User's Manual
Table Of Contents
- Contents
- Chapter 1 Introduction
- Chapter 2 Important Safety Instructions
- Chapter 3 Connecting the Scanner
- Chapter 4 Placing Documents
- Chapter 5 Scanning with CaptureOnTouch Lite
- Scanning with CaptureOnTouch Lite
- Starting and Exiting CaptureOnTouch Lite
- Operations for the scanned image edit window
- Setting the scan mode
- Configuration and Functions of the Advanced Settings Dialog Box
- Scan Panel
- Setting Basic Scanning Conditions
- Function Restrictions Depending on Mode Setting
- Setting the output
- Environmental Settings
- Chapter 6 Special Scanning
- Practical Examples
- When you want to delete the images of the blank pages in two-sided documents
- Practical Examples
- When you do not want to scan colored lines and text
- Practical Examples
- When you want to enhance the color red
- Practical Examples
- When you want to enhance contours in images
- Practical Examples
- When you want to make lines or characters in the scanned images thicker
- Practical Examples
- How to produce a picture quality scan
- Practical Examples
- When you want to enhance text that is difficult to read because of factors such as the background of the scanned document
- Practical Examples
- To correct tilted documents and images
- Practical Examples
- When you want to detect multiple pages fed at the same time
- Practical Examples
- When you want to match the orientation of images to the text when scanning a mixture of pages with different text orientations
- Practical Examples
- When you want to rotate the images of a document placed horizontally to correct the orientation
- Chapter 7 Regular Maintenance
- Chapter 8 Detaching and attaching the feed roller and separation pad
- Chapter 9 Updating CaptureOnTouch Lite
- Chapter 10 Troubleshooting
- Chapter 11 Appendix
36
Scan Panel
Scan Panel
Scan Panel is software for controlling scanning operations such as feeding
documents and stopping scanning when scanning multiple documents
one after the other.
Scan Panel runs when [Feeding Option] is set to [Panel-Feeding] or
[Automatic Feeding] in the advanced settings dialog box. In this case, the
Scan Panel appears when you are not scanning and the scanner enters
the wait state.
If you place the next document and then click the Start button in Scan
Panel, scanning of the placed document starts.
You can stop scanning part way through by clicking the [STOP] button of
Scan Panel.
If you click [More] in the advanced settings dialog box and then set
[Feeding Option] to [Panel-Feeding] or [Automatic Feeding] in the dialog
box which appears, Scan Panel appears when the scanner starts.
When scanning of the first document finishes, Scan Panel appears and
the scanner enters the wait state. If you place the next document and then
click [Continue scanning], scanning of the placed document starts.
You can stop scanning part way through by clicking [Finish].
Setting Basic Scanning Conditions
This section provides an overview of the basic setting items that are
the minimum requirements when configuring the scanner settings.
Confirming Basic Conditions for Scanning
When you scan a document, make sure you confirm the [Color mode],
[Page Size], [Dots per inch], and [Scanning Side] basic conditions in the
Basic tab.