Operation Manual

78
Projection Procedure
■ Switching the mode to the DICOM SIM Mode
1 Press the IMAGE button on the remote control until [DICOM SIM] is
displayed or select [DICOM SIM] from [Image mode] in the [Image
adjustment] menu.
2 Press the TEST PATTERN button on the remote control until [DICOM] is
displayed or select [On] from [Test pattern] in the [Install settings] menu.
3 As you watch the test pattern, adjust the items in the following menus.
• Brightness
• Contrast
• Sharpness
• Gamma
4 Press the OK button after the setting.
Perform one of the followings to obtain an appropriate projection:
- Darken the ambient light
- Reduce the image size
- Reduce the projection distance