Owner's Manual
Table Of Contents
- Advanced User Guide
- Contents
- Introduction
- Getting Started
- Wireless Flash Photography
- Wireless Settings
- ETTL: Fully Automatic Wireless Flash Photography
- Advanced Shooting with Fully Automatic Wireless Flash
- Using Multiple Senders
- ETTL: Wireless Multiple-Flash Photography with Flash Ratio
- M: Wireless Multiple-Flash Photography with Manual Flash Output
- Gr: Shooting in a Different Flash Mode for Each Group
- Clearing Transmitter Settings
- Test Firing from Receivers
- Remote Release from Receivers
- Setting Transmitter Functions from the Camera
- Customizing the Transmitter
- Reference
- Basic Instructions
- Warranty
: Custom Functions
You can set Custom Functions for the transmitter from the camera menu. The information
displayed varies depending on the camera used.
1.
Select [Flash C.Fn settings].
In [External Speedlite control], select [Flash C.Fn settings].
2.
Set the Custom Function.
Select the Custom Function number and set the function.
3.
Change the setting.
Select an option and then [OK].
74