Owner's Manual
• Inserting Size-AAlLR6 Batteries
1.
Insert the batteries into the Battery Magazine BGM-E9A (for
size-AAlLR6 batteries). (Fig. 8)
Make sure the + and - battery contacts are properly oriented as
shown
in
the illustration.
2.
Attach the battery magazine into the battery grip. (Fig. 9-1)
After attaching, check that the battery magazine is securely
attached to the battery grip.
3.
Close the release handle. (Fig. 9-2)
..
• Fewer images can be shot when using size-AAlLR6
batteries. Also, the number
of
possible shots may vary
depending on the batteries brand and storage conditions,
so usage
of
size-AAlLR6 batteries is recommended only
for emergencies.
• With size-AAlLR6 batteries, use six new batteries
of
the same brand at temperatures above 20°C/68°F. The
camera may not function when used in low temperatures
or when old and new batteries are used together.
• Using a Household Power Outlet
To
connect to a household power outlet, use the AC Adapter Kit
ACK-E6 (sold separately).
1.
Connect the power cord to the AC adapter, and insert the
prongs into a power outlet. Connect the DC cord to the DC
coupler. (Refer to ACK-E6 Instructions.)
2.
Insert the DC coupler into the release-handle-side battery pack
compartment
of
the battery magazine (for LP-E6). (Fig. 10)
3.
Pass the DC cord through the battery magazine cord groove
(Fig. 11-1), and attach the battery magazine to the battery grip.
When attaching the battery magazine, pass the DC cord
through the battery grip DC cord mount (Fig. 11-2).
..
• Always set the camera's power switch to <OFF> before
disconnecting the power cord.
• Be careful that the DC cord does not get pinched
between the battery grip and the battery magazine.
• Using the Battery Grip
• Turning the vertical-grip operation switch to <ON> (Fig. 12)
makes the battery grip buttons and dial function
in
the same
way as those on the camera.
• When shooting
in
the horizontal-grip position, turn the vertical-
grip operation switch to <OFF>
so
that you do not accidentally
use the buttons or dial on the battery grip.
• The battery level can be checked on the camera.
• Refer to the back
of
this sheet for instructions about the
provided soft case.
• Hand Strap
E1
(sold separately) can be used for enabling a
more secure grip.
• Specifications
Battery: (1) One or two Battery Packs LP-E6
(2) Six size-AAlLR6 Alkaline batteries
(3) AC Adapter Kit ACK-E6
Power switch: Camera's power switch
Possible shots: Refer to your camera's Instruction Manual.
Working temperature range:
O°C
- +40°C 132°F - 104°F
Working humidity: 85% or less
Dimensions: Approx. 145.6 (W) x 111.3 (H) x 85.3 (D)
mml
5.7 (W) x4.4 (H) x3.4 (D) in.
Weight: Approx. 295
g/10.4 oz. (without batteries and
battery magazine)
• All the specifications above are based on Canon's testing
standards.
• The product specifications and exterior are subject to change
without notice.