Specifications

Scanning Film

1 Place the film in the film guide.

Place the film face up in the film guide (images and

words should read correctly from above) with the

spaces between frames aligned with the white lines on

the guide.

2 Remove the cap from the film adapter unit

and gently set the unit over the frame you

wish to scan.

Align the tab on the film adapter unit with the film

guide.

3 Gently close the document cover.

4 Start ArcSoft PhotoStudio.

Refer to step 2 on page 12.

5 Start ScanGear CS.

Refer to step 4 on page 13.

6 Select a Select Source option.

You can select from the following options for films.

Negative Film (Color) / Positive Film (Color)

• Do not move the film adapter unit

once it has been placed on the fIlm

guide. Sliding it may scratch the

film.

• The document cover does not touch the document glass completely. Be careful not to

force the document cover down.

• Use ScanGear CS’s Advanced Mode

to scan monochrome films (See the

Scanning Guide.).

White Line