Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Getting Started
- Wireless Flash Photography
- Wireless Settings
- ETTL: Fully Automatic Wireless Flash Photography
- Advanced Shooting with Fully Automatic Wireless Flash
- Using Multiple Senders
- ETTL: Wireless Multiple-Flash Photography with Flash Ratio
- M: Wireless Multiple-Flash Photography with Manual Flash Output
- Gr: Shooting in a Different Flash Mode for Each Group
- Clearing Transmitter Settings
- Test Firing from Receivers
- Remote Release from Receivers
- Setting Transmitter Functions from the Camera
- Customizing the Transmitter
- Reference
- Basic Instructions
- Warranty
Slow synchro
You can set the flash-sync speed for wireless flash photography in < > (aperture
priority) or < > (Program AE) mode.
Flash mode
You can choose the flash mode from [E-TTL II flash metering], [Manual flash], [MULTI
flash (stroboscopic)], or [Individual group control] to suit your desired flash
photography.
Wireless functions
Automatically set to wireless flash photography using radio transmission. For details,
see “Wireless Flash Photography.”
Shutter synchronization
As the flash firing timing/method, you can choose from [First-curtain synchronization],
[Second-curtain synchronization], or [High-speed synchronization]. For normal
wireless flash photography, set to [First-curtain synchronization].
Flash exposure compensation
Just as exposure compensation is adjustable, you can also adjust flash output.
Flash exposure bracketing
You can take three shots while automatically changing the flash output.
Clear settings
You can restore default transmitter settings.
Note
With [Flash mode] set to [Individual group control], choose [E-TTL II], [Manual
flash], [AutoExtFlash], or [Disable] as the flash mode for each group.
70