Operation Manual

103
Menu Settings
Advanced Guide Menu Settings
Edge blending
Brightness and colors of overlapping edges of images from multiple projectors, which form a
blending area, can be adjusted for a more seamless appearance. For detailed instructions, see
“Projecting from Multiple Projectors at Once (Edge Blending)” (P149).
[Off] Disable blending.
[Adjust] Display the menu for blending area adjustment.
Start marker End marker
Blending area
When adjusting the image
projected from the right side
Adjustment may not eliminate different colors or brightnesses in the blending area.
For best edge-blending results, use all projectors in the same image mode (Optimal
image mode: [Photo/sRGB].) and make the following adjustments.
(1) Brightness, contrast, R/G/B gain, R/G/B offset, black level, color blending, color
temperature, color level, color balance, sharpness, gamma
(2) Color adjustment, by using 6-axis color adjustment
(3) Gamma adjustment, by fine-tuning gamma
(4) Corner adjustment, using keystone correction