User Manual

ENG-14
■ Display mode selection
You can switch from one display mode to
another when the display in ON by pressing the
display mode select button for a short duration
(less than 1 second).
Focusing distance display mode
Focal length display mode
Camera shake amount display mode
 The last display mode setting is remembered
even when the camera is turned <OFF>.
 A black-white reversed display is obtained by
pressing the display mode select button between
1 and 2 seconds.
■ Display modes
(1) Focusing distance display mode
This mode is used to display the lens’s focusing
distance. The depth-of-eld scale appears at
the bottom of the display (see “8. Depth-of-Field
Scale” on p. 18).
(2) Focal length display mode
This mode is used to display the lens’s focal
length. When the lens is used with an APS-H or
APS-C format camera, a 35 mm equivalent focal
length image is displayed by the camera (see
“Additional Information” on p. 21).
When a 35 mm equivalent focal length image is
displayed by the camera, “35mm EQV” is displayed
in the lower left of the lens information display.
Lens Information Display