Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
117
Assignable Buttons
[Backlight], [Spotlight]
Toggles the light metering mode between [Standard] and [Backlight]/[Spotlight],
respectively.
Ü – 64
[IR Rec Color] Changes the color of the infrared picture between white and green. Ü –
110
[IR Light]
Only when > [v Camera Setup] > [IR Light] is set to [Toggle], turns the
camcorder's infrared light on/off.
Ü –
[Zebra: All], [Zebra: LCD],
[Zebra: VF], [Zebra: SDI],
[Zebra: HDMI]
Turns zebra patterns on/off. Ü – 84
[WFM: All], [WFM: LCD],
[WFM: VF], [WFM: SDI]
[WFM: HDMI]
Turns the selected video scope on/off. Ü Ü 99
[LUT: SDI] Turns on/off the application of the selected LUT. Ü Ü 148
[View Assist: LCD],
[View Assist: VF],
[View Assist: HDMI]
Turns view assistance on/off. Ü – 148
[False Color: All],
[False Color: LCD],
[False Color: VF],
[False Color: SDI],
[False Color: HDMI]
Turns the false color overlay on/off.
Ü – 84
[False Color Index] Displays/hides the false color index screen.
[White Balance]
Enters the direct setting mode with the white balance mode highlighted and
ready to be adjusted.
Ü – 65
[Set White Balance] Starts the white balance calibration for a custom white balance setting. Ü – 67
[AWB Lock]
1
While using auto white balance (AWB), locks the current white balance settings. Ü – 66
[¼ Daylight],
[É Tungsten],
[
È
Kelvin]
Changes the white balance mode/setting to the respective option. Ü – 65
[IS Mode] Toggles between standard and dynamic image stabilization. Ü – 81
[Image Stabilizer] Turns image stabilization on/off. Ü – 81
[Powered IS] Turns the Powered IS image stabilizer on/off. Ü – 81
[LCD Setup]
Opens the [
¢
Monitoring Setup] menu page with the settings for adjusting the
LCD screen.
Ü Ü 190
[VF Setup]
Opens the [
¢
Monitoring Setup] menu page with the settings for adjusting the
viewfinder.
Ü Ü 29
[OSD Output: All],
[OSD Output: SDI],
[OSD Output: HDMI]
Turns the camera’s on screen displays on/off. Ü Ü 145
[OSD Opacity: All],
[OSD Opacity: LCD],
[OSD Opacity: VF],
[OSD Opacity: SDI],
[OSD Opacity: HDMI]
Changes the transparency level of on screen displays. Ü Ü 146
[DISP] Changes the onscreen display level. Ü Ü 46
[Markers: All],
[Markers: LCD],
[Markers: VF],
[Markers: SDI],
[Markers: HDMI]
Turns onscreen markers on/off. Ü – 82
[Color Bars] Turns color bars on/off. Ü – 98
Function name Description
CAMERA
mode
MEDIA
mode
A