Operation Manual

Connection Procedure

Basic Guide Connection Procedure

■ Settings for Multi Input Mode

Select how to combine four DVI inputs or two HDMI inputs to form an image. Check

computer video output settings in advance, because you must match the display

layout (whether split-screen display or display in four quadrants).

1 In the [Install settings] menu, select [Professional settings] > [Multi input

mode select].

2 Select the input mode to use.

Multi Input Mode

Specify the type of image (including resolution) supplied to the terminals. Use [Normal] for

most signals. For specific signals, use [Single], [1x2], [2x2], or [1x4] as needed. For

details, check the table of supported signals. (P169)

• [Normal] setting

Supports many typical images, including [Single], [1x2], [2x2], and [1x4].

• [Single] setting

Supports many specialized signals from a single piece of connected equipment.

• [1x2] setting

Supports many specialized signals when two signals are supplied.

• [2x2] setting

Supports many specialized signals when four signals are supplied, for projection in a

2x2 layout.

• [1x4] setting

Supports many specialized signals when four signals are supplied, for projection side

by side.