Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
4
115
Customization
Assignable Buttons
The camera offers a number of assignable buttons to which you can assign various function. Assign often-used
functions to the buttons you find most convenient to personalize the camera to your needs and preferences.
You can find 11 assignable buttons on the camera’s body, and 4 assignable buttons on the RC-V100 Remote
Controller. In most cases, the names of the buttons printed on the camera and accessories also indicate their
default settings.
Changing the Assigned Function
Functions can be set separately in CAMERA mode and MEDIA mode.
1Press the MENU button and, while holding it pressed down, press the assignable button whose
function you wish to change.
• A list of available functions appears.
• You can also select the appropriate menu setting from the various pages of the > [ Assignable
Buttons] menu.
2 Select the desired function.
• The selected function will be assigned to the selected button.