Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Getting Started
- Wireless Flash Photography
- Wireless Settings
- ETTL: Fully Automatic Wireless Flash Photography
- Advanced Shooting with Fully Automatic Wireless Flash
- Using Multiple Senders
- ETTL: Wireless Multiple-Flash Photography with Flash Ratio
- M: Wireless Multiple-Flash Photography with Manual Flash Output
- Gr: Shooting in a Different Flash Mode for Each Group
- Clearing Transmitter Settings
- Test Firing from Receivers
- Remote Release from Receivers
- Setting Transmitter Functions from the Camera
- Customizing the Transmitter
- Reference
- Basic Instructions
- Warranty
Autoflash with Three Receiver Groups
Once flash groups A and B have been set up, you can add group C to fire with multiple flash
units. For an overview of flash control, see “Group Control.”
C is useful when you want lighting that eliminates the subject's background shadow.
1.
Set a flash unit as firing group C.
For instructions on configuring receiver settings, refer to the instruction
manual of the flash unit.
2.
Select [Flash group].
46