User's Manual
Table Of Contents
- Contents
- Chapter 1 Introduction
- Chapter 2 Important Safety Instructions
- Chapter 3 Connecting the Scanner
- Chapter 4 Placing Documents
- Chapter 5 Scanning with CaptureOnTouch Lite
- Scanning with CaptureOnTouch Lite
- Starting and Exiting CaptureOnTouch Lite
- Operations for the scanned image edit window
- Setting the scan mode
- Configuration and Functions of the Advanced Settings Dialog Box
- Scan Panel
- Setting Basic Scanning Conditions
- Function Restrictions Depending on Mode Setting
- Setting the output
- Environmental Settings
- Chapter 6 Special Scanning
- Practical Examples
- When you want to delete the images of the blank pages in two-sided documents
- Practical Examples
- When you do not want to scan colored lines and text
- Practical Examples
- When you want to enhance the color red
- Practical Examples
- When you want to enhance contours in images
- Practical Examples
- When you want to make lines or characters in the scanned images thicker
- Practical Examples
- How to produce a picture quality scan
- Practical Examples
- When you want to enhance text that is difficult to read because of factors such as the background of the scanned document
- Practical Examples
- To correct tilted documents and images
- Practical Examples
- When you want to detect multiple pages fed at the same time
- Practical Examples
- When you want to match the orientation of images to the text when scanning a mixture of pages with different text orientations
- Practical Examples
- When you want to rotate the images of a document placed horizontally to correct the orientation
- Chapter 7 Regular Maintenance
- Chapter 8 Detaching and attaching the feed roller and separation pad
- Chapter 9 Updating CaptureOnTouch Lite
- Chapter 10 Troubleshooting
- Chapter 11 Appendix
8
Back View
(1) Rear Card Slot
When a plastic card is fed, a portion of the card protrudes from here
momentarily.
(2) USB Connector
Connect the USB cable supplied with the scanner (or one that
supports Hi-Speed USB 2.0).
(3) Theft Prevention Hole (Security Slot)
Attach a key chain, etc. here to prevent the scanner from being
stolen.
Power Supply
The power of the scanner is designed to turn ON when the feed tray
is opened or closed. To turn the power ON or OFF, operate the
scanner as described below.
Turning ON the Power
1
Raise the feed tray slightly while pressing the feed tray release lever.
This scanner does not have a power switch. For details, see "Power
Supply" on p.8.