Specifications

Connecting the Scanner

1 Connect the scanner to the computer with the supplied USB interface cable.

There are cable holders on the side of the scanner to hold the USB cable. Use the holders to organize the

cable.

Hold the cable with the holders before setting up the stand in the upright position.

• Only use the USB interface cable provided with the scanner. Use of other cables may

lead to a malfunction.

• When the scanner is connected to the USB 1.1 port on Windows XP and "HI-SPEED USB

Device Plugged into non-HI-SPEED USB Hub" message appears, ignore the message. The

scanner operates in this condition without problems.

• The scanner does not have a power switch. The power is activated as soon as the

computer is turned on.

USB Interface Cable

Wide Flat Connector

Small Square Connector

USB Connector

Cable Holders