Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
Custom Picture Settings
122
Deleting a Look File
You can delete Look Files registered in custom picture files.
1 Select a custom picture file (A 119).
2 Select > [
/
Custom Picture] > [Edit
/
File] > [Look File Setup] > [Delete] > [OK].
• The Look File will be deleted and the image quality adjustments will be reversed to the original settings of the
selected custom picture file.
Saving a Custom Picture File
Copying Custom Picture Files
You can copy custom picture files between the camera and SD card. Insert in advance into the camera the card
where you want to save your custom picture files or the card that contains the custom picture file you want to
load.
Copying a File from the Camera to an SD Card
1 Select a custom picture file (A 119).
2 Select > [
/
Custom Picture] > [Save
/
File] > [Copy to SD Card B].
3 Select the destination file on the card and then select [OK].
• Select an existing custom picture file to overwrite it or [New File] to save the settings as a new custom
picture file on the card.
4 When the confirmation message appears, press SET.
NOTES
• Custom picture files are exclusively compatible for use only with the same camera model.
Replacing a File in the Camera with a File on an SD Card
1 Select the custom picture file that you wish to replace (A 119).
2 Select > [
/
Custom Picture] > [Save
/
File] > [Load from SD Card B].
3 Select the file with the settings that you want to replicate and then select [OK].
• The file in the camera will be overwritten by the one on the card.
4 When the confirmation message appears, press SET.
Embedding the Custom Picture File in Clips (CAMERA Mode)
When you record in XF-AVC format after having set custom picture settings, you can have the custom picture file
embedded in the metadata and saved along with the clips. When displaying the information screen in MEDIA
mode, you can check the custom picture settings used at the time of recording.
Select > [Æ Recording/Media Setup] > [Metadata] > [Add / File] > [On].