Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Getting Started
- Wireless Flash Photography
- Wireless Settings
- ETTL: Fully Automatic Wireless Flash Photography
- Advanced Shooting with Fully Automatic Wireless Flash
- Using Multiple Senders
- ETTL: Wireless Multiple-Flash Photography with Flash Ratio
- M: Wireless Multiple-Flash Photography with Manual Flash Output
- Gr: Shooting in a Different Flash Mode for Each Group
- Clearing Transmitter Settings
- Test Firing from Receivers
- Remote Release from Receivers
- Setting Transmitter Functions from the Camera
- Customizing the Transmitter
- Reference
- Basic Instructions
- Warranty
Remote Release from Receivers
Flash units set as receivers can be used to shoot remotely, enabling remote control
shooting. For instructions, refer to the instruction manual of the flash unit.
Caution
Shooting is not possible when autofocus fails. It is recommended that you set the
lens focus mode switch to < > and focus manually before releasing the shutter.
Note
Remote release is performed with “single shooting” regardless of the camera's
drive mode setting.
When there are multiple senders, remote release applies to the one that was
started first.
65