Operation Manual

84
Using Menus
Use the menus to set the operation of the projector in detail.
Menu Configuration
The menu screen is divided into 6 tabs as shown below.
Contents of menu Menu items
[Information] tab (P148)
You can check information about the
signal types of the images projected and
other information.
[System settings] tab (P108)
You can set the operation of the projector.
[Image adjustment] tab (P90)
You can adjust the image quality and colors
according to your preference.
[Network settings] tab (P123)
These settings are for when using the projector
from a PC via a network.
For the network settings, refer to “Network
settings” (P122).
[Install settings] tab (P97)
This setting is used when installing the projector.
[Input settings] tab (P87)
You can set the type of signal or the method of
projection of the images input.