.
White Balance Correction White Balance Correction White Balance Auto Bracketing White balance correction has the same effect as using a commercially available color temperature conversion filter or color compensating filter. White Balance Correction 1. Select [ : WB Shift/Bkt.].
2. Set the white balance correction. Sample setting: A2, G1 Press the < >< preferred position. > or < >< > keys to move the ■ mark to your B is for blue, A for amber, M for magenta, and G for green. White balance is corrected in the direction you move the mark. On the right of the screen, [Shift] indicates the direction and correction amount, respectively. Pressing the < settings. Press < > button will cancel all the [WB Shift/Bkt.] > to exit the setting.
White Balance Auto Bracketing White balance bracketing enables you to capture three images at once with different color tones. Setting the white balance bracketing amount B/A bias ±3 levels In step 2 for White Balance Correction, when you turn the < the screen will change to “■ ■ ■” (3 points). > dial, the “■” mark on Turning the dial clockwise sets the B/A bracketing, and turning it counterclockwise sets the M/G bracketing.
Color Space The range of reproducible colors is called the “color space.” For normal shooting, sRGB is recommended. 1. Select [ 2. Set a color space option. : Color space]. Adobe RGB This color space is mainly used for commercial printing and other professional applications. Recommended when using equipment such as Adobe RGB-compatible monitors or DCF 2.0 (Exif 2.21 or later) compatible printers. Note File names of still photos shot in the Adobe RGB color space begin with “_”.
Picture Style Selection Picture Style Characteristics Symbols Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. 1. Select [ 2. Select a Picture Style. : Picture Style].
Picture Style Characteristics [ ] Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid for blue skies, greenery and sunsets, particularly in nature, outdoor, and sunset scenes. Note If the desired color tone is not obtained with [Auto], use another Picture Style. [ ] Standard The image looks vivid, sharp, and crisp. Suitable for most scenes. [ ] Portrait For smooth skin tones, with slightly less sharpness. Suited for close-up portraits.
[ ] User Def. 1–3 You can add a new style based on presets such as [Portrait] or [Landscape] or a Picture Style file, then adjust it as needed ( ). Shots taken with a style you have not customized yet will have the same characteristics as the default [Auto] setting.
Symbols Icons on the Picture Style selection screen represent [ Strength], [ Fineness], and [ Threshold] for [ Sharpness] as well as [ Contrast] and other parameters. The numbers indicate the values for these settings specified for the respective Picture Style. Strength Sharpness Fineness Threshold Contrast Saturation Color tone Filter effect (Monochrome) Toning effect (Monochrome) Caution For movie recording, * is indicated for both [ Fineness] and [ Threshold] parameters of [ Sharpness].
Picture Style Customization Settings and Effects [ ] Monochrome Adjustment You can customize any Picture Style by changing it from the default settings. For details on customizing [Monochrome], see [ ] Monochrome Adjustment. 1. Select [ 2. Select a Picture Style. : Picture Style]. Select the Picture Style to adjust, then press the < 237 > button.
3. Select an option. For details on settings and effects, see Settings and Effects. 4. Set the effect level. Set the value, then press < >. Press the < > button to save the adjusted setting and return to the Picture Style selection screen. Any settings you change from default values are displayed in blue.
Settings and Effects Strength 0: Weak outline emphasis Fineness*1 1: Fine 5: Grainy Threshold*2 1: Low 5: High Contrast -4: Low contrast +4: High contrast Saturation -4: Low saturation +4: High saturation Color tone -4: Reddish skin tone +4: Yellowish skin tone Sharpness 7: Strong outline emphasis * 1: Indicates the edge thinness that enhancement applies to. The smaller the number, the finer the outlines that can be emphasized.
[ ] Monochrome Adjustment [ Filter effect] With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more. Filter Sample Effects N:None Normal black-and-white image with no filter effects. Ye:Yellow Blue sky will look more natural, and white clouds will look crisper. Or:Orange The blue sky will look slightly darker. The sunset will look more brilliant. R:Red The blue sky will look quite dark. Fall leaves will look crisper and brighter.
[ Toning effect] By applying a toning effect, you can create a monochrome image in the selected color. Effective when you want to create memorable images.
Picture Style Registration You can select a base Picture Style such as [Portrait] or [Landscape], adjust it as desired, and register it under [User Def. 1] – [User Def. 3]. Useful when creating several Picture Styles with different settings. Picture Styles that you have registered on the camera using EOS Utility (EOS software, ) can also be modified here. 1. Select [ 2. Select a user-defined style number. : Picture Style]. Select a number from [User Def. 1] to [User Def. 3], then press the < > button.
3. Press < >. With [Picture Style] selected, press < 4. >. Select a base Picture Style. Select the base Picture Style. Also select styles this way when adjusting styles registered to the camera with EOS Utility (EOS software). 5. Select an option.
6. Set the effect level. For details, see Picture Style Customization. Press the < > button to save the adjusted setting and return to the Picture Style selection screen. The base Picture Style will be indicated on the right of [User Def. *]. Blue style names indicate that you have changed the settings from default values. Caution If a Picture Style is already registered under [User Def.
Lens Aberration Correction Peripheral Illumination Correction Distortion Correction Digital Lens Optimizer Chromatic Aberration Correction Diffraction Correction Vignetting, image distortion, and other issues may be caused by lens optical characteristics. The camera can compensate for these phenomena by using [Lens aberration correction]. 1. Select [ 2. Select an option. : Lens aberration correction].
3. Select [Enable]. Confirm that the name of the attached lens and [Correction data available] are displayed (except when [Diffraction correction] is set). If [Correction data not available] or a [ Digital Lens Optimizer. ] icon is displayed, see Peripheral Illumination Correction Vignetting (dark image corners) can be corrected. Caution Depending on shooting conditions, noise may appear on the image periphery. The higher the ISO speed, the lower the amount of correction will be.
Distortion Correction Distortion (image warping) can be corrected. Caution To correct distortion, the camera captures a narrower image area than the area seen when shooting, which crops the image a little and slightly lowers the apparent resolution. Applying distortion correction may change the angle of view slightly. When you magnify images, distortion correction is not applied to the images displayed. Distortion correction is not applied in movie recording.
Digital Lens Optimizer Various aberrations from lens optical characteristics can be corrected, along with diffraction and low-pass filter-induced loss of resolution. If [Correction data not available] or [ ] is displayed by [Digital Lens Optimizer], you can use EOS Utility to add the lens correction data to the camera. For details, refer to the EOS Utility Instruction Manual. Caution Depending on shooting conditions, noise may be intensified together with the effects of correction.
Chromatic Aberration Correction Chromatic aberration (color fringing around subjects) can be corrected. Note [Chromatic aberr corr] is not displayed when [Digital Lens Optimizer] is set to [Enable].
Diffraction Correction Diffraction (loss of sharpness caused by the aperture) can be corrected. Caution Depending on shooting conditions, noise may be intensified together with the effects of correction. The higher the ISO speed, the lower the amount of correction will be. For movie recording, [Diffraction correction] will not appear. (Correction is not possible.) Note “Diffraction correction” corrects degraded resolution not only from diffraction but also from the low-pass filter and other factors.
Note General notes for lens aberration correction Effects of lens aberration correction vary by lens and shooting conditions. Also, the effect may be difficult to discern depending on the lens used, shooting conditions, etc. If the correction is difficult to discern, magnifying and checking the image after shooting is recommended. Corrections are applied even when an extender or life-size converter is attached.
Noise Reduction Features Long Exposure Noise Reduction High ISO Speed Noise Reduction Long Exposure Noise Reduction Noise that tends to occur in long exposures at shutter speeds of one sec. or slower can be reduced. 1. Select [ : Long exp. noise reduction].
2. Set a reduction option. [ ] Auto For images exposed for 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected. This setting is effective enough in most cases. [ ] Enable Noise reduction is performed for all images exposed for 1 sec. or longer. The [Enable] setting may reduce noise that cannot be detected with the [Auto] setting. Caution With [Auto] or [Enable] set, noise reduction after you shoot may take as long as exposure for the shot.
High ISO Speed Noise Reduction You can reduce the image noise generated. This function is especially effective when shooting at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced. 1. Select [ 2. Set the level. : High ISO speed NR]. [ ] Multi Shot Noise Reduction Applies noise reduction with higher image quality than [High].
Caution Precautions when set to [Multi Shot Noise Reduction] If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. Be careful about camera shake in handheld shots. Using a tripod is recommended. If you shoot a moving subject, the moving subject may leave afterimages. Auto image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
Appending Dust Delete Data Preparation Dust Delete Data Acquisition Dust Delete Data Appending Dust Delete Data used to erase dust spots can be appended to images in case sensor cleaning leaves dust on the sensor. The Dust Delete Data is used by Digital Photo Professional (EOS software) to erase the dust spots automatically. Preparation Prepare a solid white object such as a sheet of paper. Set the lens focal length to 50 mm or longer.
Dust Delete Data Acquisition 1. Select [ : Dust Delete Data].
2. Select [OK]. After the automatic self-cleaning of the sensor is performed, a message will appear. Although there will be a mechanical sound of the shutter during the cleaning, no picture is taken.
3. Shoot a plain white object. Shoot with a plain white object (such as a new sheet of white paper) filling the screen, at a distance of 20–30 cm (0.7–1.0 ft.). Since the image will not be saved, the data can still be obtained even if there is no card in the camera. When the picture is taken, the camera will start collecting the Dust Delete Data. When the Dust Delete Data is obtained, a message will appear. If the data is not obtained successfully, an error message will appear.
Dust Delete Data Appending Once acquired, Dust Delete Data is appended to still photos captured after that point. Acquiring Dust Delete Data before shooting is recommended. For details about using Digital Photo Professional (EOS software) to erase dust spots automatically, refer to the Digital Photo Professional Instruction Manual. File size is essentially unaffected by Dust Delete Data appended to images.
Continuous AF This function keeps subjects generally in focus. The camera is ready to focus immediately when you press the shutter button halfway. 1. Select [ 2. Select [Enable]. : Continuous AF]. Caution Fewer shots are available when set to [Enable], because the lens is driven continuously and battery power is consumed.
Touch & Drag AF Settings Touch & Drag AF Tapping to Select Subjects for Positioning Method Active Touch Area You can move the AF point or Zone AF frame by tapping or dragging on the screen as you look through the viewfinder. Touch & Drag AF 1. Select [ 2. Select [Touch & drag AF]. : Touch & drag AF settings]. Select [Enable].
Tapping to Select Subjects for To switch the subject tracked to a different person when several faces are detected with the AF method set to , you can tap the area set in [Active touch area]. Note that this setting is not available with [Touch & drag AF] set to [Enable]. 1. Select [Tap to select subject for 2. Select [On]. ]. Note To switch to a person on the left, tap the left side of the area set in [Active touch area], and to switch to a person on the right, tap the right side.
Positioning Method You can set how positions are specified by tapping or dragging. 1. Set [Positioning method]. Absolute The AF point moves to the tapped or dragged position on the screen. Relative The AF point moves in the direction you drag, as much as you drag, no matter where you touch the screen.
Active Touch Area You can specify the area of the screen used for tap and drag operations. 1. Select [Active touch area]. 2. Set the area that will respond to touch. Note Tapping the screen with [ +Tracking] set displays a round orange frame [ ]. After you lift your finger at the position to move the AF point to, [ ] is displayed and that subject is tracked. To cancel subject selection, hold down the < > button.
Focus Mode You can specify the method of focusing (focus mode) when using EF-M lenses. 1. Select [ 2. Select an option. : Focus mode].
AF-Assist Beam Firing You can enable firing of the camera’s AF-assist beam. 1. Select [ 2. Select an option. : AF-assist beam firing]. [ ] Enable Enables firing of the AF-assist beam, when needed. [ ] Disable Disables firing of the AF-assist beam. Set if you prefer not to fire the AF-assist beam.
Lens Electronic MF For EF-M, EF, or EF-S lenses equipped with electronic manual focusing, you can specify how manual focus adjustment is used with One-Shot AF. 1. Select [ 2. Select an item. : Lens electronic MF]. Disable after One-Shot AF After the AF operation, manual focusing adjustment is disabled. Enable after One-Shot AF You can manually adjust the focus after the AF operation if you keep holding down the shutter button halfway.
Image Stabilization You can adjust the Image Stabilizer (IS) setting when using IS-equipped EF-M lenses. For details on [ Digital IS], see Movie Digital IS. 1. Select [ 2. Select [IS mode]. : IS (Image Stabilizer) mode].
3. Select an option. [Off] Deactivates image stabilization. [On] Camera shake will be corrected. Caution [IS mode] is not displayed for IS-equipped EF or EF-S lenses. If image stabilization cannot prevent camera shake, mount the camera on a tripod or take other measures to hold it still. In this case, set [IS mode] to [Off].
Touch Shutter Just by tapping the screen, you can focus and take the picture automatically. 1. Enable the Touch Shutter. Tap [ ] on the screen’s bottom right. Each time you tap the icon, it will toggle between [ ] and [ ]. [ ] (Touch Shutter: Enable) The camera will focus on the spot you tap, then the picture will be taken. [ ] (Touch Shutter: Disable) You can tap a spot to perform focusing on the spot. Press the shutter button completely to take the picture.
2. Tap the screen to shoot. Tap the face or subject on the screen. On the point you tap, the camera will focus (Touch AF) with the AF method that was set ( ). When [ ] is set, the AF point turns green when focus is achieved, then the picture is taken automatically. If focus is not achieved, the AF point turns orange and the picture cannot be taken. Tap the face or subject on the screen again. Caution The camera shoots in single shooting mode regardless of the drive mode setting.
Review Duration Set to [Hold] to keep the captured image displayed after you shoot, or set to [Off] if you prefer not to have shots displayed. 1. Select [ 2. Set a time option. : Review duration]. Note When [Hold] is set, images are displayed until the time set in [ : Power saving] elapses.
Metering Timer You can set how long the metering timer runs (which determines the duration of exposure value display) after it is triggered automatically by an action such as pressing the shutter button halfway. 1. Select [ 2. Set a time option. : Metering timer].
Exposure Simulation With exposure simulation, image brightness more closely matches the actual brightness (exposure) of your shots. 1. Select [ 2. Select an option. : Expo. simulation]. [Enable] ( ) The displayed image brightness will be close to the actual brightness (exposure) of the resulting image. If you set exposure compensation, the image brightness will change accordingly. [Disable] ( ) The image is displayed at standard brightness, so it is easy to see.
Shooting Information Display Customizing Information on the Screen Customizing Information in the Viewfinder Viewfinder Vertical Display Grid Histogram Clearing Settings You can customize the details and screens of information shown on the screen or in the viewfinder when you shoot. Customizing Information on the Screen 1. Select [ 2. Select [Screen info. settings]. : Shooting info. disp.].
3. Select screens. Press the < the camera. >< > keys to select screens of information to show on For information you prefer not to display, press < checkmark [ ]. To edit the screen, press the < 4. > to clear the > button. Edit the screen. Press the < screen. >< > keys to select options to show on the information For items you prefer not to display, press < [ ]. > to clear the checkmark Select [OK] to register the setting.
Customizing Information in the Viewfinder 1. Select [ 2. Select [VF info/toggle settings]. 3. Select screens. : Shooting info. disp.]. Press the < viewfinder. >< > keys to select information screens to show in the For information you prefer not to display, press < checkmark [ ]. > to clear the To edit the screens when screen 2 or 3 is selected, press the < button.
4. Edit the screen. Press the < >< > keys to select options to show on the information screen in the viewfinder. For items you prefer not to display, press < [ ]. > to clear the checkmark Select [OK] to register the setting. Note Add a checkmark to [ ] to display an electronic level as a guideline for ensuring that the camera is level from front to back and left to right. The red line turns green when the image is essentially straight.
Viewfinder Vertical Display You can select how viewfinder information is displayed when you are shooting still photos vertically. 1. Select [ 2. Select [VF vertical display]. : Shooting info. disp.].
3. Select an option. On Information is automatically rotated, making it easier to read. Off Information is not automatically rotated.
Grid A grid can be displayed on the screen and viewfinder. 1. Select [ 2. Select [Grid display]. 3. Select an option. : Shooting info. disp.].
Histogram You can select the content and display size of the histogram. 1. Select [ 2. Select [Histogram disp]. 3. Select an option. : Shooting info. disp.]. Select the content ([Brightness] or [RGB]) and display size ([Large] or [Small]).
Clearing Settings 1. Select [ 2. Select [Reset]. 3. Select [OK]. : Shooting info. disp.].
Reverse Display A mirror image can be displayed when you shoot with the screen rotated toward the subject (toward the front of the camera). 1. Select [ 2. Select [On]. : Reverse display]. Select [Off] if you prefer not to reverse display when the screen is rotated toward the front.
Viewfinder Display Format 1. Select [ 2. Select an option. : VF display format].
Display Performance You can select the performance parameter to prioritize in shooting screen display for still photos. 1. Select [ 2. Select an option. : Disp. performance].
Type of Digest Movie Both still photos and clips are captured when you shoot in < > mode, but you can specify whether to include the still photos in the resulting digest movie. 1. Set the Mode dial to < 2. Select [ >. : Digest type].
3. Select an option. [Include stills] Digest movies include still photos. [No stills] Digest movies do not include still photos.
General Still Photo Shooting Precautions During Shooting Information Display During Shooting Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. Image quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable. Shooting in high temperatures may cause noise and irregular colors in the image.
Shooting results In magnified view, the shutter speed and aperture value will be displayed in orange. If you take the picture in magnified view, the exposure may not come out as desired. Return to the normal view before taking the picture. Even if you take the picture in magnified view, the image will be captured with the image area of the normal view. Images and display Under low- or bright-light conditions, the displayed image may not reflect the brightness of the captured image.
Information Display For details on the icons displayed for still photo shooting, see Still Photo Shooting Screen. Note White display of the [ ] icon indicates that your shots will be about as bright as the image displayed. If the [ ] icon is blinking, it indicates that the image is displayed at a brightness that differs from the actual shooting result because of low- or bright-light conditions. However, the actual image recorded will reflect the exposure setting.
Movie Recording For movie recording, set the Mode dial to < >. Caution When switching from still photo shooting to movie recording, check the camera settings again before recording movies. Note You can record movies by pressing the movie shooting button during still photo shooting.
Tab Menus: Movie Recording Shooting 1 (1) Shooting mode (2) Movie rec quality (3) Sound recording Shooting 2 (1) Exposure comp.
Shooting 3 (1) White balance (2) Custom White Balance (3) WB correction (4) Picture Style Picture Style Selection Picture Style Customization Picture Style Registration (5) Lens aberration correction Shooting 4 (1) Video snapshot (2) Time-lapse movie 295
Shooting 5 (1) AF method (2) Eye detection (3) Touch & drag AF settings (4) Focus mode (5) MF peaking settings Shooting 6 (1) Lens electronic MF (2) Movie Servo AF Shooting 7 (1) Movie self-timer (2) Remote control 296
Shooting 8 (1) IS (Image Stabilizer) mode (2) Digital zoom (3) Auto level (4) Shutter btn function for movies (5) Metering timer (6) Shooting info. disp.
Movie Recording Autoexposure Movie Recording Manual Exposure Movie Recording ISO Speed in Manual Exposure Recording Still Photo Shooting Information Display (Movie Recording) Autoexposure Movie Recording Exposure is controlled automatically to suit the brightness. 1. Set the Mode dial to < Press < >. >. When the screen above is displayed, tap the recording mode icon.
2. Select [ ]. You can also select [ mode]. 3. ] (Movie auto exposure) from [ : Shooting Focus on the subject. Before recording a movie, focus with AF ( ) or manually ( ). By default, [ : Movie Servo AF] is set to [Enable] so that the camera always keeps focusing ( ). Pressing the shutter button halfway focuses using the current AF method.
4. Record the movie. Press the movie shooting button to start recording a movie. You can also start recording a movie by tapping [ ] on the screen. Note [ ] is not displayed under the following settings. • With [Video snapshot] set to [Enable] • With [Time-lapse movie] set to an option other than [Disable] • With [Miniature effect movie] set to an option other than [Off] While the movie is being recorded, the [ in the upper right of the screen.
ISO Speed in [ ] Mode ISO speed is set automatically. For details on ISO speed, see ISO Speed in Movie Recording. Note You can lock the exposure (AE lock) by pressing the < > button ( ). To cancel AE lock, press the < > button again. Exposure compensation in manual exposure movie recording can be set in a range of up to ±3 stops. ISO speed, shutter speed, and aperture value are not recorded in movie Exif information.
Manual Exposure Movie Recording You can manually set the shutter speed, aperture value, and ISO speed for movie recording. 1. Set the Mode dial to < Press < >. >. When the screen above is displayed, tap the recording mode icon. 2. Select [ ]. You can also select [ mode]. ] (Movie manual exp.
3. Set the ISO speed. Tap the ISO speed icon. The ISO speed setting screen is displayed. Set with the < 4. > dial or < >< > keys. Set the shutter speed and aperture value. Press the shutter button halfway and check the exposure level indicator. Press the < turn the < > key to select the shutter speed or aperture value, then > dial to set a value. Shutter speed can be set in a range of 1/4000–1/8 sec.
5. Focus and record the movie. Same as step 4 in Autoexposure Movie Recording. Caution During movie recording, avoid changing the shutter speed, aperture value, or ISO speed, which may record changes in the exposure or create more noise at high ISO speeds. When recording a movie of a moving subject, a shutter speed of approx. 1/25 sec. to 1/125 sec. is recommended. The faster the shutter speed, the less smooth the subject’s movement will look.
ISO Speed in Manual Exposure Recording You can set the ISO speed manually or select [ Speed in Movie Recording. ]. For details on ISO speed, see ISO Still Photo Shooting Still photos cannot be taken during movie recording. To shoot still photos, turn the Mode dial to switch to another shooting mode. Information Display (Movie Recording) For details on the icons on the movie recording screen, see Movie Recording Screen.
Movie Recording Quality Movie Recording Size 4K Movie Recording Frame Rate (fps: frames per second) Compression Method Movie recording format Cards That Can Record Movies High Frame Rate Movie Files Exceeding 4 GB Total Movie Recording Time and File Size Per Minute Movie Recording Time Limit You can set the recording size, frame rate, and compression method in [ : Movie rec quality]. The movie will be recorded as an MP4 file.
Movie Recording Size [ ] 3840×2160 The movie is recorded in 4K quality. The aspect ratio is 16:9. [ ] 1920×1080 The movie will be recorded in Full High-Definition (Full HD) quality. The aspect ratio is 16:9. [ ] 1280×720 The movie is recorded in High-Definition (HD) quality. The aspect ratio is 16:9. Caution If you change the [ : Video system] setting, also set [Movie rec. size] again. Normal playback of 4K and / movies may not be possible on other devices, because playback is processing-intensive.
Frame Rate (fps: frames per second) [ ] 59.94 fps/[ ] 29.97 fps/[ ] 23.98 fps Set for areas using the NTSC TV system, such as North America, Japan, South Korea, and Mexico. [ ] 50.00 fps/[ ] 25.00 fps Set for areas using the PAL TV system, such as Europe, Russia, China, and Australia. Compression Method [ ] IPB (Standard) Compresses multiple frames at a time efficiently for recording. [ ] ALL-I (For editing/I-only) Uses ALL-I compression for time-lapse movie recording ( ).
Cards That Can Record Movies See Card performance requirements (Movie recording) for details on cards that can record at each level of movie recording quality. Test cards by recording a few movies to make sure they can record correctly at your specified size ( ). Caution Format cards before recording 4K movies ( ). If you use a slow-writing card when recording movies, the movie may not be recorded properly.
High Frame Rate You can record HD movies at a high frame rate of 119.88 fps or 100.00 fps by setting [High Frame Rate] in [ : Movie rec quality] to [Enable]. This is ideal for recording movies that will be played back in slow motion. The maximum recording time per movie is 7 min. 29 sec. Movies are recorded in or quality. Sound is not recorded in High Frame Rate movies. Because High Frame Rate movies are recorded as 29.97 fps/25.00 fps movie files, they are played back in slow motion at 1/4 speed.
Movie Files Exceeding 4 GB Even if you record a movie exceeding 4 GB, you can keep recording without interruption. Using SD/SDHC cards formatted with the camera FAT32 formatting is applied when the camera is used to format SD/SDHC cards. With a FAT32-formatted card, if you record a movie and the file size exceeds 4 GB, a new movie file will be created automatically. When you play back the movie, you will have to play back each movie file individually.
Total Movie Recording Time and File Size Per Minute For details on file sizes and the recording time available at each movie recording size, see Recording Time, Bit Rate, and File Size Guidelines. Movie Recording Time Limit When recording 4K/Full HD/HD movies The maximum recording time per movie is 29 min. 59 sec. Once 29 min. 59 sec. is reached, recording automatically stops. You can start recording a movie again by pressing the movie shooting button (which records the movie as a new file).
Sound Recording Sound Recording/Sound-Recording Level Wind Filter Attenuator External Microphone You can record movies while recording sound with the built-in stereo microphone or an external stereo microphone. You can also freely adjust the sound-recording level. Use [ : Sound rec.] to set sound recording functions. Sound Recording/Sound-Recording Level Auto The sound-recording level is adjusted automatically. Auto level control will take effect automatically in response to the sound level.
Wind Filter Set to [Auto] for automatic reduction of audio distortion in windy outdoor scenes. Only activated when the camera’s built-in microphone is used. When the wind filter function takes effect, part of the low bass sounds will also be reduced. Attenuator This feature suppresses sound distortion caused by loud noises. Set to [Enable] if sound is distorted with [Sound rec.] set to [Auto] or [Manual].
External Microphone If an external microphone equipped with a miniature stereo plug (3.5 mm diameter) is connected to the camera’s external microphone IN terminal, the external microphone will be given the priority. Using a microphone such as Directional Stereo Microphone DM-E1 (sold separately) is recommended. Caution Sounds from Wi-Fi operations may be captured with built-in or external microphones. During sound recording, using the wireless communication function is not recommended.
Video Snapshots Configuring Video Snapshot Settings Creating Video Snapshot Albums Adding to an Existing Album Record a series of short video snapshots, each a few seconds long, and the camera will combine them to create a video snapshot album that shows these highlights of your trip or event. Video snapshots are available when the movie recording size is set to (NTSC) / (PAL). Video snapshot albums can also be played back with background music ( ).
2. Configure [Album settings]. Select [Create a new album]. Read the message and select [OK]. 3. Configure [Playback time]. Specify playback time per video snapshot. 4. Configure [Playback effect]. This setting determines how fast albums are played back.
5. Configure [Show confirm msg]. Select [Enable]. 6. Check the required recording time. The time required to record each video snapshot is indicated (1), based on the playback time and effect. 7. Close the menu. Press the < > button to close the menu. A blue bar is displayed to indicate the recording time (2).
Creating Video Snapshot Albums 1. Record the first video snapshot. Press the movie shooting button to start recording. The blue bar indicating recording time gradually decreases, and after the specified time elapses, recording stops automatically. A confirmation message is displayed ( 2. ). Save as a video snapshot album. Select [ Save as album]. The clip is saved as the first video snapshot in the album.
3. Record your next video snapshots. Repeat step 1 to record the next video snapshot. Select [ Add to album]. To create another album, select [ Save as a new album]. Repeat step 3 as needed. 4. Stop recording video snapshots. Set [Video snapshot] to [Disable]. To return to normal movie recording, be sure to specify [Disable]. Press the < movie recording.
Options in steps 2 and 3 Option Save as album (step 2) Add to album (step 3) Save as a new album (step 3) Description Saves the clip as the first video snapshot in an album. Adds the current video snapshot to the album recorded most recently. Creates a new album and saves the clip as the first video snapshot. This album file is different from the one recorded most recently. Playback video snapshot (steps 2, 3) Plays the video snapshot just recorded.
Adding to an Existing Album 1. Select [Add to existing album]. In step 2 of Configuring Video Snapshot Settings, select [Add to existing album]. 2. Select an existing album. Use the < < >. >< > keys to select an existing album, then press Select [OK]. Some video snapshot settings will be updated to match settings of the existing album. 3. Close the menu. Press the < > button to close the menu. The video snapshot recording screen is displayed.
4. Record a video snapshot. Record the video snapshot, referring to Creating Video Snapshot Albums. Caution You cannot select an album shot with another camera. Caution General video snapshot precautions No sound is recorded when [Playback effect] is set to [1/2x speed] or [2x speed]. Recording time per video snapshot is only approximate. It may differ slightly from the actual recording time indicated during playback, due to the frame rate and other factors.
Time-Lapse Movies Still photos shot at a set interval can be stitched together automatically to create a 4K or Full HD time-lapse movie. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took. It is effective for a fixed-point observation of changing scenery, growing plants, celestial motion, etc. Time-lapse movies are recorded in MP4 format at the following quality: (NTSC)/ (PAL) in 4K recording, and (NTSC)/ (PAL) in Full HD recording.
3. Select a scene. Select a scene to suit the shooting situation. For greater freedom when setting the shooting interval and number of shots manually, select [Custom]. 4. Set the shooting interval. Select [Interval/shots]. Select [Interval] (sec.). Use the < press < >. Refer to [ set it. >< : Time required] (1) and [ > keys to set a value, then : Playback time] (2) as you When [Custom] is set Select [Interval] (min.:sec.). Press < Use the < < >.) > to display < >< >.
5. Set the number of shots. Select [No. of shots]. Use the < press < >. Refer to [ number. : Time required] and [ >< > keys to set a value, then : Playback time] as you set the When [Custom] is set Select the digit. Press < > to display < Use the < < >.) Make sure [ >< >. > keys to set a value, then press < >. (Returns to : Playback time] is not displayed in red. Select [OK] to register the setting.
Note With [Scene *], available intervals and numbers of shots are restricted, to suit the type of scene. For details on cards that can record time-lapse movies, see Card performance requirements (Movie recording). If the number of shots is set to 3600, the time-lapse movie will be approx. 2 min. in NTSC and approx. 2 min. 24 sec. in PAL. 6. Select the desired movie recording size. (3840 × 2160) The movie is recorded in 4K quality. The aspect ratio is 16:9. ) for NTSC and 25.
7. Set [Auto exposure]. Fixed 1st frame When taking the first shot, metering is performed to set the exposure automatically to match the brightness. The exposure setting for the first shot will be applied to subsequent shots. Other shooting-related settings for the first shot will also be applied for subsequent shots. Each frame Metering is also performed for each subsequent shot to set the exposure automatically to match the brightness.
8. Set [Screen auto off]. Disable Even during time-lapse movie recording, the image will be displayed. (The screen turns off only at the time of shooting.) Note that the screen will turn off when approx. 30 min. elapse after the shooting started. Enable Note that the screen will turn off when approx. 10 sec. elapse after the shooting started. Note During time-lapse movie recording, you can press the < button to turn on/off the screen. 9. > Set the beeper. Select [Beep as img taken].
10. Check the settings. (1) Time required Indicates the time required to shoot the set number of shots with the set interval. If it exceeds 24 hours, “*** days” will be displayed. (2) Playback time Indicates the movie recording time (time required to play back the movie) when creating the time-lapse movie in 4K movie or Full HD movie from the still photos taken with the set intervals. 11. Close the menu. Press the < > button to turn off the menu screen.
12. Record the time-lapse movie. Press the < > button and check again the “Time required (1)” and “Interval (2)” displayed on the screen. Press the movie shooting button to start time-lapse movie recording. AF will not work during time-lapse movie recording. “ REC” is displayed in the upper right of the screen as the time-lapse movie is recorded. When the set number of shots are taken, the time-lapse movie recording ends. To cancel recording time-lapse movies, set [Time-lapse] to [Disable].
Caution Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. [ : Time-lapse movie] cannot be set to an option other than [Disable] when the camera is connected to a computer with the interface cable, or when an HDMI cable is connected. Movie Servo AF will not function. If the shutter speed is 1/30 sec.
During time-lapse movie recording, the lens’s Image Stabilizer will not operate. Time-lapse movie recording ends if the power switch is set to < >, and the setting changes to [Disable]. Even if a flash is used, it will not fire. The following operations cancel standby for time-lapse movie recording and switch the setting to [Disable].
Note You can use Wireless Remote Control BR-E1 (sold separately) to start and stop the time-lapse movie recording. Prepare by setting [ : Remote control] to [Enable]. With Wireless Remote Control BR-E1 • First, pair the BR-E1 with the camera ( Camera Status/ Remote Control Setting Recording standby During time-lapse movie recording < ). > (Immediate Release) <2> (2-sec. Delay) As set in the Shutter Button Function for Movies setting < > (Movie Recording) Starts recording Ends recording Approx.
Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie recording. 1. Select [ : Movie Servo AF].
2. Select [Enable]. With [Enable] set • The camera focuses on the subject continuously even when you are not pressing the shutter button halfway. • To keep the focus at a specific position, or if you prefer not to record mechanical sounds from the lens, you can temporarily stop Movie Servo AF by tapping [ ] in the lower left of the screen.
Caution Precautions when set to [Movie Servo AF: Enable] Shooting conditions that make focusing difficult • A fast-moving subject approaching or moving away from the camera. • A subject moving at a close distance to the camera. • When recording with a higher aperture value. • Also see Shooting Conditions That Make Focusing Difficult. Since the lens is driven continuously and the battery power is consumed, the possible movie recording time ( ) will be shortened.
Digital Zoom With the recording size set to [ ]/[ shoot with approx. 3–10× digital zoom. 1. Select [ 2. Select an option. ] (NTSC) or [ ] (PAL), you can : Digital zoom]. Select the amount to zoom, then press < Press the < >. > button to close the menu.
3. Use digital zoom. Press the < > button. The digital zoom bar will appear. Press the < > key to zoom in or press the < > key to zoom out. Pressing the shutter button halfway focuses with [1-point AF] (fixed at center). To cancel digital zoom, select [Disable] in step 2. Caution Using a tripod to prevent camera shake is recommended. Time-lapse movies, Creative filters, Movie digital IS, and Auto level are not available. The maximum ISO speed will be ISO 6400. A magnified view is not available.
Movie Auto Level Auto leveling helps keep movies straight during recording. Caution Set [ Digital IS] in [ : IS (Image Stabilizer) mode] to [Disable]. 1. Select [ 2. Select an option. : Auto level].
Shutter Button Function for Movies You can set the functions performed by pressing the shutter button halfway or completely during movie recording. 1. Select [ : Shutter btn function for movies].
2. Select an option. Half-press Specify the function performed by pressing the shutter button halfway. Fully-press Displayed with the Mode dial set to < >. Specify the function performed by pressing the shutter button completely. With [Fully-press] set to [Start/stop mov rec], you can start/stop movie recording not only with the movie shooting button but also by pressing the shutter button completely. Note If [Half-press] is set to [Meter.+One-Shot AF], it is changed to [Meter.
Movie Self-Timer Movie recording can be started by the self-timer. 1. Select [ 2. Select an option. 3. Record the movie. : Movie self-timer]. After you press the movie shooting button or tap [ ], the camera beeps and displays the number of seconds left before recording. Note To cancel the self-timer, either tap the screen or press < 343 >.
Movie Digital IS The camera’s Movie digital IS feature reduces camera shake as movies are recorded. Movie digital IS can provide effective stabilization even when your lens is not equipped with Image Stabilizer. When using a lens equipped with Image Stabilizer, set the lens’s Image Stabilizer switch to < >. 1. Select [ 2. Select [ : IS (Image Stabilizer) mode]. Digital IS].
3. Select an option. Disable ( ) Image stabilization with Movie digital IS is disabled. Enable ( ) Camera shake will be corrected. The image will be slightly magnified. Enhanced ( ) Compared to when [Enable] is set, stronger camera shake can be corrected. The image will be more magnified. Caution Movie digital IS will not function when the lens’s optical Image Stabilizer switch is set to < >. With a lens whose focal length is longer than 800 mm, Movie digital IS will not function.
Note Combination IS Even more effective correction is possible by recording movies with Movie digital IS and a Combination IS-compatible lens, which will combine optical and digital image stabilization by the lens and camera. For details on lenses compatible with Combination IS, visit the Canon website. “+” is added to the Movie digital IS icon ( ) when a lens compatible with Combination IS is used.
Miniature Effect Movies By blurring image areas outside a selected area, you can record movies with a miniature model effect applied. You can also choose a playback speed before recording to create movies that resemble miniature scenes with people and objects moving in fast motion. Note that sound is not recorded. 1. Select [ ]. Press < >, and on the Quick Control screen, select [ Select [ ], [ ], or [ ] as the playback speed. 347 ].
2. Move the scene frame. Use the scene frame to set an area that will look sharp. To make the scene frame movable (displayed in orange), press the < > button or tap [ ] in the lower right of the screen. To switch between vertical and horizontal scene frame orientation, tap [ ] in the lower left of the screen. To move a horizontal scene frame, press the < move a vertical scene frame, press the < >< >< > keys, and to > keys. To return the scene frame to the center of the screen, tap [ lower left.
4. Record the movie. Press the movie shooting button. Speed and playback time (for a 1-minute movie) Speed Playback Time Approx. 12 sec. Approx. 6 sec. Approx. 3 sec. Caution To make people and objects in the scene move quickly during playback, select ], [ ], or [ ] before recording the movie. Movies will resemble scenes in a [ miniature model. Sound is not recorded.
Other Menu Functions [ 1] [ 2] [ 3] [ 5] [ 6] [ 7] [ 8] [ 9] 350
[ 1] Shooting mode Available options include autoexposure and manual exposure movie recording. [ 2] Exposure comp. Exposure compensation can be adjusted in a range of ±3 stops, in 1/3-stop increments. For details on exposure compensation, see Exposure Compensation. ISO speed settings • ISO speed In [ ] mode, you can set the ISO speed manually. You can also select ISO Auto. • Max for Auto You can set the maximum limit for ISO Auto in movie recording in [ ] mode or in [ ] mode with ISO Auto.
Auto slow shutter You can choose whether to record movies that are brighter than when set to [Disable] by automatically slowing the shutter speed under low light. Available in [ ] recording mode. Applies when the frame rate of the movie recording or . size is • Disable Enables you to record movies with smoother, more natural movement, less affected by subject shake than when set to [Enable]. Note that under low light, movies may be darker than when set to [Enable].
[ 3] White balance For details on white balance, see White Balance Settings. Custom White Balance For details on custom white balance, see [ ] Custom White Balance. WB correction For details on white balance correction, see White Balance Correction. Picture Style For details on Picture Styles, see Picture Style Selection. Lens aberration correction For details on lens aberration correction, see Lens Aberration Correction. [ 5] AF method For details on AF methods, see AF Method.
[ 6] Lens electronic MF For details on lens electronic MF, see Lens Electronic MF. [ 7] Remote control By setting to [Enable], you can start or stop movie recording using Wireless Remote Control BR-E1 (sold separately). First, pair the BR-E1 with the camera ( ). With Wireless Remote Control BR-E1 For normal movie recording, set the release timing/movie shooting switch to < then press the release button. For time-lapse movie recording, see Time-Lapse Movies.
[ 9] Reverse display For details on reverse display, see Reverse Display. VF display format For details on the viewfinder display format, see Viewfinder Display Format. HDMI info disp You can configure information display for image output via an HDMI cable. • With info The image, shooting information, AF points, and other information is shown on the other device via HDMI. Note that the camera screen goes off. Recorded movies are saved to the card.
General Movie Recording Precautions Caution Precautions for movie recording Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. If you record something that has fine detail, moire or false colors may result. White balance may change if the ISO speed or aperture value changes during movie recording when [ ] or [ ] is set.
Recording and image quality If the attached lens has an Image Stabilizer and you set the Image Stabilizer switch to < >, the Image Stabilizer will operate at all times even if you do not press the shutter button halfway. This will consume battery power, and it may reduce the total movie recording time under some shooting conditions. When the Image Stabilizer is not necessary, such as when using a tripod, it is recommended that you set the Image Stabilizer switch to < >.
Note Notes for movie recording Each time you record a movie, a new movie file is created on the card. The movie’s field of view coverage for recording 4K, Full HD, and HD movies is approx. 100%. To enable starting/stopping movie recording by pressing the shutter button completely, set [Fully-press] for [ : Shutter btn function for movies] to [Start/ stop mov rec]. Stereo sound is recorded by the camera’s built-in microphones ( ).
Playback This chapter covers topics related to playback—playing back captured still photos and movies—and introduces menu settings on the playback ([ ]) tab. Caution Normal display or selection on this camera may not be possible for images captured on other cameras, or images from this camera that have been edited or renamed on a computer. Images that cannot be used with playback functions may be displayed.
• AF Point Display • HDMI HDR Output 360
Tab Menus: Playback Playback 1 (1) Protect images (2) Erase images (3) Rotate stills (4) Change mov rotate info (5) Rating Playback 2 (1) Print order (2) Photobook Set-up 361
Playback 3 (1) Creative Assist (2) Creative filters (3) Red-eye correction (4) Resize (5) Cropping (6) Create album Playback 4 (1) Slide show (2) Set image search conditions (3) View from last seen (4) Image jump w/ 362
Playback 5 (1) Playback information display (2) AF point disp.
Image Playback Single-Image Display Shooting Information Display Single-Image Display 1. Switch to playback. Press the < > button. The last image captured or played back is displayed.
2. Browse images. To play back images starting with the most recent, press the < > key. To play back images starting with the first captured image, press the < > key. Each time you press the < > button, the display will change. No information Basic information display Shooting information display 3. Exit image playback. Press the < standby.
Note Lines indicating the image area are shown on RAW images captured with [ img aspect ratio] set to an option other than [3:2] ( ). If the search conditions are set with [ : Set image search conditions] ( the filtered images will be displayed. : Still ), only Shooting Information Display With the shooting information screen displayed ( ), you can press the < > button to change the information displayed at the bottom of the screen.
Index Display (Multiple-Image Display) 1. Switch to the index display. During image playback, press the < > button. The 4-image index display will appear. The selected image is highlighted with an orange frame. Pressing the < > button again switches display from 9 images to 36, and then to 100. Pressing the < > button switches display from 100 images to 36, 9, 4, and then single-image display.
2. Browse images. Press the < >< image selection. >< >< > keys to move the orange frame for Press < > in the index display to display the selected image in the single-image display. Touch Playback The camera features a touch-screen panel that you can touch to control playback. Supported touch operations are like those used with smartphones and similar devices. First, press the < > button to prepare for touch playback.
Jump display Index display Magnified view Note You can also magnify display by double-tapping with one finger.
Magnified Image Display 1. Magnify the image. During image playback, press the < > button. The magnified view will appear. The magnified area position (1) will be displayed in the lower right of the screen. Each press of the < > button magnifies display. Each press of the < > button reduces display. For index display ( ), press the < > button again after the final reduction. To erase the current image, select [Erase images] ( 371 ).
2. Scroll the image. Press the < >< >< >< > keys to scroll around the image. To cancel the magnified view, press the < ].
Movie Playback 1. Switch to playback. Press the < 2. > button. Select a movie. Use the < >< > keys to select a movie to play. In single-image display, the [ the screen indicates a movie. ] icon displayed in the upper left of In index display, perforations at the left edge of a thumbnail indicate a movie. Movies cannot be played back from index display, so press < > to switch to single-image display.
3. In single-image display, press < 4. Select [ >. ]. (1) Speaker The movie will start playing back. You can pause playback and display the movie playback panel by pressing < >. Press it again to resume the playback. Pressing the < > key skips forward approx. 4 sec. during playback. Similarly, pressing the < > key skips back approx. 4 sec. Use the < >< > keys to adjust the volume (even during playback).
Movie playback panel Item Playback Operations Play Pressing < > toggles between playback and stop. Slow motion Adjust the slow motion speed with the < >< > keys. The slow motion speed is indicated in the upper right of the screen. Skip backward Skips backward approx. 4 sec. each time you press < Previous frame Displays the previous frame each time you press < will rewind the movie. Next frame Plays the movie frame-by-frame each time you press < down will fast forward the movie.
Movie playback panel (video snapshot albums and digest movies) Item Playback Operations Play Pressing < > toggles between playback and stop. Slow motion Adjust the slow motion speed with the < >< > keys. The slow motion speed is indicated in the upper right of the screen. Previous clip Displays the first frame of the previous video snapshot. Previous frame Displays the previous frame each time you press < will rewind the movie.
Editing a Movie’s First and Last Scenes 1. In single-image display, press < 2. Select [ >. ]. The movie will start playing back. 3. Press < 4. On the movie playback panel, select [ > to pause the movie. 377 ].
5. Specify the part to be edited out. Select either [ ] (Cut beginning) or [ ] (Cut end). Press the < >< > keys to go back or forward one frame (or video > key to fast forward. snapshot) at a time. Keep holding down the < After deciding which part to edit out, press < >. The portion indicated by a line at the bottom of the screen will remain. 6. Check the edited movie. Select [ ] to play back the edited movie. To change the edited part, go back to step 5.
7. Save. Select [ ] (1). The save screen will appear. To save it as a new file, select [New file], or to save it and overwrite the original movie file, select [Overwrite]. Select [ ] (2) to save a compressed version of the file. 4K movies are converted to Full HD movies before compression. On the confirmation screen, select [OK] to save the edited movie and return to the movie playback screen. Caution Because editing is performed in approx. 1 sec.
Frame Extraction from 4K Movies or 4K Time-Lapse Movies From 4K movies or 4K time-lapse movies, you can select individual frames to save as approx. 8.3 megapixel (3840 × 2160) JPEG still images. This function is called “Frame Grab (4K frame capture)”. 1. Switch to playback. Press the < 2. > button. Select a 4K movie or 4K time-lapse movie. Use the < >< > keys for selection. On the shooting information screen ( movies are indicated by a [ ] icon.
5. Press < > to pause the movie. The movie playback panel will appear. 6. Select a frame to grab. Use the movie playback panel to select the frame to grab as a still image. For movie playback panel instructions, see Movie Playback Panel. 7. Select [ ].
8. Save. Select [OK] to save the current frame as a JPEG still image. 9. Select the image to display. Check the destination folder and image file number. Select [View original movie] or [View extracted still image]. Caution Frame grabbing is not possible with Full HD movies, Full HD time-lapse movies, HD movies, or with 4K movies or 4K time-lapse movies from a different camera.
Digest Movie Editing Individual chapters (clips) recorded in < clips, because they cannot be recovered. 1. Switch to playback. Press the < 2. > mode can be erased. Be careful when erasing > button. Select a digest movie. Use the < >< > keys to select a digest movie. In single-image display, digest movies are labeled with [ the upper left. In index display, press < > to switch to single-image display. 3. In single-image display, press < 4. Select [ ]. Digest movie playback begins. 383 >.
5. Press < > to pause the digest movie. The movie playback panel will appear. 6. Select a clip. Use [ ] or [ 7. Select [ 8. Select [OK]. ] to select a clip. ]. The clip is erased, and the digest movie is overwritten.
Note Video snapshot albums can also be edited. However, albums created with [ : Create album] cannot be edited. For other instructions on using the movie playback panel for digest movies, see Movie Playback Panel (Video Snapshot Albums and Digest Movies).
Playback on a TV Set You can view your shots and movies on a TV by connecting the camera to a TV with a commercially available HDMI cable (not exceeding 2.5 m/8.2 ft., with a Type D terminal on the camera end). If the image does not appear on the TV screen, confirm that [ : Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your television). 1. Connect the HDMI cable to the camera. Insert the cable plug in the < 2. > terminal.
5. Press the < > button. Images are now displayed on the television, with nothing displayed on the camera screen. The images will automatically be displayed at the optimum resolution matching the connected television. Caution Adjust movie sound volume with the television. The sound volume cannot be adjusted with the camera. Before connecting or disconnecting the cable between the camera and television, turn off the camera and television.
Protecting Images Protecting a Single Image Specifying the Range of Images to Protect Protecting All Images in a Folder or on a Card You can protect important images from being accidentally erased. Protecting a Single Image 1. Select [ 2. Select [Select images]. 3. Select an image. : Protect images]. Use the < >< > keys to select an image to protect.
4. Protect the image. Press < with a < > to protect the selected image, after which it will be labeled > icon (1) at the top of the screen. To cancel protection and clear the < > icon, press < To protect another image, repeat steps 3 and 4. 389 > again.
Specifying the Range of Images to Protect While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once. 1. Select [Select range]. Select [Select range] in [ 2. : Protect images]. Specify the range of images. Select the first image (start point). Next, select the last image (end point). The images in the specified range will be protected and the < > icon will appear.
Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ images], all the images in the folder or on the card will be protected. : Protect To cancel protection, select [Unprotect all images in folder] or [Unprotect all images on card]. If the search conditions are set with [ : Set image search conditions] ( display will change to [All found images] and [Unprotect all found].
Erasing Images Erasing Images Individually Selecting ([ ]) Multiple Images to Erase Together Specifying the Range of Images to Erase Erasing All Images in a Folder or on a Card You can either select and erase unnecessary images individually or erase them in one batch. Protected images ( ) will not be erased. Caution Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them.
3. Erase the images. JPEG or RAW images or movies Select [Erase]. RAW+JPEG images Select an option.
Selecting ([ ]) Multiple Images to Erase Together By adding checkmarks to the images to be erased, you can erase all those images at once. 1. Select [ 2. Select [Select and erase images]. 3. Select an image. : Erase images]. Use the < < >. >< > keys to select an image to erase, then press To select another image to be erased, repeat step 3. Press the < > button, then press [OK].
4. Erase the images.
Specifying the Range of Images to Erase While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once. 1. Select [Select range]. 2. Specify the range of images. Select the first image (start point). Next, select the last image (end point). 3. Press the < > button.
4. Erase the images. Select [OK].
Erasing All Images in a Folder or on a Card When you select [All images in folder] or [All images on card] in [ all the images in the folder or on the card will be erased. : Erase images], If the search conditions are set with [ : Set image search conditions] ( display will change to [All found images]. ), the • If you select [All found images], all the images filtered by the search conditions will be erased. Note To erase all the images including protected images, format the card ( 398 ).
Rotating Still Photos You can use this feature to rotate the displayed image to the desired orientation. 1. Select [ 2. Select an image. : Rotate stills]. Use the < 3. >< > keys to select an image to rotate. Rotate the image. Each time you press < 90°→270°→0°. >, the image will rotate clockwise as follows: To rotate another image, repeat steps 2 and 3.
Note If you set [ : Auto rotate] to [On ] ( ) before taking pictures, you need not rotate the image with this function. If the rotated image is not displayed rotated during playback, set [ : Auto rotate] to [On ].
Changing Movie Orientation Information You can manually change movie orientation information (which determines which side is up). 1. Select [ 2. Select a movie. : Change mov rotate info]. Use the < >< > keys to select a movie with orientation information to change.
3. Press < >. As you watch the image orientation icon in the upper left of the screen, press < > to specify which side is up. Note Orientation information of video snapshot albums cannot be changed. Movies are played horizontally on the camera, regardless of the [ : Add rotate info] setting ( ).
Rating Images Rating a Single Image Rating by Specifying the Range Rating All Images in a Folder or on a Card You can rate images on a scale of 1–5 ( / / * Rating images can help you organize them. Rating a Single Image 1. Select [ 2. Select [Select images]. : Rating]. 403 / / ). This function is called rating.
3. Select the image to be rated. Use the < 4. >< > keys to select an image to rate. Rate the image. Press < >, and a blue highlight frame will appear as shown in the screen shown above. Use the < >< > keys to select a rating mark, then press < >. When you append a rating mark to the image, the number beside the set rating will increase by one. To rate another image, repeat steps 3 and 4.
Rating by Specifying the Range While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once. 1. Select [Select range]. 2. Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images. 3. Press the < > button.
4. Rate the image. Turn the < > dial to select a rating mark, then select [OK]. All the images in the specified range will be rated (same rating) at once.
Rating All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. Under [ : Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated. Turn the < > dial to select a rating mark, then select [OK]. When you are not rating images or canceling the rating, select [ ]. If the search conditions are set with [ : Set image search conditions] ( display will change to [All found images].
Note Values next to ratings are displayed as [###] if more than 1,000 images have that rating. With [ : Set image search conditions] and [ : Image jump w/ ], you can display only the images given a specific rating.
Printing All operations in direct printing are performed on the camera, as you view instructions on the camera. 1. Prepare the printer. For details, refer to the printer instruction manual. 2. Connect the camera to the printer with an interface cable (sold separately). As an interface cable, you can use an IFC-600PCU cable (sold separately). Insert the cord’s plug into the camera’s digital terminal (USB Micro-B). Connect the other end to the printer’s USB terminal. 3. Turn the printer on.
4. Turn the camera on. Some printers may beep. The image is displayed, along with a printer connection icon in the upper left of the screen. 5. Select the image to be printed. Confirm that a printer connection icon (1) is displayed in the upper left of the screen. Press the < 6. Press < >< > keys to select an image to print. >. The print setting screen appears. For setting details, see Print Settings. Caution Confirm in advance that the printer has a PictBridge-compatible terminal.
Note The screen display and setting options vary depending on the printer. Also, certain settings may not be available. For details, refer to the printer’s instruction manual. You can also print RAW images captured with this camera. When using a battery to power the camera, make sure it is fully charged. Turn off the camera and printer before disconnecting the cable, and hold the cable by the plug when disconnecting it.
Print Ordering (DPOF) Setting Print Options Selecting Images for Printing DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher. You can set the print settings such as print type, date imprinting, file number imprinting, etc. The print settings will be applied to all the images specified for printing.
3. Set the options as desired. Set [Print type], [Date], and [File No.] options. Print type Date File No. 4. On Off On Off Standard Prints one image on one sheet. Index Multiple thumbnail images are printed on one sheet. Both Prints both the standard and index prints. [On] imprints the recorded date of the captured image. [On] imprints the file number. Exit the setting. Press the < > button. Next, select [Sel.Image] or [Multiple] to specify the images to be printed.
Caution If you print an image with a large image size using the [Index] or [Both] setting ( ), the index print may not be printed with certain printers. In this case, resize the image ( ), then print the index print. Even if [Date] and [File No.] are set to [On], the date or file number may not be printed, depending on the print type setting and printer. With [Index] prints, the [Date] and [File No.] cannot both be set to [On] at the same time.
Selecting Images for Printing Sel.Image Select and specify the images individually. Press the < > button to save the print order to the card. • Standard/Both (1) Quantity (2) Total images selected Press < > to print a copy of the displayed image. By pressing the < keys, you can set a print quantity of up to 99 copies. >< > • Index (3) Checkmark (4) Index icon Press < > to add a checkmark [ index print. ] to the box.
Multiple • Select range Select [Select range] in [Multiple]. Selecting the first and last images of the range marks all the images in the range with a checkmark [ ], and one copy of each image will be specified for printing. • All images in a folder Select [Mark all in folder] and select the folder. A print order for one copy of all the images in the folder will be specified. If you select [Clear all in folder] and select the folder, the print order for all the images in the folder will be canceled.
Caution RAW images or movies cannot be specified for printing. Note that RAW images or movies will not be specified for printing even if you specify all images with [Multiple]. When using a PictBridge-compatible printer, do not specify more than 400 images for one print order. If you specify more than this, the images may not all be printed.
Photobook Set-up Specifying Images Individually Specifying the Image Range for a Photobook Specifying All Images in a Folder or Card You can specify up to 998 images for printing in a photobook. When you use EOS Utility (EOS software) to import images to a computer, the specified images for a photobook will be copied to a dedicated folder. This function is useful for ordering photobooks online. Specifying Images Individually 1. Select [ 2. Select [Select images]. : Photobook Set-up].
3. Select the image to be specified. Use the < >< press < >. > keys to select an image for the photobook, then To select other images to be specified for a photobook, repeat step 3.
Specifying the Image Range for a Photobook While looking at the images in the index display, you can specify the range (start point to end point) of images to be specified for a photobook at once. 1. Select [Multiple]. Select [Multiple] in [ 2. : Photobook Set-up]. Select [Select range].
3. Specify the range of images. Select the first image (start point). Next, select the last image (end point). A checkmark [ ] will be appended to all the images within the range between first and last images.
Specifying All Images in a Folder or Card You can specify all the images in a folder or on a card at once for a photobook. All images in the folder or on the card are specified for the photobook when you select [All images in folder] or [All images on card] in the [Multiple] option for [ : Photobook Set-up]. To cancel the selection, select [Clear all in folder] or [Clear all on card].
Creative Assist You can process RAW images by applying your preferred effects and saving as JPEGs. 1. Select [ 2. Select an image. : Creative Assist]. Use the < >.
3. Select an effect. Use the < >< > keys to select the effect. By selecting [Preset] and pressing < >, you can choose [VIVID], [SOFT], or other preset effects. [AUTO1], [AUTO2], and [AUTO3] are effects recommended by the camera based on image conditions. You can select effects such as [Brightness] or [Contrast] by pressing < > and then using the < >< > keys. Press < > when adjustment is finished.
To reset the effect, press the < To confirm the effect, press the < 4. Select [OK] to save the image. 425 > button. > button.
Creative Filters You can apply the following filter processing to an image and save it as a separate image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect. 1. Select [ 2. Select an image. : Creative filters]. Use the < >< > keys to select an image, then press < To select the image from index display, press the < 3. Select a filter effect ( ). 426 >. > button.
4. Adjust the filter effect. Adjust the filter effect, then press < >. For [Miniature effect], turn the < > dial or use the < >< > keys to move the white frame enclosing the area to keep in sharper focus, then press < >. 5. Save. Select [OK]. Check the destination folder and image file number, then select [OK]. To apply filter processing to other images, repeat steps 2–5.
Creative Filter Characteristics Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness. Fish-eye effect Gives the effect of a fish-eye lens. The image will have barrel distortion. Depending on the level of this filter effect, the area trimmed along the periphery of the image changes.
Red-Eye Correction Automatically corrects relevant portions of images affected by red-eye. The image can be saved as a separate file. 1. Select [ 2. Select an image with the < : Red-eye correction]. >< After image selection, either tap [ > keys. ] or press < >. White frames are displayed around corrected image areas. 3. Select [OK]. The image is saved as a separate file.
Caution Some images may not be corrected accurately.
Resizing You can resize a JPEG image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG / / images. JPEG and RAW images cannot be resized. 1. Select [ 2. Select an image. : Resize]. Use the < >< > keys to select an image to resize.
3. Select the desired image size. Press < > to display the image sizes. Select the desired image size (1). 4. Save. Select [OK] to save the resized image. Check the destination folder and image file number, then select [OK]. To resize another image, repeat steps 2 to 4. Note For details on image sizes of resized images, see Still Photo Pixel Count.
Cropping You can crop a captured JPEG image and save it as another image. Cropping an image is possible only with JPEG images. Images shot in RAW cannot be cropped. 1. Select [ 2. Select an image. : Cropping]. Use the < >< > keys to select an image to crop.
3. Set the cropping frame. Press < > to display the cropping frame. The image area within the cropping frame will be cropped. Resizing the cropping frame size Use the < > or < > button to resize the cropping frame. The smaller the cropping frame, the more magnified the cropped image will look. Changing the cropping frame aspect ratio and orientation Use the < > dial to select < cropping frame’s aspect ratio. >.
4. Check the image area to be cropped. Use the < > dial to select < >. The image area to crop is displayed. 5. Save. Use the < > dial to select < >. Select [OK] to save the cropped image. Check the destination folder and image file number, then select [OK]. To crop another image, repeat steps 2 to 5. Caution The position and size of the cropping frame may change depending on the angle set for tilt correction. Once a cropped image is saved, it cannot be cropped again or resized.
Album Creation You can rearrange, delete, or play back the video snapshots in an album. 1. Select [ 2. Select an album to edit. : Create album]. Press < > to add a checkmark [ After selection, press the < 436 ]. > button.
3. Select an editing option. Option Description Rearrange video snapshots >< Use the < move, then press < 4. >< delete, then press < labeled [ < Play video snapshot >. Use the < move it, then press < Use the < Remove video snapshot > keys to select a video snapshot to >< > keys to >. > keys to select a video snapshot to >. Selected video snapshots are ]. To clear the selection and remove [ Use the < >< play, then press < adjust the volume. > keys to select a video snapshot to >.
5. Save. To play an album with background music, use [Background music] to select the music ( ). To check your editing, select [Preview]. Selecting [Save] saves the edited album as a new album. Caution Video snapshot albums can only be edited once.
Selecting Background Music Albums and slideshows can be played with background music once you copy the music to the card, using EOS Utility (EOS software). 1. Select [Background music]. Set [Background music] to [On]. 2. Select the background music. Use the < >< > keys to select the music, then press < [Slide show], you can select multiple tracks. 3. >. For Listen to a sample. To listen to a sample, press the < > button. Use the < >< > keys to adjust the volume.
Slideshows You can play back the images on the card as an automatic slideshow. 1. Specify the images to be played back. To play back all the images on the card, go to step 2. If you want to specify the images to be played back in the slideshow, filter the images with [ : Set image search conditions] ( ). 2. Select [ : Slide show].
3. Set the playback as desired. Select [Set up]. Set the [Display time], [Repeat] (repeated playback), and [Transition effect] (effect when changing images) settings for the still photos. To play background music, use [Background music] to select the music ( ). After completing the settings, press the < Display time Repeat 441 > button.
Transition effect Background music 4. Start the slideshow. Select [Start]. After [Loading image...] is displayed, the slideshow will start. 5. Exit the slideshow. To exit the slideshow and return to the setting screen, press the < > button.
Note To pause the slideshow, press < >. During pause, [ ] will be displayed in the upper left of the screen. Press < > again to resume the slideshow. During the automatic playback of still photos, you can press the < > button to switch the display format ( ). Volume during movie playback can be adjusted with the < >< > keys. During auto playback or when playback is paused, you can press the < >< > keys to view other images. During auto playback, auto power off will not take effect.
Setting Image Search Conditions You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, play a slideshow, erase, and apply other operations to filtered images. 1. Select [ : Set image search conditions].
2. Set the search conditions. Use the < >< Set with the < > keys to select an option. >< > keys or the < > button. A checkmark [ ] (1) is appended to the left of the option. (Specified as the search condition.) If you select the option and press the < > button, the checkmark [ ] will be removed (which cancels the search condition). Option Description Rating Displays images with the selected (rating) condition. Date Displays images taken on the selected shooting date.
4. Display the found images. Press the < > button. Only the images that match the set conditions (filtered) will be played back. When the images are filtered for display, the screen will have an outer yellow frame (2). Clearing the Search Conditions Access the screen in step 2, then press the < > button to clear all the search conditions. Caution If no images match the search conditions, < > cannot be pressed in step 3.
Resuming from Previous Playback 1. Select [ 2. Select an option. : View from last seen]. [Enable]: Playback resumes from the last image displayed (unless you have just finished shooting). [Disable]: Playback resumes from your most recent shot whenever the camera is restarted.
Browsing Images with the Dial In single-image display, you can turn the < > dial to jump through the images forward or backward according to the jump method set. 1. Select [ 2. Select the jump method. : Image jump w/ ]. Note With [Jump images by the specified number], you can turn the < > dial to select the number of images to jump by. With [Display by image rating], turn the < the rating ( ). If you browse images with [ rated images will be displayed.
3. Browse by jumping. (1) Jump method (2) Playback position Press the < > button. In single-image display, turn the < > dial. You can browse by the jump method set. Note To search images by shooting date, select [ : Display by date]. To search images by folder, select [ : Display by folder]. If the card contains both movies and still photos, select [ : Display movies only] or [ : Display stills only] to display only one or the other.
Playback Information Display You can specify screens and accompanying information displayed during image playback. 1. Select [ 2. Add a checkmark [ : Playback information display]. ] next to the number of screens to display. Use the < >< > keys to select numbers, then press < a checkmark [ ]. Repeat these steps to add a checkmark [ screen to display, then select [OK]. ] to the number of each Your selected information can be accessed by pressing the < button during playback.
Histogram The brightness histogram shows the exposure level distribution and overall brightness. The RGB histogram is for checking the color saturation and gradation. [Brightness] display This histogram is a graph showing the distribution of the image’s brightness level, with the horizontal axis indicating the brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each brightness level.
[RGB] display This histogram is a graph showing the distribution of each primary color’s brightness level in the image (RGB or red, green, and blue), with the horizontal axis indicating the color’s brightness level (darker on the left and brighter on the right) and the vertical axis indicating the pixel count at each color brightness level. The more pixels there are toward the left, the darker and less prominent the color, and the more pixels there are toward the right, the brighter and denser the color.
AF Point Display You can display the AF points that were used to focus, which will be outlined in red on the playback screen. If automatic AF point selection is set, multiple AF points may be displayed. 1. Select [ 2. Select [Enable]. : AF point disp.].
HDMI HDR Output You can view RAW images in HDR by connecting the camera to an HDR TV. 1. Select [ 2. Select [On]. : HDMI HDR output]. Note Make sure the HDR TV is set up for HDR input. For details on how to switch inputs on the TV, refer to the TV manual. Depending on the TV used, images may not look as expected. Some image effects and information may not be displayed on an HDR TV.
Wireless Features This chapter describes how to connect the camera to a smartphone wirelessly via Bluetooth® or Wi-Fi® and send images to devices or Web services, how to control the camera from a computer or wireless remote control, and other operations. Caution Important Note that Canon cannot be held liable for any loss or damage caused by erroneous wireless communication settings when using the camera. In addition, Canon cannot be held liable for any other loss or damage caused by use of the camera.
• Wireless Communication Status 456
Tab Menus: Wireless Settings Wireless Settings 1 (1) Wi-Fi/Bluetooth connection (2) Airplane mode (3) Wi-Fi settings (4) Bluetooth settings (5) Nickname (6) GPS settings Wireless Settings 2 (1) Reset communication settings 457
Caution Wireless communication is not available while the camera is connected via an interface cable to a computer or other device. Other devices, such as computers, cannot be used with the camera by connecting them with an interface cable while the camera is connected to devices via Wi-Fi. The camera cannot be connected via Wi-Fi if there is no card in the camera (except for [ ]). Also, for [ ] and Web services, the camera cannot be connected via Wi-Fi if there are no images saved on the card.
Wi-Fi/Bluetooth Connection 1. Select [ 2. Select an option for the camera to connect to. : Wi-Fi/Bluetooth connection]. Connect to smartphone ( ) Control the camera remotely and browse images on the camera over a Wi-Fi connection by using the dedicated Camera Connect app on smartphones or tablets (collectively referred to as “smartphones” in this manual).
Upload to Web service ( ) Images can be sent directly from the camera to the image.canon cloud service for Canon customers after you complete member registration (free of charge). Original files of images sent to image.canon are retained for 30 days, without storage limitations, and can be downloaded to computers or transferred to other Web services.
Connecting to a Smartphone Turning on Bluetooth and Wi-Fi on a Smartphone Installing Camera Connect on a Smartphone Connecting to a Bluetooth-Compatible Smartphone via Wi-Fi Camera Connect Functions Maintaining a Wi-Fi Connection When the Camera Is Off Canceling the Pairing Wi-Fi Connection without Using Bluetooth Automatic Image Transfer as You Shoot Sending Images to a Smartphone from the Camera Terminating Wi-Fi Connections Settings to Make Images Viewable from Smartphones You can do the following after
Turning on Bluetooth and Wi-Fi on a Smartphone Turn on Bluetooth and Wi-Fi from the smartphone settings screen. Note that pairing with the camera is not possible from the smartphone’s Bluetooth settings screen. Note To establish a Wi-Fi connection via an access point, see Wi-Fi Connection via Access Points.
Installing Camera Connect on a Smartphone The dedicated app Camera Connect (free of charge) must be installed on the smartphone on which Android or iOS is installed. Use the latest version of the smartphone OS. Camera Connect can be installed from Google Play or App Store. Google Play or App Store can also be accessed using the QR codes that appear when the camera is paired or connected via Wi-Fi to a smartphone.
Connecting to a Bluetooth-Compatible Smartphone via Wi-Fi Steps on the camera (1) 1. Select [ 2. Select [ Connect to smartphone]. 3. Select [Add a device to connect to]. : Wi-Fi/Bluetooth connection].
4. Select an option. If Camera Connect is already installed, select [Do not display]. If Camera Connect is not installed, select [Android] or [iOS], scan the displayed QR code with the smartphone to access Google Play or App Store and install Camera Connect.
5. Select [Pair via Bluetooth]. Press < > to start pairing. To pair with a different smartphone after pairing with one initially, select [OK] on the screen shown above.
Steps on the smartphone (1) 6. Start Camera Connect. 7. Tap the camera for pairing. In Android, go to Steps on the camera (2). 8. Tap [Pair] (iOS only).
Steps on the camera (2) 9. 10. Select [OK]. Press the < > button. Pairing is now complete, and the camera is connected to the smartphone via Bluetooth. A Bluetooth icon appears on the main Camera Connect screen.
Caution The camera cannot be connected to two or more devices at the same time via Bluetooth. To switch to a different smartphone for the Bluetooth connection, see Changing or Deleting Connection Settings. Bluetooth connection consumes battery power even after the camera’s auto power off is activated. Therefore, the battery level may be low when you use the camera. Troubleshooting pairing Keeping pairing records for previously paired cameras on your smartphone will prevent it from pairing with this camera.
Steps on the smartphone (2) 11. Tap a Camera Connect function. In iOS, tap [Join] when a message is displayed to confirm camera connection. For the Camera Connect functions, see Camera Connect Functions. When a Wi-Fi connection is established, the screen for the selected function will appear. [ Wi-Fi on] is displayed on the camera screen. The Bluetooth and Wi-Fi icons are lit on the main Camera Connect screen. The Wi-Fi connection to a Bluetooth-compatible smartphone is now complete.
[ Wi-Fi on] screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error.
Camera Connect Functions Images on camera Images can be browsed, deleted, or rated. Images can be saved on a smartphone. Effects can be applied to RAW images from a smartphone (Creative Assist). Remote live view shooting Enables remote shooting as you view a live image on the smartphone. Auto transfer Enables camera and app setting adjustment for automatic transfer of your shots ( ). Bluetooth remote controller Enables remote control of the camera from a smartphone paired via Bluetooth.
Maintaining a Wi-Fi Connection When the Camera Is Off Even when the camera power switch is set to < >, as long as it is paired to a smartphone via Bluetooth, you can use the smartphone to connect via Wi-Fi and browse images on the camera or perform other operations. If you prefer not to connect via Wi-Fi to the camera when it is off, either set [Airplane mode] to [On] or set [Bluetooth settings] to [Disable].
Canceling the Pairing Cancel pairing with a smartphone as follows. 1. Select [ 2. Select [ Connect to smartphone]. : Wi-Fi/Bluetooth connection]. If the history ( the screen. 3. ) is displayed, press the < Select [Edit/delete device].
4. Select the smartphone to cancel pairing with. Smartphones currently paired with the camera are labeled [ ]. 5. Select [Delete connection information]. 6. Select [OK]. 7. Clear the camera information on the smartphone. In the smartphone’s Bluetooth setting menu, clear the camera information registered on the smartphone.
Wi-Fi Connection without Using Bluetooth Steps on the camera (1) 1. Select [ 2. Select [ Connect to smartphone]. : Wi-Fi/Bluetooth connection]. If the history ( the screen. 3. ) is displayed, press the < Select [Add a device to connect to].
4. Select an option. If Camera Connect is already installed, select [Do not display]. 5. Select [Connect via Wi-Fi]. 6. Check the SSID (network name) and password. Check the SSID (1) and Password (2) displayed on the camera screen. No password is displayed or required if you set [Password] to [None] in [Wi-Fi settings] ( ).
Note By selecting [Switch network] in step 6, you can establish a Wi-Fi connection via an access point ( ).
Steps on the smartphone 7. Operate the smartphone to establish a Wi-Fi connection. Smartphone’s screen (sample) Activate the smartphone’s Wi-Fi function, then tap the SSID (network name) checked in step 6 in Steps on the camera (1). For the password, enter the password checked in step 6 in Steps on the camera (1). 8. Start Camera Connect and tap the camera to connect to via Wi-Fi.
Steps on the camera (2) 9. Select [OK]. To specify viewable images, press the < > button. Configure as described in Settings to Make Images Viewable from Smartphones, starting in step 5. The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete. Operate the camera using Camera Connect ( ). For how to terminate the Wi-Fi connection, see Terminating Wi-Fi Connections. To reconnect via Wi-Fi, see Reconnecting via Wi-Fi.
Automatic Image Transfer as You Shoot Your shots can be automatically sent to a smartphone. Before following these steps, make sure the camera and smartphone are connected via Wi-Fi. 1. Select [ 2. Select [Send to smartphone after shot]. 3. Set [Auto send] to [Enable]. : Wi-Fi settings].
4. Set [Size to send]. 5. Take the picture.
Sending Images to a Smartphone from the Camera You can use the camera to send images to a smartphone paired via Bluetooth (Android devices only) or connected via Wi-Fi. 1. Switch to playback. 2. Press the < 3. Select [ > button. Send images to smartphone]. If you perform this step while connected via Bluetooth, a message is displayed, and the connection switches to a Wi-Fi connection. 4. Select sending options and send the images.
(1) Sending images individually 1. Select an image to send. Use the < then press < > dial or < >. >< > keys to select an image to send, To select the image from index display, press the < 2. > button. Select [Send img shown]. In [Size to send], you can select the image sending size. When sending movies, you can select the image quality of movies to send in [Quality to send].
(2) Sending multiple selected images 1. Press < 2. Select [Send selected]. >.
3. Select images to send. Use the < then press < > dial or < >. >< > keys to select an image to send, You can press the < > button to select the images from 3-image display. To return to the single-image display, press the < > button. After selecting the images to send, press the < 486 > button.
4. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. 5. Select [Send].
(3) Sending a specified range of images 1. Press < 2. Select [Send range]. 3. Specify the range of images. >. Select the first image (start point). Select the last image (end point). To cancel the selection, repeat this step. You can press the < > button to change the number of images shown in the index display.
4. Confirm the range. Press the < 5. > button. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. 6. Select [Send].
(4) Sending all images on the card 1. Press < 2. Select [Send all card]. >.
3. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. 4. Select [Send].
(5) Sending images that match the search conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For details on [Set image search conditions], see Setting Image Search Conditions. 1. Press < 2. Select [Send all found]. >.
3. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. 4. Select [Send].
Ending image transfer Sending images from the camera when paired via Bluetooth (Android devices only) Press the < > button on the image transfer screen. Select [OK] to end image transfer and the Wi-Fi connection. Sending images from the camera over a Wi-Fi connection Press the < > button on the image transfer screen. To terminate the Wi-Fi connection, see Terminating Wi-Fi Connections.
Note You can cancel the image transfer by selecting [Cancel] during the transfer. You can select up to 999 files at a time. With a Wi-Fi connection established, disabling the smartphone’s power saving function is recommended. Selecting the reduced size for still photos applies to all still photos sent at that time. Note that size still photos are not reduced. Selecting compression for movies applies to all movies sent at that time. Note that and movies are not reduced.
Terminating Wi-Fi Connections Perform either of the following operations. On the Camera Connect screen, tap [ ]. On the [ Wi-Fi on] screen, select [Disconnect,exit]. If the [ Wi-Fi on] screen is not displayed, select [ : Wi-Fi/Bluetooth connection]. Select [Disconnect,exit], then select [OK] on the confirmation screen.
Settings to Make Images Viewable from Smartphones Images can be specified after the Wi-Fi connection is terminated. 1. Select [ 2. Select [ Connect to smartphone]. : Wi-Fi/Bluetooth connection]. If the history ( the screen. 3. ) is displayed, press the < Select [Edit/delete device].
4. Select a smartphone. Select the name of the smartphone on which you want to make the images viewable. 5. Select [Viewable imgs].
6. Select an option. Select [OK] to access the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shooting-date basis. Images shot up to nine days ago can be specified. When [Images shot in past days] is selected, images shot up to the specified number of days before the current date become viewable. Press the < >< > keys to specify the number of days, then press < > to confirm the selection.
[Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. Once you select the type of rating, the viewable images are set. [File number range] (Select range) Select the first and last images from images arranged by the file number to specify the viewable images. 1.Press < > to display the image selection screen. To select images, use the < > dial or < >< > keys. To select the image from index display, press the < > button. 2.
Caution If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. • Any movie recording in progress in movie recording mode will continue. • Any movie recording in progress in still photo shooting mode will end. With a Wi-Fi connection to a smartphone established, certain functions are unavailable. In remote shooting, the AF speed may become slower. Depending on the communication status, image display or shutter release timing may be delayed.
Connecting to a Computer via Wi-Fi Operating the Camera Using EOS Utility Sending Images on the Camera Automatically This section describes how to connect the camera to a computer via Wi-Fi and perform camera operations using EOS software or other dedicated software. Install the latest version of software on the computer before setting up a Wi-Fi connection. For computer operating instructions, refer to the computer user manual.
2. Select [ Remote control (EOS Utility)]. If the history ( screens. ) is displayed, press the < >< 3. Select [Add a device to connect to]. 4. Check the SSID (network name) and password. > keys to switch Check the SSID (1) and Password (2) displayed on the camera screen. No password is displayed or required if you set [Password] to [None] in [Wi-Fi settings]. For details, see Wi-Fi Settings.
Steps on the computer (1) 5. Select the SSID, then enter the password. Computer’s screen (sample) On the computer’s network setting screen, select the SSID checked in step 4 in Steps on the camera (1). For the password, enter the password checked in step 4 in Steps on the camera (1).
Steps on the camera (2) 6. Select [OK]. The following message is displayed. “******” represents the last six digits of the MAC address of the camera to be connected.
Steps on the computer (2) 7. Start EOS Utility. 8. In EOS Utility, click [Pairing over Wi-Fi/LAN]. If a firewall-related message is displayed, select [Yes]. 9. Click [Connect]. Select the camera to connect to, then click [Connect].
Steps on the camera (3) 10. Establish a Wi-Fi connection. Select [OK].
[ Wi-Fi on] screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error. The Wi-Fi connection to a computer is now complete. Operate the camera using EOS Utility on the computer. To reconnect via Wi-Fi, see Reconnecting via Wi-Fi. Caution If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur.
Sending Images on the Camera Automatically With the dedicated software Image Transfer Utility 2, you can send images on the camera to a computer automatically. Steps on the computer (1) 1. Connect the computer and access point and start Image Transfer Utility 2. The screen to set up pairing is shown when you follow the instructions displayed the first time Image Transfer Utility 2 starts up. Steps on the camera (1) 2. Select [Auto send images to computer]. Select [ : Wi-Fi settings].
4. Select [OK]. 5. Connect to an access point via Wi-Fi. Establish a Wi-Fi connection between the camera and the access point connected to the computer. For connection instructions, see Wi-Fi Connection via Access Points. 6. Select the computer to pair the camera with.
Steps on the computer (2) 7. Pair the camera and computer. Select the camera, then click [Pairing]. Steps on the camera (2) 8. Select [OK]. 9. Select [Image sending options].
10. Select what to send. If you select [Selected imgs] in [Range to send], specify the images to send on the [Select images to send] screen. After the settings are complete, turn the camera off. Images on the camera are automatically sent to the active computer when you turn the camera on within range of the access point. Caution If images are not sent automatically, try restarting the camera.
Connecting to a Printer via Wi-Fi Image Printing Print Settings This section describes how to print images by directly connecting the camera to a printer supporting PictBridge (Wireless LAN) via Wi-Fi. For printer operating instructions, refer to the printer user manual. 1. Select [ : Wi-Fi/Bluetooth connection]. 2. Select [ Print from Wi-Fi printer]. If the history ( screens.
3. Select [Add a device to connect to]. 4. Check the SSID (network name) and password. Check the SSID (1) and Password (2) displayed on the camera screen. No password is displayed or required if you set [Password] to [None] in [Wi-Fi settings] ( ). 5. Set up the printer. In the Wi-Fi settings menu of the printer to be used, select the SSID you have checked. For the password, enter the password checked in step 4.
6. Select the printer. In the list of detected printers, select the printer to connect to via Wi-Fi. If your preferred printer is not listed, selecting [Search again] may enable the camera to find and display it. Note To establish a Wi-Fi connection via an access point, see Wi-Fi Connection via Access Points.
Image Printing Printing images individually 1. Select the image to be printed. Use the < then press < > dial or < >. >< > keys to select an image to print, To select the image from index display, press the < 2. Select [Print image]. 516 > button.
3. Print the image. For the print setting procedures, see Print Settings. Select [Print], then [OK] to start printing.
Printing according to specified image options 1. Press < 2. Select [Print order]. 3. Set the printing options. >. For the print setting procedures, see Print Ordering (DPOF). If the print order is complete before establishing a Wi-Fi connection, go to step 4.
4. Select [Print]. [Print] can be selected only when an image is selected and the printer is ready to print. 5. Configure [Paper settings] ( 6. Print the image. ). When [OK] is selected, printing starts. Caution Shooting is not possible while connected to a printer via Wi-Fi. Movies cannot be printed. Before printing, be sure to set the paper size. File number printing may not be supported by certain printers. Dates may be printed on the border by certain printers when [Bordered] is set.
Note When you use a battery to power the camera, make sure it is fully charged. It may take some time until printing starts after you select [Print], depending on file size and image quality. To stop printing, press < > while [Cancel] is displayed, then select [OK]. When printing with [Print order], you can select [Resume] to continue printing the remaining images if you have stopped printing in progress. Note that printing will not resume if any of the following occurs.
Print Settings The screen display and setting options vary depending on the printer. Also, certain settings may not be available. For details, refer to the printer’s instruction manual. Print settings screen (1) Sets date or file number printing ( (2) Sets the printing effects ( ). ). (3) Sets the number of copies to print ( (4) Sets the print area ( ). ). (5) Sets the paper size, type, and layout ( (6) Returns to the image selection screen. (7) Starts the printing.
Paper settings Select [Paper settings]. [ ] Setting the paper size Select the size of the paper in the printer.
[ ] Setting the paper type Select the type of the paper in the printer. [ ] Setting the page layout Select the page layout. Caution If the image’s aspect ratio is different from the printing paper’s aspect ratio, the image may be cropped significantly when you print it as a borderless print. Images may also be printed at lower resolution. [ ] Setting printing of the date/file number Select [ ]. Select what to print.
[ ] Setting printing effects (image optimization) Select [ ]. Select printing effects. Caution ISO speeds may be misidentified in shooting information printed for images shot at an expanded ISO speed (H). [Default] in printing effects and other options refers to default settings determined by the printer manufacturer. For [Default] details, refer to the printer instruction manual. [ ] Setting the number of copies Select [ ]. Select the number of copies to print.
Cropping the image Set cropping immediately before printing. Changing other print settings after you crop images may require you to crop the images again. 1. Select [Cropping] on the print setting screen. 2. Set the cropping frame size, position, and aspect ratio. The image area within the cropping frame will be printed. The shape of the frame (aspect ratio) can be changed in [Paper settings]. Resizing the cropping frame size Press the < > or < > button to resize the cropping frame.
Caution Depending on the printer, the cropped image area may not be printed as you specified. The smaller the cropping frame, the lower the resolution at which images are printed. Note Handling printer errors If printing does not resume after you resolve a printer error (such as no ink or paper) and select [Continue], use buttons on the printer. For details on resuming printing, refer to the printer’s instruction manual.
Sending Images to a Web Service Registering Image.Canon Sending Images This section describes how to send images to image.canon. Registering Image.Canon Link the camera to image.canon to send images directly from the camera. A computer or smartphone with a browser and internet connection is required. You will need to enter an email address used on your computer or smartphone. For instructions on how to use image.canon services and details on countries and regions where it is available, visit the image.
3. Select [I Agree]. 4. Establish a Wi-Fi connection. Connect to an access point via Wi-Fi. Go to step 6 in Wi-Fi Connection via Access Points. 5. Enter your email address. Enter your email address, then select [OK].
6. Enter a four-digit number. Enter a four-digit number of your choice, then select [OK]. 7. Select [OK]. The [ ] icon changes to [ 529 ].
Steps on the computer or smartphone 8. Set up camera web link. Access the page in the notification message. Follow the instructions to complete the settings on the camera web link settings page.
Steps on the camera (2) 9. Add “image.canon” as a destination. Select [ ]. image.canon is now added.
Sending Images Images can be sent to image.canon. Original files of images sent to image.canon are retained for 30 days, without storage limitations, and can be downloaded to computers or transferred to other Web services. Connecting to image.canon via Wi-Fi 1. Select [ 2. Select image.canon. : Wi-Fi/Bluetooth connection]. If the history ( screens.
Sending images individually 1. Select an image to send. Use the < then press < > dial or < >. >< > keys to select an image to send, To select the image from index display, press the < 2. > button. Select [Send img shown]. In [Size to send], you can select the image sending size. On the screen after images are sent, select [OK] to end the Wi-Fi connection.
Sending multiple selected images 1. Press < 2. Select [Send selected]. 3. Select images to send. >. Use the < then press < > dial or < >. >< > keys to select an image to send, You can press the < > button to select the image from 3-image display. To return to the single-image display, press the < > button.
4. Select [Size to send]. On the displayed screen, select an image size. 5. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection.
Sending a specified range of images Specify the range of images to send all the images in the range at once. 1. Press < 2. Select [Send range]. 3. Specify the range of images. >. Select the first image (start point). Select the last image (end point). Images will be selected and [ ] will appear. To cancel the selection, repeat this step. You can press the < > button to change the number of images shown in the index display.
4. Confirm the range. Press the < 5. > button. Select [Size to send]. On the displayed screen, select an image size. 6. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection.
Sending all images on the card 1. Press < 2. Select [Send all card]. >.
3. Select [Size to send]. On the displayed screen, select an image size. 4. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection.
Sending images that match the search conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For details on [Set image search conditions], see Setting Image Search Conditions. 1. Press < 2. Select [Send all found]. >.
3. Select [Size to send]. On the displayed screen, select an image size. 4. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection. Caution Shooting is not possible when connected via Wi-Fi to image.canon, even if you press the camera’s shutter button.
Note It may not be possible to send certain images with [Send range], [Send all card], or [Send all found]. When you reduce the image size, all images to be sent at the same time are resized. Note that movies or size still photos are not reduced. [Reduced] only applies to still photos shot with cameras of the same model as this one. Still photos shot with other models are sent without resizing. A record of sent images can be checked when you access image.canon.
Streaming Images Preparing to Stream Live Streaming You can live-stream images from the camera. Only when streaming, you can use Wireless Remote Control BR-E1 (sold separately). Note that before streaming, you will need to pair the camera with Wireless Remote Control BR-E1 ( ). Caution Check the YouTube streaming requirements in advance on the YouTube site. Preparing to Stream Set up [Live streaming] on the camera to enable streaming from the camera. Register the camera for image.
Steps on the camera 2. Select [ ]. A [Live streaming] icon is added.
Caution Streaming YouTube is the only streaming service supported by this camera. Before you can use streaming services, you must complete image.canon registration. YouTube streaming is subject to change, suspension, or termination without prior notice. Canon is in no way responsible for third-party services such as YouTube streaming. No image is recorded to the card during streaming (but a card must be in the camera). Images are streamed at approx. 6 Mbps for either (NTSC) or (PAL).
Live Streaming You can also stream by using the camera to select an event that you have set up in advance on the YouTube site (by entering the streaming time and title). 1. Complete event settings on the YouTube site. For instructions, visit the YouTube site. 2. Set the Mode dial to < >. You can select the movie recording mode ([Movie auto exposure] or > → [Shooting mode]). [Movie manual exp.], which can be set in < 3. Start streaming. Press the < > button, then select [Live streaming].
4. Check the terms of service. Read the agreement displayed and choose [I Agree]. 5. Select an event. Select an event that you have added from the YouTube site in advance. Up to 20 events are listed. Note In case of messages indicating that streaming cannot be started, the event has not been registered yet. Add the event from the YouTube site.
6. Check the streaming details. Select [OK]. 7. Select [OK]. 8. Select [PRVW] or [LIVE]. Selecting [PRVW] (Preview) enables you to test streaming without releasing images publicly. Useful for checking images before streaming. Selecting [LIVE] (Live) enables you to start streaming immediately.
9. Start previewing or streaming. Configure recording features, just as in normal movie recording. When ready, press the movie shooting button. Previewing or streaming starts automatically after [Preparing preview] or [Preparing to stream] is displayed. [ PRVW] or [ LIVE] is displayed in the upper right during previewing or streaming, respectively. The time that has elapsed since you pressed the movie shooting button is shown on the previewing/streaming screen (1).
11. Exit streaming mode. Press the < > button, then select [OK]. Caution It will take a moment before streaming begins in step 9. Do not operate the camera while the message is displayed. In case of display problems (character corruption) on the camera for text you entered on the YouTube site, enter the text again from the YouTube site in ASCII format (single-byte letters or numbers).
Wi-Fi Connection via Access Points Camera Access Point Mode Manual IP Address Setup This section describes how to join a Wi-Fi network via an access point compatible with WPS (PBC mode). First, check the position of the WPS button and how long to press it. It may take approx. 1 min. to establish a Wi-Fi connection. 1. Select [ 2. Select an option. : Wi-Fi/Bluetooth connection]. If the history ( screens.
3. Select [Add a device to connect to]. The following message is displayed if you have selected [ Connect to smartphone]. If Camera Connect is already installed, select [Do not display]. On the [Connect to smartphone] screen displayed next, select [Connect via Wi-Fi]. 4. Select [Switch network]. Displayed when [ ], [ ], or [ 552 ] is selected.
5. Select [Connect with WPS]. Note For [Camera access point mode] displayed in step 5, see Camera Access Point Mode. 6. Select [WPS (PBC mode)]. Select [OK].
7. Connect to the access point via Wi-Fi. Press the access point’s WPS button. Select [OK]. 8. Select [Auto setting]. Select [OK] to access the setting screen for the Wi-Fi function. If an error occurs with [Auto setting], see Manual IP Address Setup.
9. Specify the settings for the Wi-Fi function. [ Connect to smartphone] On the smartphone’s Wi-Fi setting screen, tap the SSID (network name) shown on the camera, then enter the password of the access point for the connection. Go to step 8 in Wi-Fi Connection without Using Bluetooth. [ Remote control (EOS Utility)] Go to step 7 or 8 in Steps on the computer (2). [ Print from Wi-Fi printer] Go to step 6 in Connecting to a Printer via Wi-Fi. Register image.canon. Go to step 5 in Registering Image.
Camera Access Point Mode Camera access point mode is a connection mode for connecting the camera directly to each device via Wi-Fi. Displayed when [ ], [ ], or [ ] is selected after [ : Wi-Fi/Bluetooth connection].
Manual IP Address Setup The options displayed vary depending on the Wi-Fi function. 1. Select [Manual setting]. Select [OK]. 2. Select an option. Select an option to access the screen for numerical input. To use a gateway, select [Enable], then select [Address].
3. Enter the desired values. Turn the < > dial to move the input position in the upper area, and use the < >< > keys to select numbers to enter. Press < > to enter the selected number. To delete the number just entered, press the < > button. Select [OK] after the numbers have been entered. Display returns to the screen in step 2. 4. Select [OK]. When you have completed setting the necessary items, select [OK].
Connecting to a Wireless Remote Control This camera can also be connected to Wireless Remote Control BR-E1 (sold separately, via Bluetooth for remote control shooting. 1. Select [ : Wi-Fi/Bluetooth connection]. 2. Select [ Connect to Wireless Remote]. 3. Select [Add a device to connect to].
4. Pair the devices. When the [Pairing] screen appears, press and hold the and buttons on the BR-E1 simultaneously for at least 3 sec. After a message confirms that the camera is paired with the BR-E1, press < >. 5. Set up the camera for remote shooting. When shooting still photos, select [ For movie recording, set [ ] or [ ] as the drive mode ( : Remote control] to [Enable]. For instructions after the pairing is complete, refer to the BR-E1’s Instruction Manual.
Canceling the Pairing Before pairing with a different BR-E1, clear the information about the connected remote control. 1. Select [ : Wi-Fi/Bluetooth connection]. 2. Select [ Connect to Wireless Remote]. 3. Select [Delete connection information].
4. Select [OK].
Reconnecting via Wi-Fi Follow these steps to reconnect to devices or Web services with registered connection settings. 1. Select [ 2. Select an option. : Wi-Fi/Bluetooth connection]. Select an option to connect to via Wi-Fi from the displayed history. If the option is not shown, press the < >< > keys to switch screens. The history is not displayed when [Connection history] is set to [Hide] ( ).
3. Operate the connected device. [ ] Smartphone Start Camera Connect. If the smartphone’s connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera. When directly connecting the camera to a smartphone via Wi-Fi, “_Canon0A” is displayed at the end of the SSID. [ ] Computer On the computer, start the EOS software.
Registering Multiple Connection Settings You can register up to 10 connection settings for the wireless communication functions. 1. Select [ 2. Select an option. : Wi-Fi/Bluetooth connection]. If the history ( keys. ) is displayed, switch screens with the < >< > For details on [ Connect to smartphone], see Connecting to a Smartphone. For details on [ Remote control (EOS Utility)], see Connecting to a Computer via Wi-Fi.
Airplane Mode You can temporarily disable Wi-Fi and Bluetooth functions. 1. Select [ 2. Set to [On]. [ : Airplane mode]. ] is displayed on the screen. Note [ ] may not be displayed in still photo shooting, movie recording, or playback, depending on display settings. If it is not displayed, press the < > button repeatedly to access detailed information display.
Wi-Fi Settings 1. Select [ : Wi-Fi settings].
2. Select an option. Wi-Fi When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable]. Password Set to [None] to allow Wi-Fi connections without a password (except when connecting to an access point via Wi-Fi). Connection history You can set the connection history for devices connected via Wi-Fi to [Show] or [Hide].
Bluetooth Settings 1. Select [ 2. Select an option. : Bluetooth settings]. Bluetooth If you will not use the Bluetooth function, select [Disable]. Check connection information You can check the name and communication status of the paired device. Bluetooth address You can check the camera’s Bluetooth address.
Nickname You can change the camera nickname (displayed on smartphones and other cameras) as needed. 1. Select [ 2. Enter text using the Virtual Keyboard Operations. : Nickname]. When you finish entering characters, press the < 570 > button.
GPS Settings GPS via Mobile GPS Connection Display GPS via Mobile You can geotag images with a Bluetooth enabled smartphone. Complete these settings after installing the dedicated Camera Connect app ( smartphone. 1. On the smartphone, activate location services. 2. Establish a Bluetooth connection. ) on the Start Camera Connect and pair the camera and smartphone via Bluetooth. 3. Select [ : GPS settings].
4. Select [GPS via mobile]. 5. Select [Enable]. 6. Take the picture. Images are geotagged with the information from the smartphone.
GPS Connection Display You can check the status of smartphone location information acquisition in the GPS connection icon on the screens for still photo shooting or movie recording ( and , respectively). Gray: Location services are off Blinking: Location information cannot be acquired On: Location information acquired Geotagging images as you shoot Images you shoot while the GPS icon is on are geotagged.
Caution The smartphone can acquire location information only while it is paired with the camera via Bluetooth. Direction information is not acquired. Acquired location information may not be accurate, depending on traveling conditions or smartphone status. It may take some time to acquire location information from the smartphone after you turn the camera on. Location information is no longer acquired after any of the following operations.
Changing or Deleting Connection Settings To change or delete the connection settings, terminate the Wi-Fi connection first. 1. Select [ 2. Select an option. : Wi-Fi/Bluetooth connection]. If the history ( the screen. 3. ) is displayed, press the < >< > keys to switch Select [Edit/delete device]. You can change the Bluetooth connection by selecting a smartphone labeled with [ ] in gray.
4. 5. Select the device for which to change or delete the connection settings. Select an option. Change or delete the connection settings on the displayed screen. Change device nickname You can change the nickname using the virtual keyboard ( Viewable imgs ( ). ) Displayed when [ Connect to smartphone] is selected. Settings will appear at the bottom of the screen.
Resetting Communication Settings All wireless communication settings can be deleted. By deleting the wireless communication settings, you can prevent their information from being exposed when you lend or give your camera to other people. 1. Select [ 2. Select [OK]. : Reset communication settings].
View Info Screen You can check error details and the camera’s MAC address. 1. Select [ 2. Press the < : Wi-Fi/Bluetooth connection]. > button. The [View info] screen will appear. When an error has occurred, press < 578 > to display the error content.
Virtual Keyboard Operations (1) Input area, for entering text (2) Cursor keys, for moving in the input area (3) Current no. of characters/no. available (4) Keyboard (5) Switch input modes (6) Space (7) Delete a character in the input area (8) Exit input To move the cursor within (1), you can also turn the < > dial. To move between (2) and (4)–(7), use the < >< >< >< > keys. Press < > to confirm input or when switching input modes.
Responding to Error Messages When an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the cause of the error by referring to the examples shown in this chapter. On the [View info] screen, press < >. Select [Error details] on the [Wi-Fi on].
11: Connection target not found In the case of [ ], is Camera Connect running? • Establish a connection using Camera Connect ( In the case of [ ). ], is the EOS software running? • Start the EOS software and reestablish the connection ( In the case of [ ). ], is the power of the printer on? • Turn on the printer.
21: No address assigned by DHCP server What to check on the camera On the camera, IP address is set to [Auto setting]. Is this the correct setting? • If no DHCP server is used, specify the settings after setting the IP address to [Manual setting] on the camera ( ). What to check on the DHCP server Is the power of the DHCP server on? • Turn on the DHCP server. Are there enough addresses for assignment by the DHCP server? • Increase the number of addresses assigned by the DHCP server.
22: No response from DNS server What to check on the camera On the camera, does the DNS server’s IP address setting match the server’s actual address? • Set the IP address to [Manual setting], and on the camera, specify the same IP address as the DNS server used ( ). What to check on the DNS server Is the power of the DNS server on? • Turn on the DNS server.
23: Device with same IP address exists on selected network What to check on the camera Do the camera and another device connected via Wi-Fi to the same network have the same IP address? • Change the camera’s IP address to avoid using the same address as another device on the network. Otherwise, change the IP address of the device that has a duplicate address. • If the camera’s IP address is set to [Manual setting] in network environments using a DHCP server, change the setting to [Auto setting] ( ).
61: Selected SSID wireless LAN network not found Are any obstacles blocking the line of sight between the camera and the antenna of the access point? • Move the antenna of the access point to a position clearly visible from the point of view of the camera ( ). What to check on the camera Does the SSID set on the camera match that of the access point? • Check the SSID at the access point, then set the same SSID on the camera.
64: Cannot connect to wireless LAN terminal Are the camera and the access point set to use the same encryption method? • The camera supports the following encryption methods: WEP, TKIP, and AES. If filtering by MAC address is active, is the MAC address of the camera in use registered at the access point? • Register the MAC address of the camera used to the access point. The MAC address can be checked on the [View info] screen ( ).
68: Cannot connect to wireless LAN terminal. Retry from the beginning. Did you hold down the access point’s WPS (Wi-Fi Protected Setup) button for the specified period of time? • Hold down the WPS button for the period of time specified in the access point’s instruction manual. Are you trying to establish a connection near the access point? • Try establishing the connection when both devices are within reach of each other. 69: Multiple wireless LAN terminals have been found. Cannot connect.
127: An error has occurred A problem other than error code number 121 to 126 occurred while the camera is connected to the Web service. • Try again to establish the Wi-Fi connection to image.canon. 130: The server is currently busy Please wait a moment and try again The image.canon site is busy at the moment. • Try accessing image.canon over Wi-Fi again later. 131: Try again An error occurred when connecting to image.canon over Wi-Fi. • Try again to establish the Wi-Fi connection to image.canon.
141: Printer is busy. Try connecting again. Is the printer performing a printing process? • Try again to establish the Wi-Fi connection to the printer after the printing process is finished. Is another camera connected to the printer via Wi-Fi? • Try again to establish the Wi-Fi connection to the printer after the Wi-Fi connection to the other camera has been terminated. 142: Could not acquire printer information. Reconnect to try again.
Wireless Communication Function Precautions Distance Between the Camera and the Smartphone Installation Location of Access Point Antenna Nearby Electronic Devices Precautions for Using Multiple Cameras If the transmission rate drops, the connection is lost, or other problems occur when using the wireless communication functions, try the following corrective actions.
Distance Between the Camera and the Smartphone If the camera is too far from the smartphone, a Wi-Fi connection may not be established even when Bluetooth connection is possible. In this case, bring the camera and the smartphone closer together, then establish a Wi-Fi connection. Installation Location of Access Point Antenna When using indoors, install the device in the room where you are using the camera. Install the device where people or objects do not come between the device and the camera.
Security If security settings have not been properly set, the following problems may occur. Transmission monitoring Third parties with malicious intent may monitor wireless LAN transmissions and attempt to acquire the data you are sending. Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Checking Network Settings Windows Open the Windows [Command Prompt], then enter ipconfig/all and press the key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. macOS In macOS, open the [Terminal] application, enter ifconfig -a, and press the key. The IP address assigned to the computer is indicated in the [en0] item next to [inet], in the format “***.***.***.***”.
Wireless Communication Status Wireless communication status can be checked on the screen.
Bluetooth Function Indicator Bluetooth Function Other than [Disable] [Disable] Connection Status Screen Bluetooth connected Bluetooth not connected Bluetooth not connected 595 Not displayed
Set-up This chapter describes menu settings on the set-up ([ ]) tab. (< to the right of page titles indicates functions only available in Creative Zone modes >/< >/< >/< >).
Tab Menus: Set-up Set-up 1 (1) Select folder (2) File numbering (3) Format card (4) Auto rotate (5) Add rotate info (6) Date/Time/Zone Set-up 2 (1) Language (2) Video system (3) Beep (4) Power saving (5) Eco mode 597
Set-up 3 (1) Display settings (2) Screen brightness (3) Viewfinder brightness (4) UI magnification (5) HDMI resolution Set-up 4 (1) Touch control (2) Sensor cleaning 598
Set-up 5 (1) Reset camera (2) Custom Functions(C.Fn) (3) Copyright information (4) Manual/software URL (5) Certification Logo Display (6) Firmware In Basic Zone modes, the following screen is displayed for [ 4]. ([ 5] is not displayed.
Folder Settings Creating a Folder Selecting a Folder You can freely create and select the folder where the captured images are to be saved. Creating a Folder 1. Select [ : Select folder]. 2. Select [Create folder].
3. Select [OK].
Selecting a Folder (1) Folder name (2) Number of images in folder (3) Lowest file number (4) Highest file number Select a folder on the folder selection screen. Captured images are stored in your selected folder. Note Folders A folder can contain up to 9999 images (file number 0001–9999). When a folder becomes full, a new folder with the folder number increased by one is created automatically. Also, if manual reset ( ) is executed, a new folder will be created automatically.
File Numbering Continuous Auto Reset Manual Reset The captured images saved in a folder are assigned a file number from 0001 to 9999. You can change how the image files are numbered. (Example) (1) File number 1. Select [ : File numbering].
2. Set the item. Select [Numbering]. Select [Continuous] or [Auto reset]. If you want to reset the file numbering, select [Manual reset] ( ). Select [OK] to create a new folder, and the file number will start with 0001. Caution If the file number in folder 999 reaches 9999, shooting will not be possible even if the card still has free space. After a message requesting you to replace the card is displayed, switch to a new card.
Continuous For continuous file numbering regardless of switching cards or creating folders Even after you replace the card or create a new folder, the file numbering continues in sequence up to 9999. This is useful when you want to save images numbered anywhere between 0001 to 9999 on multiple cards or in multiple folders into one folder on a computer.
Auto Reset For restarting file numbering from 0001 after switching cards or creating folders When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is useful if you want to organize images by cards or folders. If the replacement card or existing folder already contains images recorded previously, the file numbering of the new images may continue from the file numbering of the existing images on the card or in the folder.
Manual Reset For resetting file numbering to 0001 or starting from 0001 in new folders When you reset the file numbering manually, a new folder is created automatically and the file numbering of images saved to that folder starts from 0001. This is useful, for example, if you want to use different folders for the images taken yesterday and the ones taken today.
Formatting If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera. Caution When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images and data to a computer, etc. before formatting the card. 1. Select [ : Format card]. 2. Format the card. Select [OK].
For low-level formatting, press the < > button to add a checkmark [ ] to [Low level format], then select [OK]. Note The card capacity displayed on the card format screen may be smaller than the capacity indicated on the card. This device incorporates exFAT technology licensed from Microsoft. Conditions requiring card formatting The card is new. The card was formatted by a different camera or a computer. The card is full of images or data. A card-related error is displayed.
Card file formats SD/SDHC cards will be formatted in FAT32. SDXC cards will be formatted in exFAT. Individual movies recorded to exFAT cards are recorded as a single file (without splitting them into multiple files) even if they exceed 4 GB, so the resulting movie file will exceed 4 GB. Caution It may not be possible to use SDXC cards formatted with this camera in other cameras. Also note that exFAT-formatted cards may not be recognized by some computer operating systems or card readers.
Auto Rotate You can change the auto rotation setting that straightens images shot in vertical orientation when they are displayed. 1. Select [ : Auto rotate]. 2. Select an option. On Automatically rotates images for display on both the camera and computers. On Automatically rotates images only for display on computers. Off Caution Images captured with auto rotation set to [Off] will not rotate during playback even if you later set auto rotation to [On].
Note If a picture is taken while the camera is aimed up or down, automatic rotation to the proper orientation for viewing may not be performed correctly. If images are not rotated automatically on a computer, try using EOS software.
Adding Orientation Information to Movies For movies recorded with the camera held vertically, orientation information indicating which side is up can be added automatically to enable playback in the same orientation on smartphones or other devices. 1. Select [ : Add 2. Select an option. rotate info]. Enable Play movies on smartphones or other devices in the orientation in which they were recorded.
Date/Time/Zone When you turn on the power for the first time or if the date/time/zone have been reset, follow these steps to set the time zone first. By setting the time zone first, you can simply adjust this setting as needed in the future and the date/time will be updated to match it. Since the captured images will be appended with the shooting date and time information, be sure to set your date/time. 1. Select [ : Date/Time/Zone].
2. Set the time zone. Use the < >< Press < >. Press < >. Use the < >< > keys to select [Time zone]. > keys to select the time zone, then press < If your time zone is not listed, press the < difference from UTC in [Time difference]. 615 >.
Use the < >< > keys to select a [Time difference] option (+–/ hour/minute), then press < >. Set with the < >< > keys, then press < >. After entering the time zone or time difference, use the < keys to select [OK]. 3. >< Set the date and time. Use the < >< Set with the < > keys to select an item, then press < >< > keys, then press < 616 >. >.
4. Set daylight saving time. Set it as necessary. Use the < >< Use the < >< > keys to select [ > keys to select [ ], then press < ], then press < >. >. When the daylight saving time is set to [ ], the time set in step 3 will advance by 1 hour. If [ ] is set, the daylight saving time will be canceled and the time will go back by 1 hour. 5. Exit the setting. Use the < >< > keys to select [OK].
Note Auto power off time may be extended while the [ : Date/Time/Zone] screen is displayed.
Language 1. Select [ : Language 2. Set the desired language. ].
Video System Set the video system of any television used for display. This setting determines the frame rates available when you record movies. 1. Select [ : Video system]. 2. Select an option. For NTSC For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). For PAL For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.).
Beeps 1. Select [ : Beep]. 2. Select an option. Enable The camera beeps after focusing and in response to touch operations. Touch Disables beeping for touch operations. Disable Disables beeping for focus confirmation, self-timer shooting, and touch operations.
Power Saving You can adjust the timing of when the screen, camera, and viewfinder turn off automatically after the camera is left idle (Display off, Auto power off, and Viewfinder off). 1. Select [ : Power saving]. 2. Select an option. Note Even when [Auto power off] is set to [Disable], the screen will turn off after the time set in [Display off]. [Display off] and [Auto power off] settings have no effect when [ : Eco mode] is set to [On].
Eco Mode Enables you to conserve battery power in shooting mode. When the camera is not in use, the screen darkens to reduce battery consumption. 1. Select [ : Eco mode]. 2. Select [On]. The screen darkens when the camera is not used for approx. two seconds. Approx. ten seconds after darkening, the screen turns off. To activate the screen and prepare for shooting when the screen is off, press the shutter button halfway.
Display Settings You can specify to use the screen or viewfinder for display, to avoid accidentally activating the eye sensor when the screen is open. 1. Select [ : Display settings]. 2. Set [Display control] to [Manual].
3. Select [Manual display]. Viewfinder Always use the viewfinder for display. Screen Always use the screen for display when it is open. Note The viewfinder is always used for display when the screen is closed. With [Display control] set to [Auto], the screen is always used for display when it is open, but display switches to the viewfinder when you look through it.
Screen Brightness 1. Select [ : Screen brightness]. 2. Make the adjustment. Referring to the gray image, use the < >. brightness, then press < >< > keys to adjust Note To check the image’s exposure, referring to the histogram is recommended ( 626 ).
Viewfinder Brightness 1. Select [ : Viewfinder brightness]. 2. Make the adjustment. As you look through the viewfinder, adjust the setting with the < >< > keys, then press < >.
UI Magnification You can magnify menu screens by double-tapping with two fingers. Double-tap again to restore the original display size. 1. Select [ : UI magnification]. 2. Select [Enable]. Caution Use camera controls when configuring menu functions with the display magnified. Touch-screen operations are not supported.
HDMI Resolution Set the image output resolution used when the camera is connected to a television or external recording device with an HDMI cable. 1. Select [ : HDMI resolution]. 2. Select an option. Auto The images will automatically be displayed at the optimum resolution matching the connected television. 1080p Output at 1080p resolution. Select if you prefer to avoid display or delay issues when the camera switches resolution.
Touch Control 1. Select [ : Touch control]. 2. Select an option. [Sensitive] makes the touch-screen panel more responsive than [Standard]. To disable touch operations, select [Disable]. Caution Precautions when using the screen (touch-screen panel) Do not use sharp objects such as fingernails or ballpoint pens for touch operations. Do not use wet fingers for touch operations. If the screen has any moisture or if your fingers are wet, the touch-screen panel may not respond or malfunction may occur.
Sensor Cleaning Cleaning Now Cleaning Automatically Cleaning Now 1. Select [ : Sensor cleaning]. 2. Select [Clean now ]. Select [OK] on the confirmation screen.
Cleaning Automatically 1. Select [Auto cleaning 2. Select an option. Use the < >< ]. > keys to select an option, then press < >. Note For best results, clean with the camera in a stable position on a desk or other flat surface. Even if you repeat the sensor cleaning, the result will not improve much. Note that [Clean now ] may not be available immediately after cleaning.
Resetting the Camera The camera’s settings for shooting functions and menu functions can be restored to their defaults. 1. Select [ : Reset camera]. 2. Select an option. Basic settings Restores default settings for camera shooting functions and menu settings. Other settings Settings for individual selected items can be reset. 3. Clear the settings. Select [OK] on the confirmation screen.
Custom Functions (C.Fn) Setting Custom Functions Custom Functions Custom Function Setting Items Setting Custom Functions 1. Select [ : Custom Functions(C.Fn)]. 2. Select a Custom Function number. Use the < >< > keys to select the number of a Custom Function to configure (1), then press < >. Current Custom Function settings are indicated below the respective function number at the bottom of the screen (2).
3. Change the setting as desired. Select a setting option. To set up another Custom Function, repeat steps 2–3. Note To clear all Custom Function settings you have configured (except [Custom Controls]), access [ : Reset camera] and select [Custom Functions(C.Fn)] in [Other settings].
Custom Functions Shading indicates that the Custom Function does not apply to this still photo shooting or movie recording. (The settings have no effect.) C.Fn I: Exposure Still Photo Shooting (1) ISO expansion ○ (2) Safety shift ○ Movie Recording ○ C.
Custom Function Setting Items Custom Functions are divided into two groups by function: C.Fn I: Exposure and C.Fn II: Others. C.Fn I: Exposure C.Fn 1: ISO expansion Makes “H” (equivalent to ISO 25600) available as an ISO speed you can set. Note that expanded ISO speeds (H) are not available when [ : Highlight tone priority] is set to [Enable] or [Enhanced]. 0:Disable 1:Enable C.
C.Fn II: Others C.Fn 3: Custom Controls You can assign frequently used functions to camera buttons that are easy for you to use. 1. Select a part of the bar. 2. Select a function to assign. Press < > to set it. Note With the screen in step 1 displayed, you can press the < > button to restore the Custom Control settings to their defaults. [Custom Controls] are not cleared even if you access [Reset camera] and select [Custom Functions(C.Fn)] in [Other settings].
Functions available for camera controls AF Function Metering and AF start ○ ○ AF stop ○ Set AF point to center ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ AF method ○ ○ ○ ○ ○ ○ Touch & drag AF ○ ○ ○ ○ ○ ○ Eye detection ○ ○ ○ ○ ○ ○ One-Shot AF Servo AF MF Function Manual focus ○ ○ ○ ○ ○ ○ Peaking ○ ○ ○ ○ ○ ○ Exposure Function Metering start ○ AE lock AE lock (while button pressed) ○ ○ AE lock/FE lock ○ Exposure compensation ○ ○ ○ ○ ○ Set ISO speed ○ ○ ○ ○ ○
Movies Function Movie recording ○ ○ ○ ○ ○ ○ Pause Movie Servo AF ○ ○ ○ ○ ○ ○ Image Function Image quality ○ ○ ○ ○ ○ ○ One-touch image quality setting ○ ○ ○ ○ ○ ○ One-touch image quality (hold) ○ ○ ○ ○ ○ ○ Still img aspect ratio ○ ○ ○ ○ ○ ○ Auto Lighting Optimizer ○ ○ ○ ○ ○ ○ White balance ○ ○ ○ ○ ○ ○ Picture Style ○ ○ ○ ○ ○ ○ 640
Operation Function Depth-of-field preview ○ ○ ○ ○ ○ ○ Magnify ○ ○ ○ ○ ○ ○ Image replay ○ ○ ○ ○ ○ ○ Magnify images during playback ○ ○ ○ ○ ○ ○ Menu display ○ ○ ○ ○ ○ ○ Drive mode ○ ○ ○ ○ ○ ○ Touch Shutter ○ ○ ○ ○ ○ ○ ○ Select folder ○ ○ ○ ○ ○ Create folder ○ ○ ○ ○ ○ ○ Maximize screen brightness (temp) ○ ○ ○ ○ ○ ○ Display off ○ ○ ○ ○ ○ ○ Switch between VF/screen ○ ○ ○ ○ ○ ○ Eco mode ○ ○ ○ ○ ○ ○ Wi-Fi/Bluetooth connection
C.Fn 4: Release shutter w/o lens You can specify whether shooting still photos or movies is possible without a lens attached to the camera. 0:Disable 1:Enable C.Fn 5: Retract lens on power off You can set whether to retract gear-type STM lenses (such as EF40mm f/2.8 STM) automatically when the camera’s power switch is set to < >. 0:Enable 1:Disable Caution With auto power off, the lens will not retract regardless of the setting. Before detaching the lens, make sure that it is retracted.
Copyright Information Checking the Copyright Information Deleting the Copyright Information When you set the copyright information, it will be recorded to the image as Exif information. 1. Select [ : Copyright information]. 2. Select an option.
3. Enter text. Use the < >< >< < > to enter it. By selecting [ Select [ 4. >< > keys to select a character, then press ], you can change the input mode. ] to delete a character. Exit the setting. Press the < > button, then press [OK]. Checking the Copyright Information When you select [Display copyright info.] in step 2, you can check the [Author] and [Copyright] information that you entered.
Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information. Caution If the entry for “Author” or “Copyright” is long, it may not be displayed entirely when you select [Display copyright info.]. Note You can also set or check the copyright information with EOS Utility (EOS software).
Other Information Manual/software URL To download instruction manuals, select [ : Manual/software URL] and scan the displayed QR code with a smartphone. You can also use a computer to access the website at the URL displayed and download software. Certification Logo Display Select [ : Certification Logo Display] to display some of the logos of the camera’s certifications. Other certification logos can be found on the camera body and packaging.
My Menu On the My Menu tab, you can register menu items and Custom Functions you often adjust. Caution The [ ] tab is not displayed when [ [ : Menu display] to [Standard] ( : Menu display] is set to [Guided]. Change ).
Tab Menus: My Menu (1) Add My Menu tab (2) Delete all My Menu tabs (3) Delete all items (4) Menu display 648
My Menu Registration Adding My Menu Tabs Registering Menu Items on My Menu Tabs My Menu Tab Settings Deleting All My Menu Tabs/Deleting All Items Menu Display Adding My Menu Tabs 1. Select [Add My Menu tab]. 2. Select [OK]. You can create up to five My Menu tabs by repeating steps 1 and 2.
Registering Menu Items on My Menu Tabs 1. Select [MY MENU*: Configure]. 2. Select [Select items to register]. 3. Register the desired items. Select an item, then press < >. Select [OK] on the confirmation screen. You can register up to six items. To return to the screen in step 2, press the < 650 > button.
My Menu Tab Settings You can sort and delete items on the menu tab, and rename or delete the menu tab itself. Sort registered items You can change the order of the registered items in My Menu. Select [Sort registered >. With [ ] displayed, press the items], select an item to rearrange, then press < < >< > keys to rearrange the item, then press < >. Delete selected items/Delete all items on tab You can delete any of the registered items.
Rename tab You can rename the My Menu tab from [MY MENU*]. 1. Select [Rename tab]. 2. Enter text. To delete any unneeded characters, select [ Use the < < >. >< By selecting [ 3. >< >< ], you can change the input mode. Confirm input. Press the < ]. > keys to select a character, then press > button, then select [OK].
Deleting All My Menu Tabs/Deleting All Items You can delete all the created My Menu tabs or My Menu items registered on them. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [ ] tab will revert to its default. Caution Performing [Delete all My Menu tabs] also deletes tab names renamed with [Rename tab].
Menu Display You can select [Menu display] to set the menu screen that is to appear first when you press the < > button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [ ] tab selected. Display only My Menu tab Restricts display to the [ ] tab ([ ]/[ ]/[ 654 ]/[ ]/[ ] tabs are not displayed).
Reference This chapter provides reference information on camera features.
Importing Images to a Computer Connecting to a Computer via an Interface Cable (Sold Separately) Card Reader Connecting to a Computer via Wi-Fi You can use EOS software to import images from the camera to a computer. There are three ways to do this. Connecting to a Computer via an Interface Cable (Sold Separately) 1. 2. Install the software ( ). Connect the camera to the computer with an interface cable (sold separately). As an interface cable, you can use a IFC-600PCU cable (sold separately).
Caution With a Wi-Fi connection established, the camera cannot communicate with the computer even if they are connected with an interface cable. Card Reader You can use a card reader to import images to a computer. 1. Install the software ( 2. Insert the card into the card reader. 3. Use Digital Photo Professional to import the images. ). Refer to the Digital Photo Professional Instruction Manual.
Household Power Outlet Accessories You can power the camera from a household power outlet with DC Coupler DR-E12 and Compact Power Adapter CA-PS700 (each sold separately). 1. Connect the power cord. Connect the power cord as shown in the illustration. After using the camera, unplug the power plug from the power outlet. 2. Insert the DC coupler. Make sure the camera is off. Open the card/battery compartment cover and insert the coupler with the terminals facing as shown. Close the cover.
3. Connect the adapter to the coupler. Open the DC cord hole cover and insert the adapter plug fully into the coupler terminal. Caution Do not connect or disconnect the power cord when the camera’s power switch is set to < >.
Troubleshooting Guide Power-related problems Shooting-related problems Problems with wireless features Operation problems Display problems Playback problems Sensor cleaning problems Computer connection problems Troubleshoot camera issues as described in this section. If this Troubleshooting Guide does not resolve the problem, take the camera to the nearest Canon Service Center.
Power-related problems The battery does not charge. If the battery’s remaining capacity ( ) is 94% or higher, the battery will not be charged. Do not use any battery packs other than a genuine Canon Battery Pack LP-E12. The charger’s lamp blinks at high speed. If (1) the battery charger or battery has a problem or (2) communication with the battery failed (with a non-Canon battery pack), the protection circuit will stop charging, and the charge lamp will blink in orange at a constant high speed.
The battery becomes exhausted quickly. Use a fully charged battery ( ). The battery performance may have degraded. If the battery performance is poor, replace the battery with a new one. The number of available shots will decrease with any of the following operations: • Pressing the shutter button halfway for a prolonged period • Using AF often, but without shooting • Using the lens’s Image Stabilizer. • Using the wireless communication functions The camera turns off by itself. Auto power off is in effect.
Shooting-related problems The lens cannot be attached. To attach EF/EF-S lenses, you will need a mount adapter. The camera cannot be used with RF lenses ( ). No images can be shot or recorded. Make sure the card is properly inserted ( ). Slide the card’s write-protect switch to the Write/Erase setting ( ). If the card is full, replace the card or delete unnecessary images to make space ( , ). Shooting is not possible if the AF point turns orange when you attempt to shoot still photos or record movies.
The continuous shooting speed is slow. High-speed continuous shooting may be slower depending on conditions such as the ambient temperature, battery level, flicker reduction, shutter speed, aperture value, subject conditions, brightness, AF operation, type of lens, use of flash, and shooting settings. For details, see Drive Mode. The maximum burst during continuous shooting is lower.
The external Speedlite does not fire. Make sure the external Speedlite is securely attached to the camera. The Speedlite always fires at full output. If you use a flash unit other than an EL/EX series Speedlite, the flash will always fire at full output ( ). The flash always fires at full output when [Flash metering mode] in external flash Custom Function settings is set to [TTL flash metering] (autoflash) ( ). Flash exposure compensation cannot be set for the external Speedlite.
A white [ ] or red [ ] icon is displayed in still photo shooting. It indicates that the camera’s internal temperature is high. Image quality of still photos may be worse when a white [ ] icon is displayed. Display of a red [ ] icon indicates that shooting will soon stop automatically ( ). ISO 100 cannot be set or ISO speed expansion cannot be selected in still photo shooting. The minimum speed in the ISO speed range is ISO 200 when [ : Highlight tone priority] is set to [Enable] or [Enhanced].
The manually set ISO speed changes when switching to movie recording. For still photo shooting, ISO speed is set according to [ISO speed] in [ : ISO speed settings] ( ), and for movie recording, according to [ISO speed] in [ : speed settings] ( ). ISO ISO 100 cannot be set or ISO speed expansion cannot be selected during movie recording. Check the [ISO speed] setting in [ : ISO speed settings]. Expanded ISO speeds are not available when [ : Highlight tone priority] is set to [Enable].
Problems with wireless features Cannot pair with a smartphone. Use a smartphone compliant with Bluetooth Specification Version 4.1 or later. Turn on Bluetooth from the smartphone settings screen. Pairing with the camera is not possible from the smartphone’s Bluetooth settings screen. Install the dedicated app Camera Connect (free of charge) on the smartphone ( ). Pairing with a previously paired smartphone is not possible if pairing information registered for another camera remains on the smartphone.
Operation problems Touch operation is not possible. Make sure [ : Touch control] is set to [Standard] or [Sensitive] ( ). A camera button or dial does not work as expected. Check the [Custom Controls] setting in [ : Custom Functions(C.Fn)] ( ). In movie recording, check the [ : Shutter btn function for movies] setting ( 669 ).
Display problems The menu screen shows fewer tabs and items. Certain tabs and items are not shown in Basic Zone modes or movie recording. The display starts with [ ] My Menu, or the [ ] tab alone is displayed. [Menu display] on the [ ] tab is set to [Display from My Menu tab] or [Display only My Menu tab]. Set [Normal display] ( ). The file name’s first character is an underscore (“_”). Set [ : Color space] to [sRGB]. If [Adobe RGB] is set, the first character will be an underscore ( ).
The screen does not display a clear image. If the screen is dirty, use a soft cloth to clean it. The screen display may seem slightly slow in low temperatures or may look black in high temperatures, but it will return to normal at room temperature.
Playback problems A red box is displayed on the image. [ : AF point disp.] is set to [Enable] ( ). During image playback, the AF points are not displayed. AF points are not displayed when the following types of images are played back: : • Images taken in < • Images taken in < > mode. : > mode. • Images taken with Multi Shot Noise Reduction applied. • Cropped images. The image cannot be erased. If the image is protected, it cannot be erased ( ). Still photos and movies cannot be played back.
No picture appears on the television. Make sure [ : Video system] is set to [For NTSC] or [For PAL] correctly for the video system of your television. Make sure the HDMI cable’s plug is inserted all the way in ( ). There are multiple movie files for a single movie recording. If the movie file size reaches 4 GB, another movie file will be created automatically ( ). However, if you use an SDXC card formatted with the camera, you can record a movie in a single file even if it exceeds 4 GB.
Sensor cleaning problems The shutter makes a sound during sensor cleaning. Although there is a mechanical sound from the shutter during cleaning after [Clean now ] in [ : Sensor cleaning] is selected, no image is recorded to the card ( ). Automatic sensor cleaning does not work. Repeated < display of the [ >/< ] icon ( > power switch operations within a short period may prevent ). Computer connection problems I cannot import images to a computer. Install EOS Utility (EOS software) on the computer ( ).
Error Codes If there is a problem with the camera, an error message will appear. Follow the on-screen instructions. If the problem persists, write down the error code (Err xx) and contact a Canon Service Center.
System Map (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (24) (13) (14) (30) (25) (15) (29) (26) (16) (31) (32) (20) (21) (17) (22) (23) (18) (19) (33) (27) (28) (34) : Bundled accessories 676 (35)
(1) Speedlite Transmitter ST-E2*1 (2) Speedlite Transmitter ST-E3-RT (3) Speedlite 270EX II (4) Speedlite EL-100 (5) Speedlite 430EX III-RT/430EX III (6) Speedlite 470EX-AI (7) Speedlite EL-1 (8) Speedlite 600EX II-RT (9) Macro Ring Lite MR-14EX II (10) Macro Twin Lite MT-26EX-RT (11) Wireless Remote Control BR-E1 (12) EF-M lenses (13) EF lenses (14) EF-S lenses (15) Neck Strap EM-200DB*2 (16) Neck Strap EM-E2 (17) Protecting Cloth PC-E1/E2 (18) Body Jacket EH32-CJ (19)
ISO Speed in Movie Recording In [ ]/[ ] mode, when set to ISO Auto ISO speed is automatically set in a range of ISO 100–12800 for Full HD/HD movies and ISO 100–6400 for 4K movies. The maximum value in the automatic setting range is expanded to H (equivalent to ISO 25600) in Full HD/HD movie recording when [ISO expansion] in [ : Custom Functions(C.Fn)] is set to [1:Enable] ( ) and then [Max for Auto] in [ : ISO speed settings] is set to [H(25600)] ( ).
Information Display Quick Control Screen Still Photo Shooting Screen Movie Recording Screen Scene Icons Playback Screen 679
Quick Control Screen In Creative Zone modes (other than the shooting functions screen) (1) AF method (2) AF operation (3) Drive mode (4) Metering mode (5) Image quality (6) Movie recording size (7) Return (8) White balance (9) Picture Style (10) Auto Lighting Optimizer (11) Creative filters (12) Still image aspect ratio 680
Shooting functions screen in Creative Zone modes (1) Shutter speed (2) Shooting mode* (3) Exposure compensation/AEB setting (4) White balance (5) Picture Style (6) White balance correction (7) AF method (8) AF operation (9) Drive mode (10) Aperture value (11) ISO speed (12) Flash exposure compensation (13) Auto Lighting Optimizer (14) Metering mode (15) White balance bracketing (16) Image quality (17) Self-timer (18) Return * These functions cannot be set with Quick Contro
During movie recording (1) Shooting mode (2) AF method (3) Movie self-timer (4) Movie recording size (5) Digital zoom (6) Movie digital IS (7) Return (8) White balance (9) Picture Style (10) Auto Lighting Optimizer (11) Miniature effect movie 682
Still Photo Shooting Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied.
(1) Battery level (2) Movie recording time available (3) Maximum burst (4) Number of available shots/Sec.
Note You can specify the information displayed in response to pressing the < > button ( ). The electronic level is not displayed when the camera is connected via HDMI to a television. Other icons may be displayed temporarily after setting adjustments.
Movie Recording Screen Each time you press the < > button, the information display will change. The display will show only the settings currently applied.
(1) Sound recording off indicator (2) Movie orientation information (3) Battery level (4) Movie recording time available/Elapsed recording time (5) Movie recording mode (6) Grid (7) AF method (8) Movie self-timer (9) Movie recording size (10) Digital zoom (11) Movie digital IS (12) Movie Servo AF (13) AE lock (14) Shutter speed (15) Audio recording level indicator (manual/line input) (16) Aperture value (17) Exposure compensation (18) Temperature warning (19) AF point (1
Caution You can specify the information displayed in response to pressing the < > button ( ). The electronic level is not displayed when the camera is connected via HDMI to a television. The electronic level, grid lines, and histogram cannot be displayed during movie recording (and if they are currently displayed, recording a movie will clear the display). When movie recording starts, the movie recording remaining time will change to the elapsed time.
Scene Icons In < > shooting mode, the camera detects the type of scene and sets all settings accordingly. The detected scene type is indicated in the upper left of the screen.
Playback Screen Basic information display for still photos (1) Wi-Fi function (2) Wi-Fi signal strength (3) Battery level (4) Current image no./Total images/No. of images found (5) Airplane mode (6) Shutter speed (7) Aperture value (8) Exposure compensation amount (9) Bluetooth function (10) Rating (11) Image protection (12) Folder no.-File no.
Caution You can specify the information displayed in response to pressing the < > button ( ). If the image was taken by another camera, certain shooting information may not be displayed. It may not be possible to play back images taken with this camera on other cameras.
Detailed information display for still photos (1) Shutter speed (2) Shooting mode (3) Aperture value (4) White balance (5) White balance correction amount (6) Exposure compensation amount (7) Shooting date and time (8) Histogram (Brightness/RGB) (9) ISO speed (10) Highlight tone priority (11) Metering mode (12) Flash photography/Flash exposure compensation amount (13) Auto Lighting Optimizer (14) Picture Style/Settings (15) Image quality/Edited image/Cropping (16) File size
Detailed information display for movies (1) Movie playback (2) Movie recording mode/Time-lapse movie/Video snapshot (3) Movie orientation information (4) Image size (5) Frame rate (6) Movie digital IS (7) Recording time (8) Movie recording format (9) Movie compression method * For simplicity, explanations are omitted for items that are also included in basic/detailed information display for still photos, which are not shown here.
Specifications Type Type: Digital single-lens non-reflex AF/AE camera with built-in flash Lens mount: Canon EF-M mount Compatible lenses: Canon EF-M lens group * Using mount adapter EF-EOS M: Canon EF or EF-S lenses * RF mount lenses cannot be used Lens focal length: Approx. 1.6 times the focal length indicated on the lens Image sensor Type: CMOS sensor (Supports Dual Pixel CMOS AF) Screen size Approx. 22.3 × 14.9 mm Effective pixels*1 Approx. 24.1 megapixels * 1: Rounded to the nearest 100,000.
Still photo recording Image type in still photo recording Image quality Resolution (pixels) 24.0 megapixels (6000 × 4000) / / Approx. 10.6 megapixels (3984 × 2656) / Approx. 5.9 megapixels (2976 × 1984) JPEG Approx. 3.8 megapixels (2400 × 1600) RAW/C-RAW 24.0 megapixels (6000 × 4000) / Still photo pixel count Recorded pixels Image quality Aspect ratio 3:2 4:3 16:9 1:1 24.0 megapixels (6000 × 4000) Approx. 21.3 megapixels* (5328 × 4000) Approx. 20.2 megapixels* (6000 × 3368) 16.
Still photo file size / Number of possible shots / Maximum burst for continuous shooting Image quality + + File size (Approx. MB) Possible shots (Approx.) Maximum burst (Approx.) 8.4 3600 36 4.5 6610 35 4.6 6480 34 2.6 11400 34 3.1 9690 34 1.8 16010 34 1.8 16340 34 27.2 1120 10 15.8 1930 16 35.6 850 10 24.2 1250 14 * The number of possible shots and maximum burst apply to a UHS-I compliant 32 GB card based on Canon testing standards.
Movie recording Movie recording format: MP4 Estimated recording time, movie bit rate, and file size Total recording time on each card (approx.) Movie recording size 32 GB 4K (UHD) 3840 × 2160 Full HD 1920 × 1080 23.98 fps 25.00 fps IPB (Standard) 59.94 fps 50.00 fps 2 hr. 21 min. 120 Mbps 861 MB/min. 1 hr. 10 min. 4 hr. 43 min. 60 Mbps 432 MB/min. 2 hr. 20 min. 9 hr. 23 min. 30 Mbps 217 MB/min. 2 hr. 42 min. 10 hr. 49 min. 26 Mbps 188 MB/min. 1 hr. 22 min. 5 hr. 28 min.
Recording microphone Built-in microphone: Stereo microphones External microphone terminal: 3.5 mm diameter stereo mini jack Recording media Recording media: SD, SDHC, and SDXC memory cards SD speed class Supported UHS speed class Supported UHS-I Supported Viewfinder (electronic viewfinder) Type: OLED color electronic viewfinder Screen size: 0.39 inch Dot count: Approx. 2,360,000 dots Specifications Coverage Approx. 100% (at L image quality, an aspect ratio of 3:2, and approx.
HDMI output HDMI video / audio output: HDMI micro OUT terminal (Type D) / CEC not supported HDMI resolution: Auto / 1080p Autofocus Item Focusing method Focusing operation AF zone Number of AF zones available for automatic selection Selectable positions for AF point Eye detection Focusing brightness range Still photo shooting Movie recording Dual Pixel CMOS AF Dual Pixel CMOS AF (Contrast detection method at 4K*1) (1) Autofocus (1) Autofocus • One-Shot AF • Movie Servo AF • Servo AF • One-Shot
Exposure control Metering functions under various shooting conditions Item Still photo shooting Metering mode Movie recording 384-zone (24 × 16) metering using the image sensor Evaluative metering When faces are detected with [ automatically set Supported +Tracking] Partial metering Supported: approx. 5.8% of the screen Spot metering Supported: approx. 2.
ISO Auto details (Still photo shooting) ISO Auto range Shooting mode Creative Zone No flash Flash on ISO 100 to ISO Auto maximum setting value ISO 100–1600 ISO 100–6400 Using built-in flash ISO 100–3200 Using external flash ISO 100–1600 *1 Scene Intelligent Auto < > Basic Zone Special scene < Depends on the shooting mode > Creative filters ISO 100–6400 ISO 100–1600 * 1: ISO 400 when BULB is set Movie recording ISO speed (Recommended exposure index) Normal ISO speed, expanded ISO speed (Movi
Shutter Still photo shooting Electronically controlled focal-plane shutter * Electronic 1st / mechanical 2nd curtain * Except when Silent Mode is set Type Rolling shutter, using the image sensor * Electronic shutter * When Silent Mode is set Shutter speed Creative Zone: 1/4000–30 sec., Bulb*1 Basic Zone: 1/4000–1 sec.*2 Maximum flash sync speed: 1/200 sec. * 1: Shooting mode: In manual recording mode only * 2: Varies depending on shooting mode.
Drive Drive mode and continuous shooting speed Single shooting ○ One-Shot AF Max. approx. 10 shots/sec.*1 Servo AF Max. approx. 7.4 shots/sec.*1 One-Shot AF Max. approx. 4.0 shots/sec.*1 Servo AF Max. approx. 4.0 shots/sec.*1 High-speed continuous shooting*3 Low-speed continuous shooting*3 Self-timer:10 sec. / remote control*2 ○ Self-timer:2 sec. / remote control*2 ○ Self-timer: Continuous ○ (2–10 shots) * 1: With a fully charged Battery Pack LP-E12, 1/1000 sec.
Print order (DPOF) System: Compliant with DPOF Version 1.1 External interface Digital terminal Terminal type USB Micro-B Transmission Hi-Speed USB (USB 2.0) equivalent Applications For PC communication For printer connection HDMI output terminal: Type D (Resolution switches automatically) * CEC not supported * [For NTSC] / [For PAL] settings are required to match the video format of the TV you are connecting to External microphone input terminal: Compatible with the 3.
Available operating time Shooting method Temperature Time available for bulb exposure Time available for movie recording (continuous recording)*1 4K 23.98 fps On-screen shooting Full HD 29.97 fps On-screen shooting Available operating time 23°C / 73°F Approx. 3 hr. 15 min. 23°C / 73°F Approx. 1 hr. 35 min. 23°C / 73°F Approx. 2 hr. 10 min. 0°C / 32°F Approx. 2 hr. 10 min. Screen on 23°C / 73°F Approx. 2 hr. 25 min. Screen off 23°C / 73°F Approx. 3 hr. 35 min. 23°C / 73°F Approx. 3 hr.
Connection, authentication, and data encryption methods Connection method Authentication Encryption WPA2-PSK AES Camera access point Open Disable WEP Open Disable Infrastructure Shared key WEP WPA-PSK TKIP AES WPA2-PSK Bluetooth Standards compliance: Bluetooth Specification Version 4.2 compliant (Bluetooth Low Energy technology) Transmission method: GFSK modulation Dimensions and weight Dimensions: Approx. 116.3 (W) × 88.1 (H) × 58.7 (D) mm Approx. 4.58 (W) × 3.47 (H) × 2.31 (D) in.
Trademarks and Licensing Trademarks About MPEG-4 Licensing Accessories Trademarks Adobe is a trademark of Adobe Systems Incorporated. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. App Store and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. Google Play and Android are trademarks of Google LLC. IOS is a trademark or registered trademark of Cisco in the U.S.
About MPEG-4 Licensing “This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.
Accessories Use of genuine Canon accessories is recommended This product is designed to achieve optimum performance when used with genuine Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery).
