User's Manual
Table Of Contents
- Contents
- Chapter 1 Introduction
- Chapter 2 Important Safety Instructions
- Chapter 3 Connecting the Scanner
- Chapter 4 Placing Documents
- Chapter 5 Scanning with CaptureOnTouch Lite
- Scanning with CaptureOnTouch Lite
- Starting and Exiting CaptureOnTouch Lite
- Operations for the scanned image edit window
- Setting the scan mode
- Configuration and Functions of the Advanced Settings Dialog Box
- Scan Panel
- Setting Basic Scanning Conditions
- Function Restrictions Depending on Mode Setting
- Setting the output
- Environmental Settings
- Chapter 6 Special Scanning
- Practical Examples
- When you want to delete the images of the blank pages in two-sided documents
- Practical Examples
- When you do not want to scan colored lines and text
- Practical Examples
- When you want to enhance the color red
- Practical Examples
- When you want to enhance contours in images
- Practical Examples
- When you want to make lines or characters in the scanned images thicker
- Practical Examples
- How to produce a picture quality scan
- Practical Examples
- When you want to enhance text that is difficult to read because of factors such as the background of the scanned document
- Practical Examples
- To correct tilted documents and images
- Practical Examples
- When you want to detect multiple pages fed at the same time
- Practical Examples
- When you want to match the orientation of images to the text when scanning a mixture of pages with different text orientations
- Practical Examples
- When you want to rotate the images of a document placed horizontally to correct the orientation
- Chapter 7 Regular Maintenance
- Chapter 8 Detaching and attaching the feed roller and separation pad
- Chapter 9 Updating CaptureOnTouch Lite
- Chapter 10 Troubleshooting
- Chapter 11 Appendix
55
Chapter 7 Regular Maintenance
Clean the scanner and perform maintenance on a regular basis as
described below to maintain peak scanning quality.
Cleaning the Scanner.........................................................................55
Cleaning the Scanning Glass and the Rollers ................................. 56
When cleaning the outside and inside of the scanner, turn the power
OFF and disconnect the USB cable from the computer.
Do not use spray cleaners to clean the scanner. Precision
mechanisms, such as the light source, may get wet, and cause a
malfunction.
Never use paint thinner, alcohol, or other organic solvents to clean
the scanner. Such solvents can damage or discolor the exterior of the
scanner, or create a risk of fire or electrical shock.
Cleaning the Scanner
To clean the exterior of the scanner, dampen a cloth with water or a
mild detergent, wring the cloth out thoroughly, and then wipe the dirt
away. Then use a dry, soft cloth to wipe away any moisture.
Do not use a coarse cloth or dirty cloth because it may result in
scratches.
Cleaning the Inside of the Scanner
Dust or paper particles inside the scanner may cause lines or smudges to
appear on scanned images. Use compressed air to periodically clean dust
and paper particles from the document feed opening and the inside of the
scanner. After finishing a large scanning job, turn OFF the scanner and
then clean out any paper particles remaining inside the scanner.