User's Manual
Table Of Contents
- Contents
- Chapter 1 Introduction
- Chapter 2 Important Safety Instructions
- Chapter 3 Connecting the Scanner
- Chapter 4 Placing Documents
- Chapter 5 Scanning with CaptureOnTouch Lite
- Scanning with CaptureOnTouch Lite
- Starting and Exiting CaptureOnTouch Lite
- Operations for the scanned image edit window
- Setting the scan mode
- Configuration and Functions of the Advanced Settings Dialog Box
- Scan Panel
- Setting Basic Scanning Conditions
- Function Restrictions Depending on Mode Setting
- Setting the output
- Environmental Settings
- Chapter 6 Special Scanning
- Practical Examples
- When you want to delete the images of the blank pages in two-sided documents
- Practical Examples
- When you do not want to scan colored lines and text
- Practical Examples
- When you want to enhance the color red
- Practical Examples
- When you want to enhance contours in images
- Practical Examples
- When you want to make lines or characters in the scanned images thicker
- Practical Examples
- How to produce a picture quality scan
- Practical Examples
- When you want to enhance text that is difficult to read because of factors such as the background of the scanned document
- Practical Examples
- To correct tilted documents and images
- Practical Examples
- When you want to detect multiple pages fed at the same time
- Practical Examples
- When you want to match the orientation of images to the text when scanning a mixture of pages with different text orientations
- Practical Examples
- When you want to rotate the images of a document placed horizontally to correct the orientation
- Chapter 7 Regular Maintenance
- Chapter 8 Detaching and attaching the feed roller and separation pad
- Chapter 9 Updating CaptureOnTouch Lite
- Chapter 10 Troubleshooting
- Chapter 11 Appendix
22
If double-feeding occurs, reduce the number of pages that you load
into the scanner at one time.
When scanning small size of multiple documents such as receipt, use
documents which have the same width.
Depending on paper quality, you may hear unusual noises while
scanning some documents, but this does not indicate a malfunction.
Loading cards
Use the card slot when scanning plastic cards. Use the following
procedure to scan the cards one by one.
1 Open the document feed tray.
2 Turn the card face up, and insert the card straight into the card slot.
When the edge of the card touches the slot, the rollers will move automatically.
The roller will stop when it has caught the edge of the card, allowing you to let
go of the card and start scanning from an application.
The card will be fed when you start scanning with an application
program. After the card has been fed completely, the rollers will turn
in the opposite direction and scanning of the card will start.
The scanned card will be ejected from the front card slot.
The card slot is disabled when documents are placed on the feed tray.
When you want to insert a card in the card slot, remove any
documents from the feed tray.
During scanning, a portion of the card will protrude from the rear card
slot at the rear of the scanner. Keep the area in front of the rear card
slot clear of objects.
Embossed cards may not be scanned correctly, depending on the
type of embossment.