User's Manual
Table Of Contents
- Contents
- Chapter 1 Introduction
- Chapter 2 Important Safety Instructions
- Chapter 3 Connecting the Scanner
- Chapter 4 Placing Documents
- Chapter 5 Scanning with CaptureOnTouch Lite
- Scanning with CaptureOnTouch Lite
- Starting and Exiting CaptureOnTouch Lite
- Operations for the scanned image edit window
- Setting the scan mode
- Configuration and Functions of the Advanced Settings Dialog Box
- Scan Panel
- Setting Basic Scanning Conditions
- Function Restrictions Depending on Mode Setting
- Setting the output
- Environmental Settings
- Chapter 6 Special Scanning
- Practical Examples
- When you want to delete the images of the blank pages in two-sided documents
- Practical Examples
- When you do not want to scan colored lines and text
- Practical Examples
- When you want to enhance the color red
- Practical Examples
- When you want to enhance contours in images
- Practical Examples
- When you want to make lines or characters in the scanned images thicker
- Practical Examples
- How to produce a picture quality scan
- Practical Examples
- When you want to enhance text that is difficult to read because of factors such as the background of the scanned document
- Practical Examples
- To correct tilted documents and images
- Practical Examples
- When you want to detect multiple pages fed at the same time
- Practical Examples
- When you want to match the orientation of images to the text when scanning a mixture of pages with different text orientations
- Practical Examples
- When you want to rotate the images of a document placed horizontally to correct the orientation
- Chapter 7 Regular Maintenance
- Chapter 8 Detaching and attaching the feed roller and separation pad
- Chapter 9 Updating CaptureOnTouch Lite
- Chapter 10 Troubleshooting
- Chapter 11 Appendix
59
Detaching and attaching the Feed Roller
To remove or attach the feeding roller, follow the procedure below.
Detaching the Feed Roller
1 Open the feed tray.
2 Open the feeder cover.
3 Open the roller cover
4 Slide the feed rollers to left.
5 Remove the feed rollers.
Attaching the Feed Roller
Use the following procedure to replace the feed roller.
1 Attach the new feed rollers. Align the notch on the roller with the shaft
on the main unit side.