Specifications

Try Scanning
14
Adjusting the Scan Area (Cropping Frame)
If you want to trim the image further, drag the mouse
diagonally to select the area.
Correcting Images
To correct the scanned image, click the appropriate check box
to place a check mark in it.
8 Click [Scan].
The final scan will start.
9 Click the close box (Windows) or (Macintosh)
in the ScanGear CS window to close it.
The scanned image will appear in the PhotoStudio window.
10 Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder
where you wish to store the image file, enter a file name,
select a file type (JPEG format is recommended) and click
[Save].
11Click the close box (Windows) or
(Macintosh) in the PhotoStudio window to close it.
• Do not touch the scanner while it is
operating.
• If the scanner does not perform as described above, read the "Troubleshooting" section of the
Scanning Guide (HTML format manual).
• For details about the bundled software programs, read the Scanning Guide or the user guides
(PDF format manuals) for each software program on the CanoScan Setup Utility CD-ROM.