Owner's Manual
Table Of Contents
- Safety Instructions
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Photos
- Adjusting Camera and Recording Settings
- Video Recording Configuration: Video Format, System Frequency, Resolution and Frame Rate
- Proxy Clips
- Sub Recording Clips
- Shutter Speed
- ISO Speed/Gain
- ND Filter
- Aperture
- White Balance
- Zoom
- Focus
- Image Stabilization
- Onscreen Markers, Zebra Patterns and False Color
- Setting the Time Code
- Synchronizing with an External Device
- Recording Audio
- Audio Format for MP4 Clips
- Recording Audio Using the Second Card Recording Functions
- Connecting an External Microphone or External Audio Input Source to the Camera
- Selecting the Audio Input Source for Audio Channels
- Adjusting the Audio Recording Level
- Advanced Audio Input Settings
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Video Scopes
- Adding Marks to Clips in CAMERA Mode
- Using Metadata
- Special Recording Modes
- Infrared Recording
- Using the RC-V100 Remote Controller
- Recording Remotely Using an NU Protocol Compatible Device
- Web Camera Function
- 4. Customization
- 5. Playback
- 6. External Connections
- 7. Network Functions
- 8. Additional Information
Saving and Loading Menu Settings
128
Saving and Loading Menu Settings
After you adjust settings in the various menus, you can save those settings in the camera or on SD card B. You
can load those settings at a later date or on another camera of the same model so that you can use that camera
in the same way.
Saving Menu Settings
1 Select > [
B
System Setup] > [Transfer Menu/
/
] > [Save].
2 Select [To Camera] or [To SD Card B] and then select [OK].
• The camera’s menu settings will be saved to the selected destination. If menu settings were previously
saved, the old file will be overwritten by the current menu settings.
Loading Menu Settings
1 Select > [
B
System Setup] > [Transfer Menu/
/
] > [Load].
2 Select [From Camera] or [From SD Card B] and then select [OK].
• The camera’s menu settings will be replaced by the settings in the previously saved file. Then, the screen will
turn black momentarily and the camera will restart.
NOTES
• The following menu settings are not saved with this operation.
- > [
v
Camera Setup] > [Color Bars]
- > [
Æ
Recording/Media Setup] > [Metadata] > [News Metadata]
- > [
Æ
Recording/Media Setup] > [Metadata] > [User Memo]
- > [
A
Assistance Functions] > [Magnification], [Magn. Output]
• The root certificate for secure FTP transfers is not saved.
• When menu settings are loaded with this operation, even protected custom picture files in the camera will be
replaced.