Operation Manual

101
Menu Settings
Advanced Guide Menu Settings
RGB alignment
Correct color misalignment.
Submenu Function
Registration
Color misalignment affecting the entire image can be corrected by
moving red, green, or blue components into position, in 1-pixel
increments.
Advanced
registration
Precise correction of red, green, or blue misalignment in different areas
of the screen is possible by color and area.
For detailed instructions, refer to “Advanced Registration to Adjust
Projected Images” (P153).
[Off] Disable local correction of color misalignment.
[Adjust] Display a menu for local correction of color misalignment.
Submenu Function
5-point
adjustment
Off Disable adjustment.
Adjust
Enter 5-point adjustment mode (in screen
corners and at the center).
Manual
adjustment
Precise adjustment based on 54 points (in a 6 x
9grid).
Reset Restore the original position, before adjustment.
With advanced registration, checkered or halftone image areas
may be affected by uneven colors or image artifacts.
• [Registration] and [Advanced registration] settings are retained even if you change
the panel drive mode.
• 5-point adjustment enables basic correction of color misalignment across the
screen, by moving adjustment points in the center and each corner. To correct
registration only in certain areas, try manual adjustment.
• Any values you set in 5-point adjustment are retained if you subsequently perform
manual adjustment. For more precise correction after 5-point adjustment, perform
manual adjustment.
• Any manual adjustment values you set before switching to 5-point adjustment are
cleared.