User Manual
ENG-16
■ Information display method according to
camera type
When the lens information display is set to display
information (p. 13), display conditions differ
according to the type of camera (1 to 3 below) used.
1. When the lens is used with either a lm
single-lens reex camera or digital single-lens
reex camera, the following operations will be
indicated on the lens information display for a
period of approximately 10 seconds.
S
hutter button is pressed halfway/all the way
Display mode select button is pressed
(when pressed for under 2 seconds)
When the following operations are performed
while related operation information is being
displayed, they will be indicated for an additional
period of approximately 10 seconds beginning
from when such operation was initiated.
• Shutter button is pressed halfway/all the way
• Display mode select button is pressed (when
pressed for under 2 seconds)
• Manual focus operation
• Zooming
• Switching from Live View shooting to still-image shooting
• Switching from movie shooting to still-image shooting
2. When the lens is used with a digital single-
lens reex camera, display is switched
to continuous display when the following
operations are performed.
When switching to Live View shooting
When switching to movie shooting
When set to movie shooting before turning
the camera <ON>.
To stop continuous display, press the display mode
select button for more than 2 seconds.
Lens Information Display